Talk:SANE

use templates not templates-custom

create a smeserver-sane with the templates

see http://wiki.contribs.org/HylaFax for an alternative to a full reconfig/reboot, you just need to work out what needs to change

Yes, I looked...

create a smeserver-sane with the templates: I don't have a lot of time at present

If I have a little of time...

I must finish the installation of mgetty / vgetty for SME before

good work so far, I'm dusting off my old scanner...

What Manufacturer and Model?

sane-find-scanner

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0305 [Hewlett-Packard ScanJet 4300C]) at libusb:002:003

and lsusb > Bus 002 Device 003: ID 03f0:0305 Hewlett-Packard ScanJet 4300c

but scanimage -L > No scanners were identified.

documentation suggest this may not be a problem if i can supply my device name

could you suggest what the syntax might be ?

http://www.sane-project.org/sane-mfgs.html#Z-HEWLETT-PACKARD > niash driver

View sane documentation: service = sane-port => grrrrrrrrrrrrrrr

don't take offense, that is the nature of wiki, just make the change and if someone is wrong change it back with an explaination, which is what you do Snoble 19:59, 4 April 2008 (MDT)