Client Authentication:Fedora
Fedora 11 Authentication
Introduction
The following details the setup of Fedora 11 as a desktop to authenticate users against SME. The method has been tested using Fedora installed in a VirtualBox virtual machine on a Windows XP host. It assumes login is via the gui interface.
Install Fedora
Download the Fedora .iso and install. The initial install process asks for a root password and the hostname (which defaults to localhost.localdomain. Change this to a hostname of your choice and your domain name.
<HOSTNAME>.<yourdomain>.<yourtld>
When the install has finished you need to remove the media and reboot. A gui startup process then completes the setup and installation. During this process you will be asked for a username and password to set up the first user, and also the date/time configuration.
Complete install, login and apply all updates.
Additional Packages
Use the 'System - Administration - Add/Remove Software' or yum to install additional packages
Windows file server (Note this is a group of packages under Package Collections or yum groupinstall) pam_mount libtalloc (this needs to be updated if you haven't run all the updates, else samba and the domain join don't work)
Firewall Modifications
Open the 'System - Administration - Firewall' and tick
samba samba-client
as Trusted Services. Don't forget to 'Apply'
Samba Modifications
Open 'System - Administration - Services' and enable 'smb'
Open 'System - Administration - Authentication'. This will open an 'Authentication Configuration' dialogue.
On the 'User Information' tab tick 'Enable Winbind Support' and press the 'Configure Winbind ' button. A 'Winbind Configuration' dialogue opens. Complete the boxes with the relevant information
Winbind Domain - this is the Windows Workgroup name for your SME Server Security - set this to domain Winbind Domain Controllers - this is the ip address of your SME server Template Shell - set this to /bin/bash
Press OK and change to the 'Authentication' tab. Check 'Enable Winbind Support' is ticked and press the 'Configure Winbind' button. A 'Winbind Settings' dialogue opens. Check the values are the same as above and press OK. Change to the Options tab and check the following are ticked or set
Use Shadow Passwords Password Hashing Algorithym - MD5 Local Authorization is sufficient for local users Create Home directories on first login
Now change back to the 'User Information' tab, press 'Configure Winbind' and then 'Join Domain' Close this application down.
Open an 'Applications - Accessories - Terminal' cli and change 'su' to root
Open and edit /etc/samba/smb.conf. Find the relevant lines and alter them or uncomment them as below. Some lines may not exist and may need to be added.
workgroup = <WORKGROUP> wins server = <ip of sme server> name resolve order = wins host lmhosts bcast security = domainsu password server = <ip of sme server> socket options = TCP_NODELAY idmap uid = 5000-20000 idmap gid = 5000-20000 template shell = /bin/bash template homedir = /home/%D/%U winbind enum users = yes winbind enum groups = yes winbind cache time = 10 winbind use default domain = yes
Replace <WORKGROUP> above (and below) with the 'Windows workgroup' name of your SME server. Replace <ip of sme server> above with the internal network ip address of your SME server.
To check validation of smb.conf, run
testparm
If all OK, then run
net rpc join -D <WORKGROUP> -U admin
Enter the admin password for the SME server when prompted and you should get a message,
Joined domain <WORKGROUP>
The following commands should now list users, groups and available shares respectively from the SME server
wbinfo -u wbinfo -g smbtree
Authentication Modifications
Open and edit /etc/nsswitch.conf and find the hosts: line. Change it to
hosts: files wins dns
Change to the auth-client-config tool profile directory
cd /etc/auth-client-config/profile.d
Create and edit a new file called acc-sme, and enter
[sme]
nss_group=group: compat winbind
nss_netgroup=netgroup: nis
nss_passwd=passwd: compat winbind
nss_shadow=shadow: compat
pam_account=account [success=2 new_authtok_reqd=done default=ignore] pam_winbind.so
account [success=1 default=ignore] pam_unix.so use_first_pass use_authtok
account requisite pam_deny.so
account required pam_permit.so
pam_auth=auth [success=2 default=ignore] pam_winbind.so
auth [success=1 default=ignore] pam_unix.so nullok_secure use_first_pass use_authtok
auth requisite pam_deny.so
auth required pam_permit.so
auth required pam_securetty.so
auth optional pam_mount.so enable_pam_password
pam_password=password [success=2 default=ignore] pam_unix.so obscure sha512
password [success=1 default=ignore] pam_winbind.so use_first_pass md5 use_authtok
password requisite pam_deny.so
password required pam_permit.so
password optional pam_gnome_keyring.so
pam_session=session [default=1] pam_permit.so
session requisite pam_deny.so
session required pam_permit.so
session optional pam_winbind.so
session required pam_unix.so
session required pam_mkhomedir.so skel=/etc/skel umask=0022
session optional pam_mount.so enable_pam_password
session optional pam_ck_connector.so nox11
Save the file. Apply the pam authorisation changes
auth-client-config -a -p sme
Automount User Home Directories at Login
cd /etc/security
Open and edit pam_mount.conf.xml file. Find the 'Volume Definitions' section. Add a volume line below the header
<!-- Volume Definitions --> <volume fstype="cifs" server="<SMESERVER>" path="homes" mountpoint="~/nethome" options="nosuid,nodev" />
Replace <SMESERVER> above with the samba name of your SME server. This will mount the users 'home' directory from SME into a directory called 'nethome' in their local home directory.
Login and Test
Exit the Terminal cli
Logout of Fedora.
Login as a valid SME server user on your system, just giving username and password. No need for DOMAIN\user as samba configured above to use the default Windows Workgroup
Authentication against SME should proceed and the user log in. A home directory on the local machine should be created as /home/DOMAIN/user, and a sub directory to that called 'nethome' mounted to the users home directory on the SME server. The mount point should also appear on the users gui desktop.
VirtualBox Guest Additions Installation
The autorun.sh script on the VirtualBox Guest Additions media does not run on Fedora as it requires gksu which doesn't appear to be available as a standard RedHat package. You will need to add the following packages therefore either through the 'System - Adminsitration - Add/Remove Software' or with yum at a Terminal cli command prompt
gcc kernel-headers kernel-devel
Change to the mounted Virtual Box Guest Additions CDROM, eg
cd /media/VBOXADDITIONS_3.0.10_54097
Run the relevant script for your processor type, eg for i386 processors
sh ./VBoxLinuxAdditions-x86.run
The script should run, build and install the guest additions.
Issues / ToDo
The above was tested on a VirtualBox virtual machine. The login appears to stall after username and password entered due to the mount of the home directory, but this does complete after a little while. Appears to be due to NAT traversal and WINS lookup as VM is using NAT and a different subnet. Couldn't get bridged mode to work, and haven't installed on a dedicated machine on the same subnet to confirm. Login is a little slow therefore using the VM. Perhaps someone could confirm its OK when on proper subnet.
Haven't tested the pam password configuration to see if password changes are handled correctly.
