Talk:Raid

From SME Server
Revision as of 05:44, 27 October 2007 by Snoble (talk | contribs) (enabling smartd)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

We could add a section on enabling smartd to monitor disk health
see http://bugs.contribs.org/show_bug.cgi?id=1445
http://www.linuxmanpages.com/man8/smartd.8.php

Monitor Disk Health

Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.

Enable

config set smartd service 
config setprop smartd status enabled
ln -s /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S40smartd


This will log warnings to /var/log/messages, Emails to admin on critical errors would be good.