3,254
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + + + + + + Line 7:
Line 13: − + − There is a separate Howto for installing the [http://wiki.contribs.org/Funambol Funambol] middleware that allows SyncML mobile device synchronisation with SOGo.+ + − ==== Maintainer ====+ − − + + + − + − + + + + + + + + − * For SME 8 , You need to activate '''[[Stephdl]]''', [[epel]] and sogo repository+ + + + + − db yum_repositories set stephdl repository \+ − BaseURL http://mirror.de-labrusse.fr/smeserver/\$releasever \+ − EnableGroups no GPGCheck yes \+ − Name "Mirror de Labrusse" \+ − GPGKey http://mirror.de-labrusse.fr/RPM-GPG-KEY \+ − Visible yes status disabled+ − + − db yum_repositories set sogo repository \+ − BaseURL http://inverse.ca/downloads/SOGo/RHEL5/\$basearch \+ − EnableGroups yes \+ − GPGCheck no \+ − Name "Inverse SOGo Repository" \+ − Visible yes \ − status disabled − db yum_repositories set epel repository \+ − Name 'Epel - EL5' \ − BaseUrl 'http://download.fedoraproject.org/pub/epel/5/$basearch' \ − MirrorList 'http://mirrors.fedoraproject.org/mirrorlist?repo=epel-5&arch=$basearch' \ − EnableGroups no \ − GPGCheck yes \ − GPGKey http://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL \ − Visible no \ − status disabled − + + + + + + + + + + + + + − {{Warning box|due to the limitation of dovecot 1.0 in SME server 8.0, you cannot use sogo (superior of 2.0 version) without bugs. If it is absolutely needed (eg : you should use SME9) you can install smeserver-dovecot from firewall-services : https://wikit.firewall-services.com/doku.php/smedev/dovecot}}+ − * For SME 9 , You need to activate '''[[Stephdl]]''', [[epel]], [[fws]] and sogo repository − db yum_repositories set stephdl repository \+ − BaseURL http://mirror.de-labrusse.fr/smeserver/\$releasever \ − EnableGroups no GPGCheck yes \ − Name "Mirror de Labrusse" \ − GPGKey http://mirror.de-labrusse.fr/RPM-GPG-KEY \ − Visible yes status disabled − − db yum_repositories set sogo repository \ − BaseURL http://inverse.ca/downloads/SOGo/RHEL6/\$basearch \ − EnableGroups yes \ − GPGCheck no \ − Name "Inverse SOGo Repository" \ − Visible yes \ − status disabled − − db yum_repositories set epel repository \ − Name 'Epel - EL6' \ − BaseUrl 'http://download.fedoraproject.org/pub/epel/6/$basearch' \ − MirrorList 'http://mirrors.fedoraproject.org/mirrorlist?repo=epel-6&arch=$basearch' \ − EnableGroups no \ − GPGCheck yes \ − GPGKey http://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL \ − Visible no \ − status disabled − − db yum_repositories set fws repository \ − BaseURL http://repo.firewall-services.com/centos/\$releasever \ − EnableGroups no GPGCheck yes \ − Name "Firewall Services" \ − GPGKey http://repo.firewall-services.com/RPM-GPG-KEY \ − Visible yes status disabled − signal-event yum-modify − ====For SME 8.x==== + − + Line 98:
Line 87: + + + + + + − ====For SME 9.x==== + − + + + + + + + + + + + + + + + Line 108:
Line 117: + + − === memcached - libevent ===+ − {{Note box|take extreme caution here are extra repos are enabled - if you get the error memcached is required (perhaps an older version is installed), you will need to install manually from the epel repo.}} − Many users have experienced the following dependencies errors (or some kind of them) while trying to install/update SOGo or simply trying to update SME with yum update: − memcached-1.4.2-1.el5.i386 from sogo has depsolving problems − --> Missing Dependency: libevent-1.1a.so.1 is needed by package memcached-1.4.2-1.el5.i386 (sogo) − Error: Missing Dependency: libevent-1.1a.so.1 is needed by package memcached-1.4.2-1.el5.i386 (sogo) − To solve this issue you need to install memcached form Epel; the repository can be activated according to wiki http://wiki.contribs.org/Epel . − Once configured the repository you can install memcached (The current release available is memcached-1.4.5-1.el5.i386.rpm - may 2012): − yum --enablerepo=epel install memcached − Now you will be able to install/update SOGo and run yum update fine too. − === Usage ===+ Line 127:
