Mailstats
Mailstats
Brian Read's mailstats contrib analyzes your qpsmtpd log files and sends a periodic email to the address you specify summarizing your server's email activity.
The latest version also supports storing your mail server statistics in a MySQL database. You could potentially configure several servers to store their statistics in one central database in order to get consolidated statistics from several servers.
Read the original announcement here: http://forums.contribs.org/index.php?topic=40651.0
Installation
yum install --enablerepo=smecontribs smeserver-mailstats
Configuration
If you install mailstats you should review the latest documentation, which is kept in the script itself. You can review the script after installation using:
less /usr/bin/spamfilter-stats-7.pl
The configuration options for v 0.6.21 have been listed below.
Create the report db entry
config set mailstats report
Status
config setprop mailstats Status ("enabled"|"disabled")
Column Header
Column Header entries are created and set to "yes" if a non zero count is detected (they may not exist before). "Yes" means that that column is then always shown. If you delete the entry or set it to "auto" then it will only show if a non zero occurs again (and then get set to "yes").(enable, supress or only show if nonzero)
config setprop mailstats <column header> ("yes"|"no"|"auto")
QpsmtpCodes
(default to "enabled")
config setprop mailstats QpsmtpdCodes ("enabled"|"disabled")
See this note for more information about the qpsmtpd LogLevel setting: Updating_to_SME_7.2#qpsmtpd_LogLevel
SpamAssassin rules
config setprop mailstats SARules ("enabled"|"disabled")
JunkMailList
config setprop mailstats JunkMailList ("enabled"|"disabled")
SpamAssassin Rule Percent Threshold
Set a threshold for report cutoff
config setprop mailstats SARulePercentThreshold (0.5)
Email to send report
config setprop mailstats Email (admin) - email to send report
Save data to MySQL database
(default is "no")
config setprop mailstats SaveDataToMySQL ("yes"|"no")
MySQL server hostname
(default is "localhost")
config setprop mailstats server <hostname>
MySQL server port
(default is "3306")
config setprop mailstats DBPort <####>
Reporting Interval
(default is "day")
config setprop mailstats Interval ("day"|"week"|"fortnight"|"month"|"#####"))
Note: a number is interpreted as seconds
Base
(default is "Midnight")
config setprop mailstats Base ("Midnight"|Midday"|"Now"|"##")
Note: a number is interpreted as the hour of the day (0-23)
Logging to a MySQL database
In order to log your data to a MySQL database, you will need to create a database named 'mailstats'. Here are the notes from spamfilter-stats-7.pl on what is required:
############################################################################# # # Table structure for MySQL table for saving data # # Database : `mailstats` # # -------------------------------------------------------- # # Table structure for table `ColumnStats` # # #CREATE TABLE `ColumnStats` ( # `ColumnStatsid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `timeid` int(11) NOT NULL default '0', # `descr` varchar(20) NOT NULL default '', # `count` bigint(20) NOT NULL default '0', # `servername` varchar(30) NOT NULL default '', # PRIMARY KEY (`ColumnStatsid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # -------------------------------------------------------- # # Table structure for table `JunkMailStats` # #CREATE TABLE `JunkMailStats` ( # `JunkMailstatsid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `user` varchar(12) NOT NULL default '', # `count` bigint(20) NOT NULL default '0', # `servername` varchar(30) default NULL, # PRIMARY KEY (`JunkMailstatsid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # # -------------------------------------------------------- # # Table structure for table `SARules` # #CREATE TABLE `SARules` ( # `SARulesid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `rule` varchar(50) NOT NULL default '', # `count` bigint(20) NOT NULL default '0', # `totalhits` bigint(20) NOT NULL default '0', # `servername` varchar(30) NOT NULL default '', # PRIMARY KEY (`SARulesid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # -------------------------------------------------------- # # Table structure for table `SAscores` # #CREATE TABLE `SAscores` ( # `SAscoresid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `acceptedcount` bigint(20) NOT NULL default '0', # `rejectedcount` bigint(20) NOT NULL default '0', # `hamcount` bigint(20) NOT NULL default '0', # `acceptedscore` decimal(20,2) NOT NULL default '0.00', # `rejectedscore` decimal(20,2) NOT NULL default '0.00', # `hamscore` decimal(20,2) NOT NULL default '0.00', # `totalsmtp` bigint(20) NOT NULL default '0', # `totalrecip` bigint(20) NOT NULL default '0', # `servername` varchar(30) NOT NULL default '', # PRIMARY KEY (`SAscoresid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # -------------------------------------------------------- # # Table structure for table `VirusStats` # #CREATE TABLE `VirusStats` ( # `VirusStatsid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `descr` varchar(40) NOT NULL default '', # `count` bigint(20) NOT NULL default '0', # `servername` varchar(30) NOT NULL default '', # PRIMARY KEY (`VirusStatsid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # # -------------------------------------------------------- # # Table structure for table `date` # #CREATE TABLE `date` ( # `dateid` int(11) NOT NULL auto_increment, # `date` date NOT NULL default '0000-00-00', # PRIMARY KEY (`dateid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # # -------------------------------------------------------- # # Table structure for table `domains` # #CREATE TABLE `domains` ( # `domainsid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `domain` varchar(40) NOT NULL default '', # `type` varchar(10) NOT NULL default '', # `total` bigint(20) NOT NULL default '0', # `denied` bigint(20) NOT NULL default '0', # `xfererr` bigint(20) NOT NULL default '0', # `accept` bigint(20) NOT NULL default '0', # `servername` varchar(30) NOT NULL default '', # PRIMARY KEY (`domainsid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # -------------------------------------------------------- # # Table structure for table `qpsmtpdcodes` # #CREATE TABLE `qpsmtpdcodes` ( # `qpsmtpdcodesid` int(11) NOT NULL auto_increment, # `dateid` int(11) NOT NULL default '0', # `reason` varchar(40) NOT NULL default '', # `count` bigint(20) NOT NULL default '0', # `servername` varchar(30) NOT NULL default '', # PRIMARY KEY (`qpsmtpdcodesid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # -------------------------------------------------------- # # Table structure for table `time` # #CREATE TABLE `time` ( # `timeid` int(11) NOT NULL auto_increment, # `time` time NOT NULL default '00:00:00', # PRIMARY KEY (`timeid`) #) ENGINE=MyISAM DEFAULT CHARSET=latin1; # #############################################################################
Additional Notes
Handling @*.u Logfiles
Multilog occasionally generates log files that end in ".u" instead of ".s". The multilog manual says this:
- .s: This file is completely processed and safely written to disk.
- .u: This file was being created at the moment of an outage. It may have been truncated. It has not been processed.
The latest version of mailstats.cron will process "@*" and "current", so will catch all log files. Earlier versions only processed "*.s" and "current".
However in the early days of an installation, there will be only the "current" file, this leads to a nightly error message:
Can't open /var/log/qpsmtpd/*.s: No such file or directory
This is only a minor issue as it 'solves' itself once logrotate creates the .u or .s files.