Ddclient
ddclient - DNS record updating
Use this contrib when you have a sme server connected to a ISP service using a dynamic IP, and you wish to host multiple domains.
ddclient is a client for updating dynamic DNS entries for domains hosted at different DNS providers.
Configure your dynamic host domains via the ddclient server manager panel.
ddclient can be used on servers configured in server gateway mode or in server only mode.
SME contribs repo version
Installation
yum install --enablerepo=smecontribs smeserver-ddclient
There is no need to run the signal-event post-upgrade and reboot commands.
A new panel will be added to the server manager.
Use this panel to configure domain records you wish to keep updated with your dynamic IP using the ddclient contrib
Removal
yum remove smeserver-ddclient
smeserver.free.fr version
Note: RPM at smeserver.free.fr works with SME 8
This page provides a link to an externally hosted ddclient contrib for sme7.x
This contribs has some additional features like the ability to select the method on how the detect the external IP address and the ability to publish arbitrary domain names (i.e. not just the ones that are on your server).
Installation
Download the latest rpm version from
http://www.files.com/shared/4f89e32b9c187/sme7-ddclient-3.7.3-7.noarch.zip
to an empty folder eg /tmp and unzip the file
unzip sme7-ddclient*
The currently available rpm is:
sme7-ddclient-3.7.3-7.noarch.rpm
Then cd to that folder and install the rpm (change the rpm name in the following command to match the latest available version)
cd /tmp yum localinstall sme7-ddclient*.rpm
Removal
yum remove sme7-ddclient signal-event post-upgrade;signal-event reboot