OwnCloud

	Skill level: Medium
	The instructions on this page require a basic knowledge of linux.

About

"ownCloud ( http://owncloud.org ) gives you universal access to your files through a web interface or WebDAV. It also provides a platform to easily view & sync your contacts, calendars and bookmarks across all your devices and enables basic editing right on the web. Installation has minimal server requirements, doesn’t need special permissions and is quick. ownCloud is extendable via a simple but powerful API for applications and plugins." Version 5.0.0. and later works out of the box on SME8.

Warning

Warning:

Actual versions of owncloud show an security-related warning on SME 8.x like:

Your PHP version is vulnerable to the NULL Byte attack (CVE-2006-7243) Please update your PHP installation to use ownCloud securely.

This is because SME8.x ships with PHP version 5.3.3 where Owncloud 5.x checks for PHP version 5.3.4

You should take this very serious as long as this warning appears, because the installation of owncloud on your server could cause a servere risk. Perhaps it is safer for you to wait until the reason for this warning is solved. The solution proposed as you can see below is to upgrade your php version with the webtatic repository

see ~~bugzilla:7613~~ and most particularly bugzilla:7613#c3 and this one for a workaround. An alternative method is mentioned in the forums here.

webtatic-el5

first we need to install the webtatic repository, see the relevant wiki page

/sbin/e-smith/db yum_repositories set webtatic repository \
Name 'webtatic - EL5' \
MirrorList 'http://mirror.webtatic.com/yum/centos/5/$basearch/mirrorlist' \
EnableGroups no \
GPGCheck yes \
GPGKey http://repo.webtatic.com/yum/RPM-GPG-KEY-webtatic-andy \
Visible no \
status disabled

After adding it to the database updating the configuration file is required:

signal-event yum-modify

check your php version

[root@sme8dev-3 ~]# rpm -q php
php-5.3.3-13.el5.sme.2

upgrade your php version

[root@sme8dev-3 ~]# yum update --enablerepo=webtatic php

verify your php version

[root@sme8dev-3 ~]# rpm -q php
php-5.3.27-2.w5

and reconfigure your server

signal-event post-upgrade; signal-event reboot

After that you can continue the HowTo

Forum discussion

This how-to can be discussed on the forums here (locked) or here or here. Search for other posts.

Quick install

Download the latest version from here http://download.owncloud.org/community/owncloud-5.0.13.tar.bz2

Create an ibay in server manager, with the following typical settings:

Information bay name - owncloud, Description - owncloud site, Group - Admin, User access - Write = group, Read = everyone, 
Public access via web - Entire Internet (no password required), Execution of dynamic content - Enabled

Extract ownCloud into the html directory of the new ibay (in this example called 'owncloud' )

In the following code, change the version number of owncloud to suit the current version downloaded from the owncloud website

cd /home/e-smith/files/ibays/owncloud/html/
wget http://download.owncloud.org/community/owncloud-5.0.13.tar.bz2
tar xvf owncloud-5.0.13.tar.bz2 
mv owncloud/* .
mv owncloud/.htaccess .
rm  index.html

Set appropriate ibay settings at the command line prompt:

db accounts setprop owncloud \
AllowOverride All \
FollowSymLinks enabled \
Group www \
PHPBaseDir /home/e-smith/files/ibays/owncloud/:/tmp/ \
PublicAccess global \
UserAccess wr-group-rd-everyone

Update the ibay

signal-event ibay-modify owncloud

you also need to allow the "allow_url_fopen"

 mkdir -p /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf
 nano -w /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/99allow_url_fopen

and paste the following and save this

 <Directory /home/e-smith/files/ibays/owncloud/html>
 php_admin_flag allow_url_fopen on
 </Directory>

then at the command line prompt enter:

 expand-template /etc/httpd/conf/httpd.conf
 /etc/init.d/httpd-e-smith restart

4. Create a new MySQL database (In this example the database name is databasename. Change databasename, username and password with your own choices as required)

mysql
create database databasename;
grant all privileges on databasename.* to username identified by 'password';
flush privileges;
exit

5. Browse to http://yourserver/owncloud and follow install script

Optional

Force Https

You can force https by checking 'Enforce HTTPS' in the Security section of the Admin section.

