381
edits
Changes
Jump to navigation
Jump to search
Line 11:
Line 11: − + − + + + + + + + + + + + + + + + + Line 23:
Line 38: − Officially you should then need to apply the database changes etc. Whilst this is not required to be able to run the tftp server straight away, it will be required at some stage, and the server manager will remind you to, until you do.+ − − signal-event post-upgrade − signal-event reboot − − The tftpd status is controlled via the Thin Clients server-manager panel if you have installed my [[Thinclient|smeserver-thinclient]] contrib. − + − + − + − service tftpd restart + Line 94:
Line 104: − + − + − + − + − + − + Line 121:
Line 131: − + + + Line 266:
Line 278: − Line 279:
Line 290: − + − https://wiki.koozali.org/Thinclient+ − − This can aid with basic tftpd setup. − There is also a distro called [https://sourceforge.net/projects/thinstation/ Thinstation] This PXE it's own Linux distro that can be used a thin client.+ Line 294:
Line 303: − +
use systemctl rather than service (for restart)
=== Requires ===
=== Requires ===
*smeserver >= 7.0
*smeserver >= 10.0
*tftp-server >= 0.39
*tftp-server >= 0.49
For a lot of linux distros you will need nfs support
https://wiki.koozali.org/NFS
You will a /etc/exports line similar to this:
/tftpboot/ *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
<syntaxhighlight lang="bash">
mkdir -p /etc/e-smith/templates-custom/etc/exports/
echo "/tftpboot/ *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)" > /etc/e-smith/templates-custom/etc/exports/30tftp
expand-template /etc/exports
</syntaxhighlight>
/tftpboot/images/ubunturescue_1104/ *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
if you have installed smeserver-nfs
=== Installation ===
=== Installation ===
yum --enablerepo=smecontribs --enablerepo=base install smeserver-tftp-server
yum --enablerepo=smecontribs --enablerepo=base install smeserver-tftp-server
The tftp status can be controlled via the Thin Clients server-manager panel if you have installed my [[Thinclient|smeserver-thinclient]] contrib.
If you haven't, you'll need to enable the tftp server
If you haven't, you'll need to enable the tftp server manually from the shell (logged in as root)
config setprop tftpd status enabled
config setprop tftp status enabled
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
If for any reason the tftp server isn't running, try:
If for any reason the tftp server isn't running, try:
systemctl restart tftp
=== Defaults ===
=== Defaults ===
These settings can be set/changed via
These settings can be set/changed via
config setprop tftpd <prop> <value>
config setprop tftp <prop> <value>
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
<nowiki>*1</nowiki> blksize does not have a default entry in the configuration database. It can be added as above or removed via
<nowiki>*1</nowiki> blksize does not have a default entry in the configuration database. It can be added as above or removed via
see Bug 10646 for updated tftp contrib with addition of default setting
see Bug 10646 for updated tftp contrib with addition of default setting
config delprop tftpd blksize
config delprop tftp blksize
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
<nowiki>*2</nowiki> refuse does not have a default entry in the configuration database. It can be added as above or removed via
<nowiki>*2</nowiki> refuse does not have a default entry in the configuration database. It can be added as above or removed via
config delprop tftpd refuse
config delprop tftp refuse
signal-event tftpd-conf
signal-event smeserver-tftp-server-update
===Setup PXE Booting===
===Setup PXE Booting===
Finally, create the directory "/tftpboot/pxelinux.cfg". The configuration file (equivalent of syslinux.cfg -- see the SYSLINUX FAQ for the options here) will live in this directory.
Finally, create the directory "/tftpboot/pxelinux.cfg". The configuration file (equivalent of syslinux.cfg -- see the SYSLINUX FAQ for the options here) will live in this directory.
The actual linux image needs to be extracted here:
The actual linux image and any associated files need to be extracted from a source distribution ISO here:
/tftpboot/images/{name_of_distro}
/tftpboot/images/{name_of_distro}
====Menus====
====Menus====
append initrd=initrd.img boot=live config components union=overlay username=user noswap noeject ip= vga=788 fetch=http://192.168.10.1/computer/filesystem.squashfs
append initrd=initrd.img boot=live config components union=overlay username=user noswap noeject ip= vga=788 fetch=http://192.168.10.1/computer/filesystem.squashfs
</pre>
</pre>
===Voip Phones===
===Voip Phones===
Most Voip phone scan read a config file based on their MAC address to configure themselves during boot.
Most Voip phone scan read a config file based on their MAC address to configure themselves during boot.
This can takea while to set up but is a massive time saver.
This can take a while to set up but is a massive time saver.
===Related Contribs===
===Related Contribs===
[[Thinclient|smeserver-thinclient]]
This can aid with basic tftp setup.
=== Uninstall ===
=== Uninstall ===
If you want to fully clean up, by removing the entries from the configuration database
If you want to fully clean up, by removing the entries from the configuration database
config delete tftpd
config delete tftp
=== Source ===
=== Source ===