2,569
edits
Changes
Jump to navigation
Jump to search
Line 15:
Line 15: − + − {{Note box|The SME Server supports many levels of software implementations of RAID. The number of drives you install will dictate how the server will automatically configure itself. Note: All disks must be of the same size.+ − − * Automated installation as RAID − * 1 disk: One-way RAID1 mirror − * 2 disks: Two-way RAID1 mirror − * 3-5 disks: RAID5 − * 6+ disks: RAID6 − }}
SME Server:Documentation:Administration Manual:Chapter5 (view source)
Revision as of 15:03, 26 December 2007
, 15:03, 26 December 2007→Software Mirroring
=====Software Mirroring=====
=====Software Mirroring=====
The SME Server comes by default with RAID1 disk mirroring if you install one or two drives. The server is configured to accept one drive and will function properly. You can verify the RAID1 status from the console. If you later wish to add a second drive, just add it and instruct the server via the console to create the mirror. It will take some time to build so do it during scheduled maintenance. They can be either SCSI or IDE drives.
The SME Server comes by default with RAID disk mirroring. The level of Raid depends on the number of drives installed. The server is configured to accept any number of drives and will function properly. You can verify the RAID status from the console. If you later wish to add more drives, just add them and instruct the server via the console to create the mirror. It will take some time to build so do it during scheduled maintenance. They can be either SCSI or IDE drives, but we strongly advise they are the same size and type.
There is more technical information on SME Raid at http://wiki.contribs.org/Raid
=====Hardware Mirroring=====
=====Hardware Mirroring=====