Line 129: − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − ===Documentation===+ Line 138:
Line 196: − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 156:
Line 255: − isi:updateURL="http://sogo-demo.inverse.ca/plugins/updates.php?plugin=%ITEM_ID%&version=%ITEM_VERSION%&platform=%PLATFORM%">+ − <li>+ − <Description+ − em:id="sogo-integrator@inverse.ca"+ − em:name="SOGo Integrator"/>+ − </li>+ − <li>+ − <Description+ − em:id="sogo-connector@inverse.ca"+ − em:name="SOGo Connector"/>+ − </li>+ − </Seq></nowiki>+ − isi:updateURL="https://<sme server name.domain>/SOGo-plugins/updates.php?plugin=%ITEM_ID%&version=%ITEM_VERSION%&platform=%PLATFORM%">+ − <li>+ − <Description+ − em:id="sogo-integrator@inverse.ca"+ − em:name="SOGo Integrator"/>+ − </li>+ − <li>+ − <Description+ − em:id="sogo-connector@inverse.ca"+ − em:name="SOGo Connector"/>+ − </li>+ − <li>+ − <Description+ − em:id="{e2fda1a4-762b-4020-b5ad-a41df1933103}"+ − em:name="Lightning"/>+ − </li>+ − </Seq></nowiki>+ Line 195:
Line 294: − /* updates.php - this file is part of SOGo+ − *+ − * Copyright (C) 2006-2009 Inverse inc.+ − *+ − * Author: Wolfgang Sourdeau <wsourdeau@inverse.ca>+ − *+ − * This file is free software; you can redistribute it and/or modify+ − * it under the terms of the GNU General Public License as published by+ − * the Free Software Foundation; either version 2, or (at your option)+ − * any later version.+ − *+ − * This file is distributed in the hope that it will be useful,+ − * but WITHOUT ANY WARRANTY; without even the implied warranty of+ − * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the+ − * GNU General Public License for more details.+ − *+ − * You should have received a copy of the GNU General Public License+ − * along with this program; see the file COPYING. If not, write to+ − * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,+ − * Boston, MA 02111-1307, USA.+ − */+ − + − /* This script handles the automatic propagation of extensions pertaining to a+ − SOGo site. It requires PHP 4.1.0 or later. */+ − $plugins+ − = array( "sogo-connector@inverse.ca"+ − => array( "application" => "thunderbird",+ − "version" => "0.99",+ − "filename" => "sogo-connector-0.99.xpi" ),+ − "sogo-integrator@inverse.ca"+ − => array( "application" => "thunderbird",+ − "version" => "0.99",+ − "filename" => "sogo-integrator-0.99-sogo.xpi" ),+ − "{e2fda1a4-762b-4020-b5ad-a41df1933103}"+ − => array( "application" => "thunderbird",+ − "version" => "0.9.9",+ − "filename" => "lightning-0.9.9-inverse.win32.xpi" ));+ − + − $applications+ − = array( "thunderbird" => "<em:id>{3550f703-e582-4d05-9a08-453d09bdfdc6}</em:id>+ − <em:minVersion>1.5</em:minVersion>+ − <em:maxVersion>2.0.*</em:maxVersion>",+ − "firefox" => "<em:id>{ec8030f7-c20a-464f-9b0e-13a3a9e97384}</em:id>+ − <em:minVersion>1.5</em:minVersion>+ − <em:maxVersion>2.0.*</em:maxVersion>" );+ − + − $pluginname = $_GET["plugin"];+ − $plugin =& $plugins[$pluginname];+ − $application =& $applications[$plugin["application"]];+ − + − if ( $plugin ) {+ − $platform = $_GET["platform"];+ − if ( $platform+ − && file_exists( $platform . "/" . $plugin["filename"] ) ) {+ − $plugin["filename"] = $platform . "/" . $plugin["filename"];+ − }+ − elseif ( !file_exists( $plugin["filename"] ) ) {+ − $plugin = false;+ − }+ − }+ − if ( $plugin ) {+ − header("Content-type: text/xml; charset=utf-8");+ − echo ('<?xml version="1.0"?>' . "\n");+ − ?