You can also force the https redirection whenever you use the http protocol:

see Https_redirection

User login and permissions

owncloud provides several ways for users to login/authenticate. Next to the internal user authentication of owncloud, you can authenticate SME users:

LDAP Authentication

Configure owncloud to authenticate against the internal SME OpenLDAP server (all SME users)

log into your owncloud webapp as admin who installed owncloud
go to apps and enable ldap authentication backend
go to admin, ldap section and use below settings

Host: localhost
Base DN: dc=[yourdomain],dc=[com] (as seen in the 'domains' section in SME server manager)
User DN: uid=admin,ou=Users,dc=[yourdomain],dc=[com]
Password: [SME admin password]
User Login Filter: uid=%uid
User List Filter: objectClass=person

For the variables between brackets [], use your specific settings. Test creating a specific user and use that username password opposed to using the admin's credentials. For more info on using SME OpenLDAP for authentication please see: http://wiki.contribs.org/LDAP_Authentication

LDAP Tweaks

It seems when creating a user in SME, and ownCloud integrated via LDAP, it takes a while before the new user can log into ownCloud. Also, the error "Can't get cache storage, user not logged in" begins to log in the ownCloud Warning Log. To fix this, and allow the new user to log in immediately, go to Settings -> Admin -> LDAP/Advanced Tab Change the Cache Time To Live + or -1. This forces the cache to update, and the new user will be able to log in to ownCloud straight away.

	Note:
	When setting up ldap following these instructions you may need to uncheck "tls" in the advanced tab of the ldap admin section in owncloud.

IMAP Authentication

Configure owncloud to authenticate against an IMAP server

Enable and Configure IMAP Authentication

Login to your running owncloud configuration as an administrator
Enable the app named "External user support"
Note: "External user support" is included with owncloud as an "Internal app". There is an older add-on app named "IMAP user backend" that did not work for me.
Edit <owncloud>/config/config.php and insert the text below inside the $CONFIG array
- in front of the last closing parenthesis in the file (make sure there's a comma at the end of the preceding entry)
- Replace [mail.yourdomain.com] with your mail server name or IP address
- Remove "/novalidate-cert" if your chosen mail server uses a signed SSL certificate):

  'user_backends' => 
  array (
    0 => 
    array (
      'class' => 'OC_User_IMAP',
      'arguments' => 
      array (
        0 => '{[mail.yourdomain.com]:993/imap/ssl/novalidate-cert}',
      ),
    ),
  ),

When done, users will be able to login to your owncloud web interface using their mail server username and password. More information can be found here: http://owncloud.org/support/custom-user-configuration/

Problems

Users who login using IMAP Authentication are not automatically added to the owncloud "oc_users" table. Consequently, they are not offered as options when other users want to share files with them.
IMAP authenticated users will be unable to connect using the owncloud client sync program.
If your IMAP server allows alternative username syntax, owncloud will create a separate account for each username format that allows successful authentication. That is, if your IMAP server allows users to optionally include or omit the domain name, you might create a user account entry for "xyzuser@mail.yourdomain.com", then find that the user always logs in using simply "xyzuser", which succeeds during the IMAP authentication, but is a different account within owncloud.

Sync Issues (Turning off magic quotes in php)

I had issues when deleting files in my client. Turing off magic quotes fixed the problem. Edit your php.ini using custom templates.

See http://wiki.contribs.org/PHP

cd /etc/e-smith/templates-custom/etc/php.ini

Edit template-begin file
Add the following and save file:

php_value magic_quotes_gpc = Off
php_value magic_quotes_runtime = Off
php_value magic_quotes_sybase = Off

expand-template /etc/php.ini
sv t httpd-e-smith

Allow Sharing with IMAP Users

To allow sharing with your IMAP users, you need to manually add each IMAP user account to the oc_users table using commands like those below at a shell prompt on your SME server:

mysql owncloud
insert into oc_users (uid,password) values ('[xyzuser@mail.yourdomain.com]','*');

owncloud: replace with the name of the database you created for owncloud
[xyzuser@mail.yourdomain.com]: replace with the exact login string used by the user when they login

Using the Owncloud Client

In order for an IMAP-authenticated user to configure the owncloud client sync program:

The system administrator must add the username to the oc_users table manually as described above

Then the user must:

login to the web interface
open his/her personal settings
"change" the password in owncloud to match the password on the IMAP server.

References

User-Guide for Installing OwnCloud on SME 8.0

Interesting relations to other Contribs or How-to's

ownCloud Attachments integration for Zarafa

Contents