167
edits
Changes
Jump to navigation
Jump to search
Line 73:
Line 73: − − − == SME Server as a Host server == − === Phpvirtualbox === − * [[Phpvirtualbox]] SME Contrib Line 84:
Line 79: + − This is based on work by Daniel here :+ − + − https://wikit.firewall-services.com/doku.php/tuto/virtualisation/netwok_conf_sur_dedibox+ − + − − − − − Some assumptions : − − Your main IP address : − − Ip address 62.20.20.250 − Netmask 255.255.255.0 − Gateway 62.20.20.1 − − Your secondary IP address : − − 200.30.30.1 − 10:10:00:00:20:20 - you DID set the MAC didn't you ? − − Proxmox. − − Make sure you set your default keyboard - it makes life much easier ! − − We will use the vmbr0 that is set up, but we need to create a dummy one so we can put SME in server/gateway mode and use Daniels scripts. − − Create a new network interface. Call it vmbr1 − Do NOT set IP address/subnet/bridge ports etc.+ + + + + − Next, create your KVM for SME. Make sure that you give it two network adaptors - one is vmbr0 and one is vmbr1+ + + − vmbr0 should have the following settings : − Model : virtio+ − MAC : 10:10:00:00:20:20 (as per your mac that you set) − After you have created the KVM add a second adaptor :+ − + − + − + + + + + + + + + + Line 139:
Line 124: − + − + − + − + + + + − db configuration set ExternalIP 200.30.30.1+ − db configuration set ExternalNetmask 255.255.255.255 − db configuration set GatewayIP 62.20.20.1 − /etc/e-smith/events/actions/initialize-default-databases − − − + − + − Line 175:
Line 157: + + − expand-template / etc / sysconfig / network-scripts / ifcfg-$ ( db configuration getProp ExternalInterface Name ) + − expand-template / etc / sysconfig / network-scripts / route-$ ( db configuration getProp ExternalInterface Name )+ − − − − − − You should now be able to connect to your Proxmox box on your primary IP address, and your SME server on your added IP − − Your network setting should look similar to this :+ − + − + − + − + − + + − + − + − + − + − + − + − + − − + Line 217:
Line 194: − + − + + − === Xen ===+ − === QEMU/KVM ===+ − + + + + + + + − + +
some wikification
Detailed info on the guest cpu(s)
Detailed info on the guest cpu(s)
cat /proc/cpuinfo
cat /proc/cpuinfo
=== Proxmox ===
=== Proxmox ===
== SME v8 on Proxmox at Online.net ==
== SME v8 on Proxmox at Online.net ==
This is based on work by Daniel here: https://wikit.firewall-services.com/doku.php/tuto/virtualisation/netwok_conf_sur_dedibox
=== Online.net configuration ===
{{Warning box|You need a second IP (failover) address. Assign it to your server and make sure you set the MAC for this IP before you do anything else - '''failure to do so may block your network !!'''<br />
''The problem is that your IP is NOT on the same network range as your gateway so we have to fool the system.''
}}
You need a second IP (failover) address. Assign it to your server and make sure you set the MAC for this IP before you do anything else - failure to do so may block your network !!!!!
The problem is that your IP is NOT on the same network range as your gateway so we have to fool the system.
Some assumptions:
;Your main IP address:
:IP address 62.20.20.250
:Netmask 255.255.255.0
:Gateway 62.20.20.1
;Your secondary IP address :
:200.30.30.1
:10:10:00:00:20:20 - you DID set the MAC didn't you ?
=== Proxmox configuration ===
{{Note box|Make sure you set your default keyboard - it makes life much easier!!}}
vmbr1 should have the following settings :
We will use the '''vmbr0''' that is set up, but we need to create a dummy one so we can put SME in server/gateway mode and use Daniels scripts:
Model : virtio
* Create a new network interface and call it '''vmbr1'''
MAC : should be the MAC of your main IP address
* Do NOT set IP address/subnet/bridge ports etc.
* Create your KVM for SME. Make sure that you give it two network adaptors - one is '''vmbr0''' and one is '''vmbr1'''
** vmbr0 should have the following settings :
::Model: virtio
::MAC: 10:10:00:00:20:20 (as per your mac that you set)
*After you have created the KVM add a second adaptor:
**vmbr1 should have the following settings:
::Model: virtio
::MAC: should be the MAC of your main IP address
It doesn't matter which one is 0 or 1 as long as the settings are correct.
It doesn't matter which one is 0 or 1 as long as the settings are correct.
=== SME Configuration ===
Now do your standard SME installation.