>+ − <!DOCTYPE RDF>+ − <RDF xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#"+ − xmlns:em="http://www.mozilla.org/2004/em-rdf#">+ − <Description about="urn:mozilla:extension:<?php echo $pluginname ?>">+ − <em:updates>+ − <Seq>+ − <li>+ − <Description>+ − <em:version><?php echo $plugin["version"] ?></em:version>+ − <em:targetApplication>+ − <Description><?php echo $applications[$plugin["application"]] ?>+ − <em:updateLink>https://<sme server name.domain>/SOGo-plugins/<?php echo $plugin["filename"] ?></em:updateLink>+ − </Description>+ − </em:targetApplication>+ − </Description>+ − </li>+ − </Seq>+ − </em:updates>+ − </Description>+ − </RDF>+ − <?php+ − } else {+ − header("Content-type: text/plain; charset=utf-8", true, 404);+ − echo( 'Plugin not found' );+ − }+ − ?></nowiki>+ Line 297:
Line 396: − === Mixed warnings ===+ Line 321:
Line 420: − === Reference ===+ − http://smeserver.nethesis.it/sogo/+ − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Requirements
{{usefulnote}}
==Version==
{{#smeversion: smeserver-sogo }}
[[Version::contrib9|stephdl]][[Has SME9::true| ]]
== SOGo - Scaleable OpenGroupware.org ==
== SOGo - Scaleable OpenGroupware.org ==
SOGo provides a rich AJAX-based Web interface and supports multiple native clients through the use of standard protocols such as CalDAV, CardDAV and GroupDAV.
SOGo provides a rich AJAX-based Web interface and supports multiple native clients through the use of standard protocols such as CalDAV, CardDAV and GroupDAV.
Once configured, SOGo offers multiple ways to access the calendaring and messaging data. Your users can either use a web browser, Mozilla Thunderbird, Apple iCal, or a mobile device to access the same information.
Once configured, SOGo offers multiple ways to access the calendaring and messaging data. Your users can either use a web browser, Mozilla Thunderbird, Apple iCal, or a mobile device to access the same information. SOGo provides native Microsoft ActiveSync support. Mobile devices such as Apple iPhone, Android, Windows Phone, and BlackBerry 10 can fully synchronize emails, contacts, events and tasks with SOGo.
=== Maintainer ===
[mailto:stephdl@de-labrusse.fr Stéphane de Labrusse] AKA [[User:Stephdl|Stephdl]]
and for SME10 [mailto:brianr@koozali.org Brian Read] AKA [[User:brianr|brianr]]
[mailto:stephdl@de-labrusse.fr Stéphane de Labrusse] AKA [[User:Stephdl|Stephdl]]
The original work has been made by [http://www.nethesis.it/ nethesis]. Many thanks to all previous developers
The original work has been made by [http://www.nethesis.it/ nethesis]. Many thanks to all previous developers
=== Requirements ===
=== Requirements ===
The latest SOGo requires SME10, the SME8 and 9 instructions are left for legacy systems only.
= For SME10 =
SOGo requires SME 8 or SME 9
In order to get the latest stable SOGo you need a support contract as described [https://www.sogo.nu/support.html#/commercial here] and [https://www.sogo.nu/support/faq/how-to-install-sogo-and-sope-through-yum.html here]
=== Install ===
Otherwise you can install SOGo from the nightly build as follows:<syntaxhighlight lang="shell">
db yum_repositories set sogo repository \
BaseURL 'http://packages.inverse.ca/SOGo/nightly/5/rhel/$releasever/$basearch' \
EnableGroups yes \
GPGCheck no \
Name 'Inverse Sogo5 Repository' \
Visible yes \
status disabled
signal-event yum-modify
</syntaxhighlight>If you have a support contract, then edit the above to the stable repo and add in the username and password as described in the link above.
and then:<syntaxhighlight lang="shell">
yum install smeserver-extrarepositories-epel -y
yum install smeserver-sogo --enablerepo=sogo,epel,smecontribs,smetest -y
</syntaxhighlight>Pro Tem you may need to add smetest to the enablerepo list above to pick up the latest version of smeserver-sogo. Once it is verified it will be copied to smecontribs.
