Description

eGroupWare is a free enterprise ready groupware software for your network. It enables you to manage contacts, appointments, todos and many more for your whole business.

eGroupWare is a groupware server. It comes with a native web-interface which provides the ability to access your data from any platform with a web browser, both inside and outside the local network. Moreover you also have the choice to access the eGroupWare server with your favorite groupware client (Kontact, Evolution, Outlook) and also with your mobile or PDA via SyncML.

eGroupWare is international. At this time, it supports more than 25 languages including rtl support.

For more information see http://www.egroupware.org/.

With this RPM you can use eGroupWare on your SME 7.x (and above). You can install it as one single package in a very comfortable way.

eGroupWare 1.8.005 for SME 8.0 and above (only for testing purpose)

Maintainers

Jean-Philippe Pialasse

Installation

	Warning:
	for test purpose only for the moment as the smeserver-egroupware package is still in test

For installation run the following commands:

db yum_repositories set server_eGroupWare repository \
BaseURL http://download.opensuse.org/repositories/server:/eGroupWare/CentOS_5/ \
EnableGroups no GPGCheck yes \ Name "eGroupware (CentOS_5)" \
GPGKey http://download.opensuse.org/repositories/server:/eGroupWare/CentOS_5/repodata/repomd.xml.key \
Visible yes status disabled

then

signal-event yum-modify

yum install smeserver-egroupware --enablerepo=smetest,smedev,server_eGroupWare,smecontribs

	Note:
	see ~~bugzilla:8040~~ To see status of advancement of testing for SME Server V8

Update/Upgrade

Please note that this RPM cannot upgrade eGroupWare 1.2.x

Warning:

Because of a bug in old RPM versions*, YOU MUST UNINSTALL THE OLD RPM BEFORE UPDATING WITH THE FOLLOWING COMMAND:

rpm -e smeserver-egroupware --noscripts

This will prevent installation files and MySQL to be deleted.

Please note that this RPM cannot fully upgrade eGroupWare 1.4.x and 1.6.x : some manual steps are necessary

first

	Warning:
	for test purpose only for the moment as the smeserver-egroupware package is still in test

For installation run the following commands:

db yum_repositories set server_eGroupWare repository \
BaseURL http://download.opensuse.org/repositories/server:/eGroupWare/CentOS_5/ \
EnableGroups no GPGCheck yes \ Name "eGroupware (CentOS_5)" \
GPGKey http://download.opensuse.org/repositories/server:/eGroupWare/CentOS_5/repodata/repomd.xml.key \

Visible yes status disabled then

signal-event yum-modify

yum install smeserver-egroupware --enablerepo=smetest,smedev,server_eGroupWare,smecontribs

Then you will have to :

copy your main config file, and gallery2, phpsysinfo from opt/egroupware to /usr/share/egroupware
edit these file to reflect new paths
manually migrate personal data ( i.e. :File Manager files) from /opt/egroupware to /usr/share/egroupware and /var/lib/egroupware/default
database will remain the same and will be updated
gallery user might have to move their g2data

Finally, you must finish the upgrade at the Config-Admin Setup with your existing credentials. Then click on upgrade...

Then re-check your install

If all went ok, upgrade is done!

A backup is done by the RPM before updating. All Files and MySQL DataBase are saved in /opt/eGW_RPM_BACKUP You must move the backup to a safe directory.

This automatic step is just for safety, make your own backup before updating/upgrading.

Uninstallation

	Warning:
	for test purpose only for the moment as the smeserver-egroupware package is still in test : this script is not yet fully functional, path to eGroupware needs to be updated (1.8.005-3)

To uninstall use the following command:

yum remove smeserver-egroupware eGroupware

If you want to completely remove eGroupWare from your server, you need the following command:

sh /root/eGW-Full-Uninstall.sh

This will delete eGroupWare's installation files, MySQL database and SME database entries.

Configuration

see Starting with eGroupWare

eGroupWare 1.4.004 for SME 7.x

Maintainers

Dietmar Berteld
mailto:dietmar@berteld.com

Sylvain Gomez
mailto:sylvaingomez@free.fr

Stéphane Gauvin
mailto:sgauvin@serviceinfosg.com

Andrea Sacchetti
mailto:studiosacchetti@gmail.com

Installation

For installation run the following commands:

wget http://mirror.contribs.org/contribs/sgomez/contribs/egroupware/smeserver-egroupware-1.4.004-1.noarch.rpm
yum localinstall smeserver-egroupware-1.4.004-1.noarch.rpm

The rpm is about 26Mbytes in size, so may take some minutes to download.

	Note:
	see ~~bugzilla:7640~~ you have to set the upload_tmp_dir in the php.ini as described here For SME Server V8

Update/Upgrade

Please note that this RPM cannot upgrade eGroupWare 1.2.x

Warning:

Because of a bug in old RPM versions*, YOU MUST UNINSTALL THE OLD RPM BEFORE UPDATING WITH THE FOLLOWING COMMAND:

rpm -e smeserver-egroupware --noscripts

This will prevent installation files and MySQL to be deleted.

