Affa
Maintainer
Michael Weinberger
Affa was contributed on Thu Apr 05, 2007
Description
The main purpose of this affa package is to make a SME 7 Server a dedicated backup box in a few minutes. Affa backs up as many SME servers as you like or any other servers which have sshd running and rsync installed. Once it is configured, Affa runs reliably unattended and sends warning messages in case of any errors.
All backup archives are full backups, as Affa make use of the hardlink technique. Therefore a new full backup only needs disk space for the differences plus the filesystem overhead for the hardlinks and directories (which is typically 2-3%).
Affa is based on the rsync program and supports the rsync --compress option. This allows you to run backups over the internet or VPN. A typical setup is one or more Affa backup servers placed in different locations, which backup the production server(s) over the VPN.
A special feature is the rise option, which allows you to rise the backup server to your production server from a backup archive in case of a dead loss of your production server. The rise is executed within a extremely short time, even with huge amount of data. The rise feature uses hardlinks and therefore does not use up additional disk space.
Affa is a command line tool for system administrators and is intentionally designed without a GUI. Therefore it can be efficiently managed on the console and over slow internet connections.
Affa features at a glance
- Affa is secure: All transfers and connections are made by using the ssh protocol with public/private key authentication
- Periodically runs unattended full backups. Only differences to the previous full backup are transferred over the network
- Using rsync with optional bandwidth limit and compression allows backups over the internet
- Uses hardlink technique, i.e. physical disk space only needed for the differences between two full backups
- Keeps a configurable number of scheduled, daily, weekly, monthly and yearly full backup archives
- The archives are browseable. No need to unpack them first.
- Backup jobs are started by the cron daemon
- Interrupted jobs continuing with already transfered data when restarted
- Backups the default e-smith directories and files, when property SMEServer is set to yes
- Additional directories and files can be included
- Directories and files can be excluded from the backup
- Non-SME server linux systems can be backed up by setting the SMEServer property to no and using an include list
- Configurable nice level for rsync processes on the backup and source server
- Optional run of custom programs before and after a job run (e.g. running tape backup)
- Checks the disk space left after a job run with warning levels strict, normal or risky
- Extensive checking of failure conditions
- Sends failure messages to a configurable list of email addresses
- Sends a warning message, if the backup server runs out of disk space
- Installs an optional watchdog on the source server in case the backupserver fails
- Watchdog sends warning, if an expected backup did not run
- Watchdog sends a daily reminder message, if the error continues unchecked
- Option to display current status of all jobs showing times of last and next run, size and disk usage
- Status can be mailed on a daily, weekly or monthly schedule
- Option to display all existing archives of a job shown date, size, nbr of files and disk usage
- Option to send (and revoke) the public key to the source server (SME Server only)
- Option to rise the backup server to a production server from a backup. For SME 7 only
- The rise feature does not physically move data and therefore is extremly fast and needs (almost) no extra disk space
- Rise option can be run remotely as the NIC driver configuration of the backup server are preserved
- Compares installed RPMs on source with backup server. Sends warning message, if not in sync
- Undo rise option to restore the backup server
- Configurable via a e-smith style db, with one record for each job and a default record for all jobs
- Logs to /var/log/affa/JOB.log and /var/log/affa/affa.log with optional debug switch for higher verbosity
- Log files are rotated weekly, with 5 logs kept
Installation or Update
/usr/bin/yum install --enablerepo=smecontribs smeserver-affa
Quick start example
You have a SME 7 production server with hostname 'prodbox‘ and IP 10.200.48.1.
Set up a second SME 7 box as your backupserver with hostname 'affabox‘ and IP 10.200.48.2.
- log into the 'affabox' and install the packages as described above.
- copy the config helper script sample cp /usr/lib/affa/jobconfig-sample.pl /root/prodbox-job.pl
- edit /root/prodbox-job.pl and set my $jobname='prodbox'; and 'remoteHostName‘=>'10.200.48.1', optionally, if the remote server port is configured to e.g. 2222 then set 'sshPort'=>2222,
- write the configuration (this makes the database entries and sets up the cronjobs) /root/prodbox-job.pl
- generate the DSA keys and send the public key to the 'prodbox'
affa --send-key prodbox
- run the job manually affa --run prodbox
Configuration
The configuration is stored in an e-smith style database. Use the db command to configure Affa.
