Denyhosts
Denyhosts SSH
Maintainer
Unnilennium aka Jean-Philippe PIALASSE (Contrib)
Description
- Denyhosts bans hosts which failed too many login attempts to your ssh deamon.
- It contains also a panel in the server manager to see who is blocked, add some allowed hosts not to block and enable or disable the service.
it needs the packages smeserver-denyhosts and denyhosts
Installation
- Log in (with username root) to the SMEserver console.
- Install smeserver-denyhosts
/usr/bin/yum install smeserver-denyhosts --enablerepo=smecontribs
You will get a y/N-question, answer y if it looks fine. There is no need to reboot the server. - Open your webbrowser and go to the server-manager.
Under "Security" there should be a new line named "SSH Denyhosts". You should go to it and configure all necessary allowed hosts before enabling the service. When done set status to 'enabled'.
Alternatively you can use the server-manager panel "Software installer" to add a new package and select smeserver-denyhosts (repo smecontribs must be enabled) then do the reconfiguration and reboot task, instead of steps 1 and 2, then refresh your browser and configure denyhosts,.
Editing configuration
Q) How can the denyhost configuration be customized?
A) You must copy the templates to the templates-custom directory and modify the appropriate fragments.
mkdir -p /etc/e-smith/templates-custom/etc/denyhosts.conf cd /etc/e-smith/templates-custom/etc/denyhosts.conf/ cp ../../../templates/etc/denyhosts.conf/* .
Now edit the appropriate files. See the Denyhosts FAQ for details. When done make your changes effective:
signal-event conf-denyhosts
Q) How is an ip-address removed from the blocked list?
A) Edit the configuration file and and restart the service.
pico -w /etc/hosts.deny_ssh
Make required changes, then save & exit
ctrl + c
ctrl + x
/etc/init.d/denyhosts restart
precaution
when you edit the /etc/hosts.deny_ssh
you should delete both the IP and comment line otherwise it will not work
for example you want to let 192.168.3.3 to have access and you find this
# DenyHosts: Thu Feb 14 19:03:30 2013 | 192.168.1.1 192.168.1.1 # DenyHosts: Thu Feb 14 22:36:00 2013 | 192.168.2.2 192.168.2.2 # DenyHosts: Fri Feb 15 08:44:09 2013 | 192.168.3.3 192.168.3.3 # DenyHosts: Fri Feb 15 10:44:39 2013 | 192.168.n.n 192.168.n.n
if you delete only the IP (not the comment also) the block ban will not be raised for IP 192.168.3.3 after the restart of the service
# DenyHosts: Thu Feb 14 19:03:30 2013 | 192.168.1.1 192.168.1.1 # DenyHosts: Thu Feb 14 22:36:00 2013 | 192.168.2.2 192.168.2.2 # DenyHosts: Fri Feb 15 08:44:09 2013 | 192.168.3.3 # DenyHosts: Fri Feb 15 10:44:39 2013 | 192.168.n.n 192.168.n.n
or if you change to another IP it seems to don't work
# DenyHosts: Thu Feb 14 19:03:30 2013 | 192.168.1.1 192.168.1.1 # DenyHosts: Thu Feb 14 22:36:00 2013 | 192.168.2.2 192.168.2.2 # DenyHosts: Fri Feb 15 08:44:09 2013 | 192.168.3.3 192.168.a.a # DenyHosts: Fri Feb 15 10:44:39 2013 | 192.168.n.n 192.168.n.n
you should delete both lines (IP + comment)
# DenyHosts: Thu Feb 14 19:03:30 2013 | 192.168.1.1 192.168.1.1 # DenyHosts: Thu Feb 14 22:36:00 2013 | 192.168.2.2 192.168.2.2 # DenyHosts: Fri Feb 15 10:44:39 2013 | 192.168.n.n 192.168.n.n
and then restart the service
/etc/init.d/denyhosts restart
Uninstall
yum remove smeserver-denyhosts denyhosts
or alternatively just remove them from the server-manager "Software installer"
Additional information
you can change the destination email account, instead of the default admin account, for this contribs using :
config setprop denyhosts AdminEmail youremail@yourdomaine.tld signal-event conf-denyhosts
Check installed version
yum info installed smeserver-denyhosts
Bugs
Please raise bugs under the SME Contribs section in bugzilla .
| ID | Product | Version | Status | Summary (2 tasks) ⇒ |
|---|---|---|---|---|
| 12582 | SME Contribs | 10.0 | UNCONFIRMED | Denyhosts ValidFrom from Configurations DB not used |
| 10430 | SME Contribs | 9.3 | UNCONFIRMED | SSH Denyhosts Web panel does not support entry of range of "Authorized IP" |
Changelog
Only released version in smecontrib are listed here.
- apply locale 2024-09-04.patch
- add Provides perl(esmith::FormMagick::Panel::denyhosts)
- Re-build and link to latest devtools [SME: 11997]
- add to core backup [SME: 12003]