* Affected versions are smeserver-egroupware-1.4-10 and older

Then, you can update your existing 1.4 installation with

rpm -Uvh smeserver-egroupware-1.4.004-1.noarch.rpm

If you were upgrading eGroupWare version (i.e.1.4.001 to 1.4.002) you must finish the upgrade at the Config-Admin Setup with your existing credentials. Then click on upgrade...

Then re-check your install

If all went ok, upgrade is done!

A backup is done by the RPM before updating. All Files and MySQL DataBase are saved in /opt/eGW_RPM_BACKUP You must move the backup to a safe directory.

This automatic step is just for safety, make your own backup before updating/upgrading.

Uninstallation

To uninstall use the following command:

yum remove smeserver-egroupware

In the new release (1.4.002-x), if you want to completely remove eGroupWare from your server, you need the following command:

sh /root/eGW-Full-Uninstall.sh

This will delete eGroupWare's installation files, MySQL database and SME database entries.

Starting with eGroupWare

Please perform the Intial Configuration FIRST before login to eGroupWare. After that SME users can login to eGroupWare with their used SME account + password. At first login, eGroupWare creates user accounts and passwords automatically and synchronize them to the SME Server.

Inital Configuration

You can find eGroupWare in the /opt/egroupware directory. For using eGroupWare start your browser with the URL http://servername/egroupware/setup and logon with the user config-admin + password admin at Setup/Config Admin Login.

Now you should create eGroupWare's admin-account. Because eGroupWare uses mail authentication, the admin-account must be a valid SME account/password. This account will be able to use and administer eGroupWare.

Logout after creating the admin account.

Changing passwords for eGW config-admin / header-admin

Go to your browser and logon with the user header-admin + password admin at Header Admin Login.

Change the passwords for the users config-admin and header-adminnow:

Store the new passwords with "Write".

	Warning:
	For security-reasons, change the passwords for the users config-admin and header-admin after your first login !

Adjusting accessibility

The default behaviour of eGroupWare is: accessible from LAN + Internet with "forced https" (with SSL on and a rewrite rule to force a redirection to the SSL page) You can easily change those defaults settings with following commands:

# config setprop egroupware HTTPS on
# config setprop egroupware HTTPS off

# config setprop egroupware PublicAccess global
# config setprop egroupware PublicAccess local

Once done, apply modifications and restart Apache:

# expand-template /etc/httpd/conf/httpd.conf
# service httpd-e-smith restart

Synchronization

eGroupWare provides Synchronization of calender, todo's, notes and addressbook with offline-clients like MS Outlook and PDA's. Unfortunally there is a requirement for PHP5 to accomplish these functions, which is not implemented in SME 7. But actually it is possible to sync to MS Outlook with the xmlrpc protocol and the eGWOSync application.

MS Outlook Synchronization

You can sync eGroupWare-Data to MS Outlook as follows:

1. Install certificate with MS Internet Explorer

Start Internet Explorer
Enter URL = https://servername
Enter "show certificate"
Enter "install certificate" and go on to install your SME certificate

	Note:
	Under Vista, you have to put your domain in the approved website list before being able to install the certificate.

2. MS Outlook

Close your MS Outlook if active.
Go to system control, register mail.
show profiles... -> delete all profiles
Start MS Outlook, create a new profile with your mail account

3. eGWOSync

Download eGWOSync and .NET, if necessary. If your .NET release is newer than version 1.x, you must install both versions on your system.

You need .NET Version 1.x, eGWOSync accepts no newer versions
User/Password = SME user account/password
Domain = default
Hostname = SME domain
Port = 443
Use SSL = enabled
URL = keep default values
Perform test

4. Funambol

Download Web site: Funambol Web Site Download Funambol 6.5.7 link [1]

1) Install the last Funambol Plugin
2) Change "7" to "0" for mbstring.func_overload = 0 in php.ini 
3) Open Outlook go to the Funambol Setup (Funambol --> Option)
4) Select all items
5) lower the log level in /opt/egroupware/phpgwapi/inc/horde/config/conf.php (change $conf['log']['priority'] = PEAR_LOG_DEBUG to $conf['log']['priority'] = PEAR_LOG_INFO)
6) Setup options:

ACCOUNT

Location = http://Domain Name/egroupware/rpc.php or http://Server IP/egroupware/rpc.php
Username = Your user login name for eGroupWare
Password = Your user password for eGroupWare

SYNC

CONTACTS
Sync Direction = Two-Way
Remote name = ./sifcontacts
Data Format = SIF
CALENDAR
Sync Direction = Two-Way
Remote name = ./sifcalendar
Data Format = SIF
TASKS
Sync Direction = Two-Way
Remote name = ./siftasks
Data Format = SIF
NOTES
Sync Direction = Two-Way
Remote name = ./sifnotes
Data Format = SIF