Once you have picked up the nightly version then you will not update it unless you specifically add the sogo repo to the yum update command:<syntaxhighlight lang="shell">
yum update --enablerepo=sogo
</syntaxhighlight>
= For SME 8 =
== Install SOGO 2 ==
{{Note box| due to the version of dovecot, I cannot maintain sogo for sme8, please upgrade to sme9}}
You need to activate '''[[Stephdl]]''', '''[[epel]]''' and '''[[Sogo-repo|sogo repository]]'''
{{Warning box|due to the limitation of dovecot 1.0 in SME server 8.0, you cannot use sogo (superior of 2.0 version) without bugs. If it is absolutely needed (eg : you should use SME9) you can install smeserver-dovecot from firewall-services : https://wikit.firewall-services.com/doku.php/smedev/dovecot}}
signal-event yum-modify
This contrib is currently held in several repositories, so the following commands will install it on your smeserver.
For SME 8 , You need to activate '''[[Stephdl]]''', [[epel]] and '''[[Sogo-repo|sogo repository]]'''
yum --enablerepo=stephdl,epel,sogo install smeserver-sogo
You will then need to activate the database changes etc.
The 'official' way is to perform
signal-event post-upgrade; signal-event reboot
or if you don't want to reboot your server
signal-event sogo-modify; config set UnsavedChanges no
= For SME 9 =
== Install SOGO 2 ==
You need to activate '''[[Stephdl]]''', [[epel]] and '''[[Sogo-repo|sogo repository]]'''
This contrib is currently held in several repositories, so the following commands will install it on your smeserver.
This contrib is currently held in several repositories, so the following commands will install it on your smeserver.
For SME 9 , You need to activate '''[[Stephdl]]''', '''[[epel]]'''and '''[[Sogo-repo|sogo repository]]'''
yum --enablerepo=stephdl,epel,sogo install smeserver-sogo
yum --enablerepo=stephdl,epel,sogo,fws install smeserver-sogo
You will then need to activate the database changes etc.
You will then need to activate the database changes etc.
signal-event post-upgrade; signal-event reboot
signal-event post-upgrade; signal-event reboot
or if you don't want to reboot your server
signal-event sogo-modify; config set UnsavedChanges no
== Install SOGO 3 (ONLY SME9)==
=== First installation===
This contrib is currently held in several repositories, so the following commands will install it on your smeserver.
This contrib is currently held in several repositories, so the following commands will install it on your smeserver.
For SME 9 , You need to activate '''[[Stephdl]]''', '''[[epel]]''' and '''[[Sogo-repo|sogo repository]]'''
yum --enablerepo=stephdl,epel,sogo,fws install smeserver-sogo
yum --enablerepo=stephdl,epel,sogo3,fws install smeserver-sogo
You will then need to activate the database changes etc.
The 'official' way is to perform
signal-event post-upgrade; signal-event reboot
or if you don't want to reboot your server
signal-event sogo-modify; config set UnsavedChanges no
===Upgrade from sogo2===
For SME 9 , You need to activate '''[[Stephdl]]''', '''[[epel]]''', '''[[fws]]''' and '''[[Sogo-repo|sogo repository]]'''
signal-event yum-modify
yum update --enablerepo=sogo3
yum reinstall sope\* --enablerepo=sogo3
You will then need to activate the database changes etc.
You will then need to activate the database changes etc.
signal-event post-upgrade; signal-event reboot
signal-event post-upgrade; signal-event reboot
or if you don't want to reboot your server
signal-event sogo-modify; config set UnsavedChanges no
<headertabs />
= Usage =
To access webmail and calenders, open the url http://yourdomain.net/SOGo
To access webmail and calenders, open the url http://yourdomain.net/SOGo
If you disable webmail access from within SmeServer email panel, opening http://yourdomain.net/webmail you'll be redirected to SOGo.
If you disable webmail access from within SmeServer email panel, opening http://yourdomain.net/webmail you'll be redirected to SOGo.
