FreePBX

FreePBX is a full-featured PBX web application. If you’ve looked into Asterisk, you know that it doesn’t come with any "built in" programming. You can’t plug a phone into it and make it work without editing configuration files, writing dialplans, and various messing about.

FreePBX simplifies this by giving you pre-programmed functionality accessible by a user-friendly web interfaces that allows you to have a fully functional PBX pretty much straight away with no programming required. Some of the features that FreePBX supports out of the box are:

Unlimited number of Voicemail boxes
"Follow Me" functionality
Ring Groups with calls confirmation (so if, eg, a cellphone is out of range and diverts to voicemail, all the other phones keep ringing)
Unlimited number of Conferences (limited by available CPU power - about 300 simultaneous users in conferences on a P4 3ghz - 600 with a dual core!)
Paging and Intercom functionality for man SIP phones that support it.
Music on Hold (via MP3s, or streamed off the internet)
Call Queues
And many other features

Requirements

SME Server 7.X
You may also want some hardware cards if you don't want your installation to be IP only. I've tested successfully the TDP400P, TDM410P and b410P (misdn) from Digium, but any card supported by DAHDI (should be anything working with zaptel) should work.

Installation

	Warning:
	FreePBX will manage all asterisk configuration. If you have already configured asterisk by hands, you should backup everything. Of course, you'll latter be able to customize some parts of the diaplan, but in special files. Also, FreePBX is NOT compatible with SAIL (it's an alternative)

Install the rpms

yum --enablerepo=smecontribs install smeserver-freepbx

You may also want to install dahdi drivers (it's the new name for zaptel) if you have an hardware card supported

yum --enablerepo=smecontribs install dahdi-tools dahdi-linux dahdi-linux-kmdl-$(uname -r)

Finish the installation

To finish the installation, you should issue the command

signal-event freepbx-update

The first time this event runs, it'll install FreePBX. You'll installation's log in /root/freepbx_install.log

You should now be able to start using FreePBX on https://server.domain.tld/freepbx/admin

Components

FreePBX is composed of 4 main parts: the main FreePBX interface, Recordings, Asterisk-Stats and Flash Operator Panel

This is the main web interface for asterisk configuration. This interface is available at https://server.domain.tld/freepbx/admin, or in the server-manager, under FreePBX menu. You'll need to login as admin (password of your admin's SME account) to access this part. You can grant the access to any user of the system using the userpanel contrib (just grant the user or the group the permission to access freepbx panel)

Recordings

Recordings, is a web based portal for users. You may configure some features of your phone here (followme, call forward, call waiting etc...), check you call history, or download/listen to your voicemail. This interface is available at https://server.domain.tld/recordings. The login here is your phone (extension) number and your voicemail password. There's also a special admin account. The admin account can access all call logs and recordings. The login is admin, the password is randomly generated, you can find it in /opt/freepbx/recordings/includes/main.conf.php

Asterisk Stats

Asterisk-Stats is an interface to query CDR (Call Detail Reports) database. It's available on the main FreePBX interface at https://server/domain.tls/freepbx, on the "Reports" tab

Flash Operator Panel

Flash Operator Panel is a switchboard type application for the Asterisk PBX. It runs on a web browser with the flash plugin. It is able to display information about your PBX activity in real time. The layout is configurable (button sizes and colors, icons, etc). The FOP is available at https://server.domain.tld/panel or in the main interface in the "Panel" tab.

You can grant the access to any user of the system using the userpanel contrib (just grant the user or the group the permission to access fop panel)

DB parameters

Here's the list of DB parameters:

CdrDbName: the name of the database for CDR. The default is asteriskcdrdb. You should let this unless you know what you're doing
CdrDbPassword: the password to access the CDR database. A random value is generated at install time.
DbName: the name of the database for FreePBX. The default is freepbxdb. You should let this unless you know what you're doing
DbPassword: the password to access FreePBX database. A random value is generated at install time.
DbUser: the username to access both databases. Default is freepbxuser
DeviceAndUser: (enabled|disabled) You can enable the 'deviceanduser' display view of FreePBX. DeviceAndUser is enabled, Devices and Users will be administered seperately, and Users will be able to "login" to (adhoc) devices. If disabled Devices and Users will me administered in a single screen.
Fop: (enabled|disable) FOP requires a small daemon to be started. You can disable it if you don't want to use FOP.
FopPassword: This is the additional password for FOP. There's a first password needed to access FOP (by default, only admin is allowed). This first password is your SME account password. The second password (the onde on this db parameter) allow users to use drag/drop on the differents items (transfert call, initite a call, hangup etc...). The default password is a random generated one at install time.
ManagerPassword: This is the asterisk manager password used by freepbx (the login is 'admin'). The default one is randomly generated at install time.
UDPPorts: Lists of ports used by asterisk. This settings is only usefull if you want to open asterisk on the public interface (you can also restrict it with AllowHost parameter)
access: (private|public). if you want to open asterisk on the public interface, you can set this to public.
status: (enabled|disabled). Should asterisk (with FreePBX provided helper script) should be started automatically.

Uninstall

yum remove smeserver-freepbx freepbx-src

If you want to cleanup everything (MySQL databases, DB, etc...), you can use this script:

#!/bin/bash

clear
echo "----------------------------"
echo "!!!!!     WARNING     !!!!!"
echo "----------------------------"
echo ""
echo "This script will remove from your server:"
echo "     - freepbx and asterisk cdr MySQL databases"
echo "     - freepbx MySQL User"
echo "     - freepbx DB entries (freepbx, httpd-fpbx and dahdi)"
echo "     - /opt/freepbx"
echo ""
echo -n "Are you sure you want to remove FreePBX permanently ? (y/n) [n] "
read confirm
if [ "$confirm" = "y" -o "$confirm" = "Y" ]; then
       echo "Droping MySQL databases..."
       DBNAME=$(/sbin/e-smith/db configuration getprop freepbx DbName)
       CDRDBNAME=$(/sbin/e-smith/db configuration getprop freepbx CdrDbName)
       mysql -e "DROP DATABASE $DBNAME"
       mysql -e "DROP DATABASE $CDRDBNAME"
       echo "Deleting MySQL User..."
       DBUSER=$(/sbin/e-smith/db configuration getprop freepbx DbUser)
       mysql -u root -e "REVOKE ALL PRIVILEGES ON *.* FROM '$DBUSER'@'localhost';"
       mysql -u root -e "DROP USER '$DBUSER'@'localhost';" > /dev/null 2>&1
       echo "Removing SME DB entries..."
       /sbin/e-smith/db configuration delete freepbx
       /sbin/e-smith/db configuration delete httpd-fpbx
       /sbin/e-smith/db configuration delete dahdi
       echo "Removing /opt/freepbx ..."
       rm -rf /opt/freepbx
       echo "Done!"
fi

Bugs

Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-freepbx component or use this link

FreePBX

Contents

Maintainer

Version

Description

Requirements

Installation

Components

FreePBX

Recordings

Asterisk Stats

Flash Operator Panel

DB parameters

Uninstall

Bugs

Navigation menu

Search