The jobname is the record key with the type 'job'.
To setup a new job with the name 'prodbox' enter:
db affa set prodbox job
then set the properties
db affa setprop prodbox remoteHostName 192.168.1.1 db affa setprop prodbox TimeSchedule '0030,0730,1130,1330,1730,2030' db affa setprop prodbox Description 'My Production Server' db affa setprop prodbox status enabled
and so on...
Alternatively you can you use a script as described above in the 'Quick start' chapter.
To verify your work, type:
db affa show prodbox
Finally set up the cronjobs:
affa --make-cronjobs
Job configuration properties
| Property | Value | Default | Description |
| remoteHostName | FQHN or IP | FQHN or IP of the source host (mandatory) | |
| TimeSchedule | HHMM,HHMM,... | doesn't need to be ordered. At least one time is mandatory | |
| Description | text string | ||
| scheduledKeep dailyKeep weeklyKeep monthlyKeep yearlyKeep |
integer >= 1 | 2 7 4 12 2 |
how many of the scheduled, daily, weekly, monthly or yearly backups should be kept |
| SMEServer | yes or no | yes | when set to yes the default e-smith directories are automatically included and the property RPMCheck=yes can be used |
| Include[0] Include[1] ... |
full path | additional files or directories to include | |
| Exclude[0] Exclude[1] ... |
full path | additional files or directories exclude from backup | |
| RPMCheck | yes or no | no | Only applicable to jobs that backups a SME 7 server. Compares the packages installation of the source host with this affa backup host. Sends a message with diff list if not in sync. This check is usefull, if you want have the option to rise the backup server to a production server from a backup. |
| DiskSpaceWarn | strict or normal or risky or none | strict | run a disk space check after a job has been completed. With level 'strict' a warning message will be sent, if the available space is less then the size of the just completed backup. With level 'normal'/'risky' the message is sent, if less than 50%/10% of the backup size is still available. |
| localNice | -19...+19 | 0 | run rsync local process niced. |
| remoteNice | -19...+19 | 0 | run rsync process on source niced. |
| Watchdog | yes or no | yes | Only applicable to jobs that backups a SME 7 server. When a job is started, affa installs a watchdog script on the source in /etc/cron.d/, which sends a warning message, if the next scheduled job (taken from the TimeSchedule property + 10 minutes) did not run. This guarantees, that you will be notfied even in case of a affa server outage. The watchdog script send a daily reminder message, if the error continues. The next run job replaces the watchdog script with a new trigger time. |
| sshPort | service port | 22 | When sshd on the source host or your firewall listen on a non-standard port set the port here. |
| ConnectionCheckTimeout | seconds | 120 | before the rsync process is started on the remote source host, affa checks the ssh connection and exits with an error after the configured time, if the host does not respond. |
| rsyncTimeout | seconds | 900 | Rsync exits, if no data is transferred for the configured time. This avoids infinitely hanging in case of a network error. |
| BandwidthLimit | integer>=0 kilobytes per second | 0 | Limits the data transfer rate. A value of zero specifies no limit. |
| rsyncCompress | yes or no | no | compress the transferred data. May be useful with slow internet connections. Increases CPU load on source and backup host. |
| EmailAddresses | name@domain.com,name@domain.com,... | admin | comma separated list of mail addresses, where the messages should be sent to Note: By default Affa only sends messages on errors, never on success (see property chattyOnSuccess). |
| chattyOnSuccess | integer >= 0 | 0 | when set to a value>0, Affa sends a message on a successfully completed job run and decrements the chattyOnSuccess value. When the value has reached zero, Affa falls back to the default and only sends messages on errors. |
| AutomountDevice AutomountPoint |
full path | Device and mountpoint of backup device (e.g. USB disk). Device is automounted before a job starts and unmounted after job completion. With both properties empty no automount is done. | |