=== Log===
=DB=
On SME9 and SME10
sogod=service
ACLsSendEMailNotifications=NO
ActiveSync=disabled
AdminUsers=admin
DbPassword=NjPvjv3SPxb+s37.AKPGGGjFIeQJykYoPnL9oI.48d8qhsW3luZhQnMqrGurcBGU3Q23w77gp1+o
DraftsFolder=Drafts
SpamFolder=Junk
EnableEMailAlarms=NO
LdapTCPPort=389
MailAuxiliaryUserAccountsEnabled=YES
PublicAccess=NO
SOGoInternalSyncInterval=60
SOGoMaximumPingInterval=3540
SOGoMaximumSyncInterval=3540
SOGoMaximumSyncResponseSize=2048
SOGoMaximumSyncWindowSize=100
SentFolder=Sent
SessionDuration=1440
TCPPort=20000
TrashFolder=Trash
WOWatchDogRequestTimeout=3600
WOWorkersCount=10
status=enabled
After a modification (for SME10):
signal-event smeserver-sogo-update
SME9 requires a call to sogo-modify
= Sieve integration (SME 9 and maybe SME10) =
Installing SOGo on SME 9 according to the instructions above also installs [[smeserver-dovecot-extras]] as a dependency. In order to make full use of sieve functionality in SOGo (such as auto expiration of vacation messages), make sure that the following property is enabled in the configuration database:
db configuration setprop dovecot AdminIsMaster enabled
signal-event email-update
= Special Settings (SME 9 and maybe SME10!) =
Sogo is full of settings that I cannot provide all, please read the [http://www.sogo.nu/files/docs/SOGo%20Installation%20Guide.pdf sogo's book]
Now when you want to add a specific option, 'SOGoMailComposeMessageType html' per example
vim /etc/e-smith/templates/etc/sogo/sogo.conf/80MYOPTIONS
Add you modifications (contrary is 'text')
SOGoMailComposeMessageType = html;
Expand and restart sogo
signal-event smeserver-sogo-update
If you want to go back, then
rm -f /etc/e-smith/templates/etc/sogo/sogo.conf/80MYOPTIONS
signal-event smeserver-sogo-update
= Log =
All events are logged in the relevant log file
All events are logged in the relevant log file
less /var/log/sogo/sogo.log
less /var/log/sogo/sogo.log
= Documentation =
[http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CCUQFjAB&url=http%3A%2F%2Fwww.sogo.nu%2Ffiles%2Fdocs%2FSOGo%2520Installation%2520Guide.pdf&ei=dAXxU8KGL6Sw0QX4roHQDQ&usg=AFQjCNGmKQcY8gebCyEoxZsK--yo4Cbx9Q&bvm=bv.73231344,d.d2k Please RTFM] instead of raising bugs against smeserver-sogo :)
[http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CCUQFjAB&url=http%3A%2F%2Fwww.sogo.nu%2Ffiles%2Fdocs%2FSOGo%2520Installation%2520Guide.pdf&ei=dAXxU8KGL6Sw0QX4roHQDQ&usg=AFQjCNGmKQcY8gebCyEoxZsK--yo4Cbx9Q&bvm=bv.73231344,d.d2k Please RTFM] instead of raising bugs against smeserver-sogo :)
You can fine tune thunderbird to be a pure "heavy" client for SOGo. [http://www.sogo.nu/files/docs/SOGo%20Mozilla%20Thunderbird%20Configuration.pdf See the Documentation]
You can fine tune thunderbird to be a pure "heavy" client for SOGo. [http://www.sogo.nu/files/docs/SOGoMozillaThunderbirdConfigurationGuide.pdf See the Documentation]
=== Thunderbird Configuration ===
=Fine tune SOGo=
Sogo must be [https://sogo.nu/files/docs/SOGoInstallationGuide.html#_microsoft_enterprise_activesync_tuning tuned] following the number of users, some settings can be tested.
Keep in mind to set one worker per user for the activesync connection.
* 100 users, 10 EAS devices
config setprop sogod WOWorkersCount 15
config setprop sogod SOGoMaximumPingInterval 3540
config setprop sogod SOGoMaximumSyncInterval 3540
config setprop sogod SOGoInternalSyncInterval 30
signal-event smeserver-sogo-update
* 100 users, 20 EAS devices
config setprop sogod WOWorkersCount 25
config setprop sogod SOGoMaximumPingInterval 3540
config setprop sogod SOGoMaximumSyncInterval 3540
config setprop sogod SOGoInternalSyncInterval 40
signal-event smeserver-sogo-update
* 1000 users, 100 EAS devices
config setprop sogod WOWorkersCount 120
config setprop sogod SOGoMaximumPingInterval 3540
config setprop sogod SOGoMaximumSyncInterval 3540
config setprop sogod SOGoInternalSyncInterval 60
signal-event smeserver-sogo-update
==ImapMaxLineLength==
Maximum IMAP command line length in kilo bytes. Some clients generate very long command lines with huge mailboxes, so you may need to raise this if you get "Too long argument" or "IMAP command line too large" errors often.