NOTES:

To get success with synchronisation put thoses settings in .htaccess file in the root folder of egroupware (/opt/egroupware/html/.htaccess):

Run this on PuTTY (NOTE: this does not appear to work SME7.3, leaving the i-bay with an AllowOverride setting of 'none'):

db accounts setprop egroupware AllowOverride All
signal-event ibay-modify egroupware

.htaccess file settings:

AddType text/xml .xml
php_value memory_limit 32M
php_value max_execution_time 60
php_flag register_globals Off
php_flag magic_quotes_gpc Off
php_flag magic_quotes_runtime Off
php_value upload_max_filesize 16M
php_flag session.use_trans_sid Off
php_value session.gc_probability 1
php_value session.gc_divisor 10
php_value mbstring.func_overload 7
<Files rpc.php>
php_value mbstring.func_overload 0
Order allow,deny
Allow from all
</Files>

--- --Stéphane Gauvin -- Service Informatique SG 09:29, 1 March 2008 (MST) --Snoopyski 19:04, 20 September 2007 (MDT)

syncml configuration

	Warning:
	this part is outdated, and should not used, as php5-cgi has multiple security issues and is deprecated. You need to migrate to SME8 with PHP5

From http://forums.contribs.org/index.php?topic=40242.new;topicseen#new

Here are the steps to configure syncml with egroupware:

1. Install php5-cgi as explained in this howto http://sme.firewall-services.com/spip.php?article46

(Stop after Step 3, Step 4 is just an example)

2. Create a custom-template so that rpc.php is handled by php5:

vim /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/90egw-syncml

and enter the following:

<Location /egroupware/rpc.php>
      AddHandler php5-cgi .php
      Action php5-cgi /php5-cgi/php
</Location>

3. Edit /etc/php5/php.ini (this file has no templates so you can edit it directly)

On Line 304

memory_limit = 8M

change it to a bigger value, for example

memory_limit = 32M

On Line 1191 uncomment the line:

mbstring.func_overload = 0

(This may not be useful as php5-cgi has been compiled without mbstring support).

There is no need for a htaccess file (htaccess could configure php4 because it's an apache module but not php5-cgi).

expand-template /etc/httpd/conf/httpd.conf 
sv t /service/httpd-e-smith
sv s /service/httpd-e-smith

To check syntax is OK do:

httpd -t

syncml has been tested with the Funambol plugin for Outlook (several versions) & works OK.

Gallery2 addon

Gallery2 is the first addon available for eGroupWare 1.4.002

It has been integrated in smeserver-egroupware-1.4.002-3.noarch.rpm (but not installed by default)

Description

Gallery is an open source web based photo album organizer. Gallery gives you an intuitive way to blend photo management seamlessly into your own website whether you're running a small personal site or a large community site.

For more information see http://gallery.menalto.com/.

Gallery2 install

First, login at Config setup with your existing creditentials and clic on Manage Applications.

Then simply click on Gallery install checkbox and save your changes.

Gallery2 setup

Once Installed, you need to configure your website and create the database. This step has been prepared by the RPM install.

Open your web browser at https://yourdomain.com/egroupware/gallery/gallery2/install and follow instructions.

In the 4th step, you will be asked for a storage folder. RPM install has prepared /opt/egroupware/files/g2data, please don't change neither path nor permissions!

For SME8 and eGroupware 1.8.005, Defualt Path will be /var/share/default/files/g2data, please don't change neither path nor permissions!

In the 5th step, you will be asked for MySQL informations. RPM install has prepared egwuser egroupware and your DbPassword automatically. Just save and finish the install.

Gallery2 icon

Once the setup is done you can add the icon in eGroupWare's interface. Login to eGroupWare with an admin account, and edit a user or a group and add gallery

	Note:
	The gallery can also be accessed with no authentication at https://yourdomain.com/egroupware/gallery/gallery2

SME 8 egroupware 1.6.003

Packages for SME 8 are available, courtesy of Studio Sacchetti, with no support on bugzilla as sources are not available:

http://sites.google.com/site/studiosacchetti/home/downloads/smeserver-egroupware-1.6.003-2.noarch.rpm

Egroupware

Contents

Description

eGroupWare 1.8.005 for SME 8.0 and above (only for testing purpose)

Maintainers

Installation

Update/Upgrade

Uninstallation

Configuration

eGroupWare 1.4.004 for SME 7.x

Maintainers

Installation

Update/Upgrade

Uninstallation

Starting with eGroupWare

Inital Configuration

Changing passwords for eGW config-admin / header-admin

Adjusting accessibility

Synchronization

MS Outlook Synchronization

syncml configuration

Gallery2 addon

Description

Gallery2 install

Gallery2 setup

Gallery2 icon

SME 8 egroupware 1.6.003

Additional information

Navigation menu

Search