| AutomountOptions | string | An option string passed to the mount command | |
| AutoUnmount | yes or no | yes | When set to 'no' the automounted device stay mounted after the Affa run. |
| preJobCommand postJobCommand |
full path | programs (local on the affa server) to be executed before/after a job run. The job name and type (scheduled, daily etc.) are passed as arguments to the program. The exit code is additionally passed to the post job command program. See /usr/lib/affa/ for sample perl scripts. | |
| RootDir | full path | /var/affa | where to store the backup archives, Do not use /home/e-smith or /root as these are included in the backup and therefore the rise option will not work! Recommended: /var/affa |
| Debug | yes or no | no | set to yes to increase log verbosity |
| status | enabled or disabled | enabled | with set to disabled, no cron entries will made. You can still run a job manually. |
| rsync--inplace | yes or no | yes | set to no, if the rsync version on the source does not support this option (like rsync on SME6) |
| rsync--modify-window | integer >= 0 | 0 | When comparing two timestamps, rsync treats the timestamps as being equal if they differ by no more than the modify-window value. This is normally 0 for an exact match. A value >= 0 is useful if you can't get the clocks of the source and the Affa server in sync. |
| rsyncdMode | yes or no | no | set to yes to connect to the rsync daemon on the remote host (instead of running rsync over ssh) |
| rsyncdModule | string | AFFA | the rsyncd module name (only applicable with rsyncdMode=yes) |
| rsyncdUser | string | affa | the username for authentication to the rsync daemon (only applicable with rsyncdMode=yes) |
| rsyncdPassword | string | the password for authentication to the rsync daemon (only applicable with rsyncdMode=yes) | |
| remoteOS | cygwin | with remoteOS=cygwin the options --send-key and --revoke-key uses the account 'Administrator' and the correct path for the public key on a Windows/Cygwin remote host. |
Default configuration properties
All properties can be set as defaults in the DefaultAffaConfig record. This is useful, when you set up many similar jobs. Example: You want to set the property 'localNice' to 19 for all jobs. Then run
db affa setprop DefaultAffaConfig localNice 19
and don't set this property for the jobs. Properties set in the job record overrides the defaults.
The special property 'sendStatus' is only applicable to the DefaultAffaConfig record. It controls the status report sent by email and can be set to the values 'none', 'daily', 'weekly' or 'monthly'. To setup a weekly status report run:
db affa setprop DefaultAffaConfig sendStatus weekly
then setup the cronjob:
affa --make-cronjobs
Global disable
All jobs can be disabled with setting the AffaGlobalDisable record type to 'yes'.
db affa set AffaGlobalDisable yes affa --make-cronjobs
to re-enable run:
db affa set AffaGlobalDisable no affa --make-cronjobs
Usage and command line options
affa --run JOB
Starts a job run. Usually done by the cronjob.
affa --make-cronjobs
Configures the cronjobs as scheduled in the jobs records.
affa --send-key JOB
affa --send-key --host=TARGETHOST [--port=PORT] [--remoteOS=cygwin]
This first generates the DSA key for the Affa Server, if not already done. Then it sends the public key to the host 'remoteHostName' as configured in the record of job JOB and generates the job specific ssh known host entry.
affa --full-restore JOB [ARCHIVE]
Does a full restore from the backup ARCHIVE on the remote source server as defined in the JOB record. If ARCHIVE is not given, the archive 'scheduled.0' is used as the default. The full restore reconstructs the server as it was at the time of the backup. After the restore the source host reboots.
affa --rise JOB [ARCHIVE]
Runs a full restore from the backup ARCHIVE on the Affa server (!) from the backup ARCHIVE of job JOB. In other words: After completion, the Affa box reboots as a clone of the source server. Ensure, that the source server has been powered off before you reboot the Affa box, otherwise the network interface will not come up. This is important, when you run --rise remotely. The --rise feature only works with SME 7 servers.