set by default to 2048KB
config setprop dovecot ImapMaxLineLenght 2048
signal-event smeserver-sogo-update
= Thunderbird Configuration =
You are encouraged to use Thunderbird ESR (Extended Support Release) and corresponding compatible Lightning plugin. According to Mozilla Team "Thunderbird Extended Support Release (ESR) is intended for groups who deploy and maintain the desktop environment in large organizations such as universities and other schools, county or city governments and businesses".
You are encouraged to use Thunderbird ESR (Extended Support Release) and corresponding compatible Lightning plugin. According to Mozilla Team "Thunderbird Extended Support Release (ESR) is intended for groups who deploy and maintain the desktop environment in large organizations such as universities and other schools, county or city governments and businesses".
<nowiki><Seq about="http://inverse.ca/sogo-integrator/extensions"
<nowiki><Seq about="http://inverse.ca/sogo-integrator/extensions"
isi:updateURL="http://sogo-demo.inverse.ca/plugins/updates.php?plugin=%ITEM_ID%&version=%ITEM_VERSION%&platform=%PLATFORM%">
<li>
<Description
em:id="sogo-integrator@inverse.ca"
em:name="SOGo Integrator"/>
</li>
<li>
<Description
em:id="sogo-connector@inverse.ca"
em:name="SOGo Connector"/>
</li>
</Seq></nowiki>
To read: (change the server address to your server and add the Lightning plugin to the extensions list): (Then save the "extensions.rdf" back to the same place in the "sogo-integrator-<version>-sogo.xpi" file and then save the .xpi file back on the server in the "\\<SME server name>\Primary\hmtl\SOGo-plugins\WINNT_x86-msvc" folder.)
To read: (change the server address to your server and add the Lightning plugin to the extensions list): (Then save the "extensions.rdf" back to the same place in the "sogo-integrator-<version>-sogo.xpi" file and then save the .xpi file back on the server in the "\\<SME server name>\Primary\hmtl\SOGo-plugins\WINNT_x86-msvc" folder.)
<nowiki><Seq about="http://inverse.ca/sogo-integrator/extensions"
<nowiki><Seq about="http://inverse.ca/sogo-integrator/extensions"
isi:updateURL="https://<sme server name.domain>/SOGo-plugins/updates.php?plugin=%ITEM_ID%&version=%ITEM_VERSION%&platform=%PLATFORM%">
<li>
<Description
em:id="sogo-integrator@inverse.ca"
em:name="SOGo Integrator"/>
</li>
<li>
<Description
em:id="sogo-connector@inverse.ca"
em:name="SOGo Connector"/>
</li>
<li>
<Description
em:id="{e2fda1a4-762b-4020-b5ad-a41df1933103}"
em:name="Lightning"/>
</li>
</Seq></nowiki>
5.) Create the file "updates.php" in the "SOGo-plugins" folder
5.) Create the file "updates.php" in the "SOGo-plugins" folder
<nowiki><?php
<nowiki><?php
/* updates.php - this file is part of SOGo
*
* Copyright (C) 2006-2009 Inverse inc.