Now do your standard SME installation.
you can use your second IP address for the external interface, but you will have to set a subnet mask and gateway IP that it likes e.g.:
you can use your second IP address for the external interface, but you will have to set a subnet mask and gateway IP that it likes e.g.:
:IP : 200.30.30.1
IP : 200.30.30.1
:Subnet : 255.255.255.0
Subnet : 255.255.255.0
:Gateway : 200.30.30.1
Gateway : 200.30.30.1
One you have rebooted your network will not be working correctly so we need to follow Daniels guide to fix it :
One you have rebooted your network will not be working correctly so we need to follow Daniels guide to fix it :
db configuration set ExternalIP 200.30.30.1
db configuration set ExternalNetmask 255.255.255.255
db configuration set GatewayIP 62.20.20.1
/etc/e-smith/events/actions/initialize-default-databases
mkdir -p /etc/e-smith/templates-custom/etc/sysconfig/network/
mkdir -p /etc/e-smith/templates-custom/etc/sysconfig/network/
echo '# GATEWAYDEV disabled for dedibox network' > /etc/e-smith/templates-custom/etc/sysconfig/network/40GATEWAYDEV
echo '# GATEWAYDEV disabled for dedibox network' > /etc/e-smith/templates-custom/etc/sysconfig/network/40GATEWAYDEV
echo ' # GATEWAY disabled for dedibox network ' > /etc/e-smith/templates-custom/etc/sysconfig/network/50GATEWAYto pass in THIS_DEVICE MORE_DATA \ n " Unless ( defined $ THIS_DEVICE ) ;
echo ' # GATEWAY disabled for dedibox network ' > /etc/e-smith/templates-custom/etc/sysconfig/network/50GATEWAYto pass in THIS_DEVICE MORE_DATA \ n " Unless ( defined $ THIS_DEVICE ) ;
my $ device = $ ExternalInterface { Name } ;
my $ device = $ ExternalInterface { Name } ;
If you have got it right then you should be able to run the following without error :
If you have got it right then you should be able to run the following without error :
expand-template /etc/sysconfig/network-scripts/ifcfg-$(db configuration getProp ExternalInterface Name)
expand-template /etc/sysconfig/network-scripts/route-$(db configuration getProp ExternalInterface Name)
Check all the network settings look correct and then:
signal-event post-upgrade;signal-event reboot
Check all the network settings look correct and then :
signal-event post-upgrade;signal-event reboot
You should now be able to connect to your Proxmox box on your primary IP address, and your SME server on your added IP.
EthernetDriver1=virtio_net
Your network setting should look similar to this:
EthernetDriver2=virtio_net
EthernetDriver1=virtio_net
ExternalDHCP=off
EthernetDriver2=virtio_net
ExternalIP=200.30.30.1
ExternalDHCP=off
ExternalInterface=interface
ExternalIP=200.30.30.1
ExternalInterface=interface
Broadcast=(whatever)
Broadcast=(whatever)
Configuration=static
Configuration=static
Driver=virtio_net
Driver=virtio_net
Gateway=62.20.20.1 (gateway for your main IP address)
Gateway=62.20.20.1 #gateway for your main IP address
HWAddress=10:10:00:00:20:20 (MAC that you set for 2nd IP address)
HWAddress=10:10:00:00:20:20 #MAC that you set for 2nd IP address
IPAddress=200.30.30.1 (your 2nd IP address)
IPAddress=200.30.30.1 #your 2nd IP address
Name=eth1
Name=eth1
Netmask=255.255.255.255
Netmask=255.255.255.255
Network=200.30.30.1 (your 2nd IP address)
Network=200.30.30.1 #your 2nd IP address
ExternalNetmask=255.255.255.255
ExternalNetmask=255.255.255.255
GatewayIP=62.20.20.1 (gateway for your main IP address)
GatewayIP=62.20.20.1 #gateway for your main IP address
Following your 'local network' and is the range when you VPN :
Following your 'local network' and is the range when you VPN :
InternalInterface=interface
InternalInterface=interface
Broadcast=192.168.98.255
Broadcast=192.168.98.255
Configuration=static
Configuration=static
Driver=virtio_net
Driver=virtio_net
HWAddress=fe:aa:16:19:e8:bf (MAC for 'virtual' adaptor)
HWAddress=fe:aa:16:19:e8:bf #MAC for 'virtual' adaptor
IPAddress=192.168.98.1
IPAddress=192.168.98.1
NICBondingOptions=miimon=200 mode=active-backup
NICBondingOptions=miimon=200 mode=active-backup
Netmask=255.255.255.0
Netmask=255.255.255.0
Network=192.168.98.0
Network=192.168.98.0
LocalIP=192.168.98.1
LocalIP=192.168.98.1
LocalNetmask=255.255.255.0
LocalNetmask=255.255.255.0
== Xen ==
== QEMU/KVM ==
=== VMware ===
<br />
= SME Server as a Host server =
== Phpvirtualbox ==
* [[Phpvirtualbox]] SME Contrib
== VMware ==
* Contribs.org [[Vmware|Wiki page]] on installing VMware on SME Server
* Contribs.org [[Vmware|Wiki page]] on installing VMware on SME Server
* Inetresting guide from [http://support.theenterprisecloud.com/kb/default.asp?id=355&Lang=1&SID= Verizon] on performance tuning.
* Interesting guide from [http://support.theenterprisecloud.com/kb/default.asp?id=355&Lang=1&SID= Verizon] on performance tuning.
[[Category:Virtualisation]]
[[Category:Virtualisation]]