affa --undo-rise
This feature reverts a risen Affa box to a backup server. After a reboot, all configured jobs will work again.
affa --list-archives [--csv] JOB
Displays a table of all present archives of job JOB with date, number of files, size and disk usage. See chapter 'Restore' for an output example. With --csv, the output is in machine readable colon separared format.
affa --status [--csv]
Displays a table of all configured jobs with enable status, time of last and next run, size, disk usage and the number of scheduled (s), daily (d), weekly (w), monthly (m) and yearly (y) archives. Last time shows 'failed', if a job did not run in the last 24h. For disabled jobs 'Last' always shows 'failed' after 24 h. To see the date and time of the last run of those jobs use the --list-archives option. Column 'Next' shows the time when the next run will be started, if 'Enabled' is 'yes'. Column 'Disk usage' shows the usage of the partion, where the RootDir of the job is located on. If all jobs are located in the same RootDir, identical disk usage is shown for all jobs. If RootDir is /var/affa, the usage of the SME server system partition is shown.
Affa version 0.8.0 on backup.mydomain.de (10.204.48.2) +---------------+------+--------+-------+--------+------------+----------------+ | Job | ENBL | Last | Next | Size | Disk usage | N of s,d,w,m,y | +---------------+------+--------+-------+--------+------------+----------------+ | bookkeep | yes | 23:48 | 23:30 | 4.5GB | 616GB/47% | 2,7,4,2,0 | | crm | yes | 11:20 | 13:20 | 47MB | 616GB/47% | 7,7,4,2,0 | | fespdc | yes | 09:55 | 12:45 | 40GB | 616GB/47% | 6,7,4,2,0 | | helpdesk | yes | failed | 13:40 | 70MB | 616GB/47% | 7,7,4,2,0 | | imageserv | yes | 23:01 | 23:00 | 19GB | 616GB/47% | 2,7,4,1,0 | | intraweb | yes | 10:32 | 13:30 | 1.4GB | 616GB/47% | 7,7,4,2,0 | | pdcaus2 | yes | 23:01 | 12:15 | 5.4GB | 616GB/47% | 2,7,4,2,0 | | persoff | yes | running (pid 17521) | 616GB/47% | 2,7,4,2,0 | | primmail | yes | 10:09 | 13:00 | 45GB | 616GB/47% | 7,7,4,2,0 | | rayofhope | yes | 22:32 | 22:30 | 20GB | 616GB/47% | 2,7,4,1,0 | | sozserv | yes | 22:30 | 22:30 | 8.0GB | 616GB/47% | 2,7,4,2,0 | +---------------+------+--------+-------+--------+------------+----------------+ | az32share | no | - | 02:20 | 234MB | 616GB/47% | 7,7,2,0,0 | | azpdc | no | - | 21:00 | 42GB | 616GB/47% | 2,7,1,0,0 | +---------------+------+--------+-------+--------+------------+----------------+
With --csv, the output is printed in a machine readable colon separated format.
affa --show-schedule
Prints a 'graphical' timetable for all enabled jobs. The resolution is 30 minutes. Disabled jobs are not shown.
Affa version 0.8.0 on backup.mydomain.de (10.204.48.2)
TIME 0:00 4:00 8:00 12:00 16:00 20:00
crm -X------ -------- -------- -------- -------- --------
sozserv --X----- -------- -------- -------- -------- --------
fespdc ----X--- -------- -------- -------- -------- --------
imageserv -----X-- -------- -------- -------- -------- --------
primmail ------X- -------- -------- -------- -------- --------
intraweb -------- X------- -------- -------- -------- --------
bookkeep -------- ------X- X-X-X-X- X-X-X-X- X-X-X-X- X-X-X---
pdcaus2 -------- -------- -------- X------- -------- ------X-
persoff -------- -------- -------- -------- -------- ---X----
helpdesk -------- -------- -------- -------- -------- -----X--
rayofhope -------- -------- -------- -------- -------- -----X--
2 disabled jobs not listed
affa --send-status
Sends the status table to the email adresses configured in the 'DefaultAffaConfig' record. Used by the cronjob 'affa-status'.
affa --mailtest JOB
Sends a test email to the email adresses configured in the JOB record. With property Watchdog=yes, a test email is sent from the remote host, too. Use this to verify, that your mail processing is functional.
