MythTV-ivtv

From SME Server
Revision as of 09:18, 2 January 2008 by RequestedDeletion (talk | contribs) (New page: Example output of 'dmesg' after loading ivtv ('modprobe ivtv') with a PVR-350 card. Linux video capture interface: v1.00 ivtv: no version for "struct_module" found: kernel tainted. ivt...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Example output of 'dmesg' after loading ivtv ('modprobe ivtv') with a PVR-350 card.

Linux video capture interface: v1.00
ivtv: no version for "struct_module" found: kernel tainted.
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.10 (tagged release) loading
ivtv:  Linux version: 2.6.9-67.0.1.EL 686 REGPARM 4KSTACKS gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
PCI: Found IRQ 10 for device 0000:00:0e.0
PCI: Sharing IRQ 10 with 0000:00:12.0
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2868406
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = MSP4418 (type = 19)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: ivtv driver
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
saa7127 0-0044: ivtv driver
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
msp3400 0-0040: ivtv driver
msp3400 0-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio mode=simpler
msp3400 0-0040: msp34xxg daemon started
ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40]
tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 350, card #0
ivtv:  ====================  END INIT IVTV  ====================