3,263
edits
Changes
Jump to navigation
Jump to search
Line 921:
Line 921: − − ===How do I setup relay Clients without authentication for trusted clients ?=== − − * For most case, you really want to allow few specific clients on your LAN or trusted networks, this is done by setting a coma separated list of ip this way (replace IP1, IP2, IP3 by valid ips). − config set qpsmtpd UnauthenticatedRelayClients IP1,IP2,IP3 − signal-event email-update − − * In some case you would have a whole dedicated network with appliances needing to send email without auth, this is done this way − db networks setprop {$network} RelayRequiresAuth disabled − signal-event email-update − − * If you want to disable auth for all your local networks − db configuration setprop qpsmtpd RelayRequiresAuth disabled − signal-event email-update − − * In case you needs are not fulfilled because you need to accommodate a list of remote IP or a sub network of a larger trusted network, you can create a custom template. Here for reference the accepted formats: − mkdir -p /etc/e-smith/templates-custom/var/service/qpsmtpd/config/relayclients − # a subnetwork by only using a prefix of full ip − echo "10.10.0.">> /etc/e-smith/templates-custom/var/service/qpsmtpd/config/relayclients/80custom − # an external ip − echo "99.10.1.23" >> /etc/e-smith/templates-custom/var/service/qpsmtpd/config/relayclients/80custom − # an external network you control − echo "164.163.12.1/30" >> /etc/e-smith/templates-custom/var/service/qpsmtpd/config/relayclients/80custom − signal-event email-update
→How do I setup relay Clients without authentication for trusted clients ?
===How do I find out who is logged into webmail and what IP number.===
===How do I find out who is logged into webmail and what IP number.===
This is logged is in /var/log/messages.
This is logged is in /var/log/messages.
===How do I enable smtp authentication for users on the internal network===
===How do I enable smtp authentication for users on the internal network===