*
* Author: Wolfgang Sourdeau <wsourdeau@inverse.ca>
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
/* This script handles the automatic propagation of extensions pertaining to a
SOGo site. It requires PHP 4.1.0 or later. */
$plugins
= array( "sogo-connector@inverse.ca"
=> array( "application" => "thunderbird",
"version" => "0.99",
"filename" => "sogo-connector-0.99.xpi" ),
"sogo-integrator@inverse.ca"
=> array( "application" => "thunderbird",
"version" => "0.99",
"filename" => "sogo-integrator-0.99-sogo.xpi" ),
"{e2fda1a4-762b-4020-b5ad-a41df1933103}"
=> array( "application" => "thunderbird",
"version" => "0.9.9",
"filename" => "lightning-0.9.9-inverse.win32.xpi" ));
$applications
= array( "thunderbird" => "<em:id>{3550f703-e582-4d05-9a08-453d09bdfdc6}</em:id>
<em:minVersion>1.5</em:minVersion>
<em:maxVersion>2.0.*</em:maxVersion>",
"firefox" => "<em:id>{ec8030f7-c20a-464f-9b0e-13a3a9e97384}</em:id>
<em:minVersion>1.5</em:minVersion>
<em:maxVersion>2.0.*</em:maxVersion>" );
$pluginname = $_GET["plugin"];
$plugin =& $plugins[$pluginname];
$application =& $applications[$plugin["application"]];
if ( $plugin ) {
$platform = $_GET["platform"];
if ( $platform
&& file_exists( $platform . "/" . $plugin["filename"] ) ) {
$plugin["filename"] = $platform . "/" . $plugin["filename"];
}
elseif ( !file_exists( $plugin["filename"] ) ) {
$plugin = false;
}
}
if ( $plugin ) {
header("Content-type: text/xml; charset=utf-8");
echo ('<?xml version="1.0"?>' . "\n");
?>
<!DOCTYPE RDF>
<RDF xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:em="http://www.mozilla.org/2004/em-rdf#">
<Description about="urn:mozilla:extension:<?php echo $pluginname ?>">
<em:updates>
<Seq>
<li>
<Description>
<em:version><?php echo $plugin["version"] ?></em:version>
<em:targetApplication>
<Description><?php echo $applications[$plugin["application"]] ?>
<em:updateLink>https://<sme server name.domain>/SOGo-plugins/<?php echo $plugin["filename"] ?></em:updateLink>
</Description>
</em:targetApplication>
</Description>
</li>
</Seq>
</em:updates>
</Description>
</RDF>
<?php
} else {
header("Content-type: text/plain; charset=utf-8", true, 404);
echo( 'Plugin not found' );
}
?></nowiki>
(You will have to update this file everytime you update the plugins.)
(You will have to update this file everytime you update the plugins.)
To configure other devices refer to website; look however at SOGo official up-to-date front-end software and documentation with latest upgrades for server, client and device configuration (http://www.sogo.nu/downloads/frontends.html - http://www.sogo.nu/downloads/documentation.html).
To configure other devices refer to website; look however at SOGo official up-to-date front-end software and documentation with latest upgrades for server, client and device configuration (http://www.sogo.nu/downloads/frontends.html - http://www.sogo.nu/downloads/documentation.html).
= Mixed warnings =
You can experience some problem with IMAP authentication: you can login to SOGo but you can't see mail messages; only admin can see his mail.
You can experience some problem with IMAP authentication: you can login to SOGo but you can't see mail messages; only admin can see his mail.
Looking at sogo log you can find erros like this:
Looking at sogo log you can find erros like this:
http://forums.contribs.org/index.php/topic,51038.0.html
http://forums.contribs.org/index.php/topic,51038.0.html
= Reference =
https://wiki.nethserver.org/doku.php?id=sogo&s
http://www.sogo.nu/english/support/documentation.html
http://www.sogo.nu/english/support/documentation.html
<noinclude>[[Category:Contrib]]
=Upgrade=
[[Category:Groupware]]</noinclude>
yum --enablerepo=stephdl,epel,sogo update smeserver-sogo sogo\* libmemcached
signal-event smeserver-sogo-update
=Uninstall=
yum remove sope* libwbxml gnustep* smeserver-sogo xmlsec* \
memcached python-memcached sogo* dovecot-pigeonhole smeserver-dovecot-extras libobjc libmemcached
=Bugzilla=
==Open==
{{#bugzilla:columns=id,status,component,version,summary
|component=smeserver-sogo
|sort=id
|order=desc
|disablecache=1
|noresultsmessage="Well done guys, no more open bugs!"}}
==Closed==
{{#bugzilla:columns=id,status,component,version,summary
|component=smeserver-sogo
|status=CLOSED
|version=!8.0
|sort=id
|order=desc
|disablecache=1
|noresultsmessage="Well done guys, no more open bugs!"}}
<noinclude>
[[Category:Contrib]]
[[Category:Groupware]]
[[Category:Mail]]
</noinclude>
=Changelog=
Only released version in smecontrib are listed here.
{{ #smechangelog: smeserver-sogo }}