Note: By default Affa only sends messages on errors, never on success (see property chattyOnSuccess).
affa --cleanup JOB
After you have lowered a keep value, e.g. scheduledKeep, then archives with a higher indices will no longer be shifted and will exist for ever. This option finds these archives and deletes them.
affa --rename-job JOB NEWNAME
Renames the job JOB to NEWNAME including all database records and archive directories.
affa --move-archive JOB NEWROOTDIR
Moves the archive directory of job JOB to the rootdir NEWROOTDIR and adjusts the property RootDir. NEWROOTDIR must be a full path starting with a slash. As moving across filesystems (e.g. from an external USB drive to the local disk) is not possible, Affa uses a copy command in this case and deletes the source directory after that. Depending on the archive size, copying across filesystems can take a long time.
affa --delete-job [--revoke-key] JOB
Irreversibly deletes a job including all archives, configuration and report databases. With given --revoke-key option, the public key on the remote server will be deleted.
affa --revoke-key JOB
affa --revoke-key --host=TARGETHOST [--port=PORT] [--remoteOS=cygwin]
Deletes the public dsa key on the remote server.
affa --check-connections
Checks the ssh login for all configured jobs. For jobs where the public key was not yet sent, you are prompted for the password and the key will be sent then.
affa --kill JOB
Terminates the running job JOB and all its child processes (rsync processes).
Example setups
[Todo] Standard
Dedicated Affa server to backup all production servers
...
[Todo] Local Affa server plus a Affa server in remote location
meanwhile see forum post
Backup single ibays
Suppose you want to backup the ibays 'staff1' and 'staff2' on your production server with WAN IP 82.123.1.1 to an Affa server in a different location over the internet every night at 2:30am.
- log into the Affa server and install the packages as described above.
- copy the config helper script sample cp /usr/lib/affa/jobconfig-sample.pl /root/ibay-staff-job.pl
- edit /root/ibay-staff-job.pl and set my $jobname='ibay-staff'; and 'remoteHostName‘=>'82.123.1.1', 'TimeSchedule'=>'0230', 'SMEServer'=>'no', 'Include[0]'=>'/home/e-smith/files/ibays/staff1', 'Include[1]'=>'/home/e-smith/files/ibays/staff2',
- write the configuration /root/ibay-staff-job.pl
- send the public key to the production server affa --send-key ibay-staff
- check next morning affa --list-archives ibay-staff affa --status ls /var/affa/ibay-staff
[Todo] Two production servers backup each other
...
Backing up a Windows computer
Backing up data from a Windows system requires the Cygwin Rsyncd daemon installed and configured on Windows. The standard procedure rsync over ssh does not work, as the Cygwin rsync process always hangs after some files were transferred.
Rsyncd setup on the Windows computer
Install the Cygwin base, the rsync package and configure the Rsyncd service as described in this document: Rsyncd setup on a windows computer for use with Affa backup'. The installation of the sshd service is optional and not needed for the backup itself, but having a ssh login can be very helpful for administration or executing scripts on the Windows system. Affa supports sending the public key to a Windows Cygwin for password-less login.
Note: Affa does not backup the Windows Access Control List (ACL) information. You may need to correct the ACLs manually after a restore.
Affa Rsyncd mode setup (Quick start example)
You want to backup the My Documents folders of the users ssorglos and bsimpson from the Windows computer 'ws001' with IP 192.168.1.65 to your Affa server 'affabox' with IP 192.168.1.3.
1. log into the 'affabox' and copy the Cygwin config helper script sample
cp /usr/lib/affa/jobconfig-cygwin-sample.pl /root/ws001-mydocs-job.pl
2. edit /root/ws001-mydocs-job.pl and set
my $jobname='ws001-mydocs';
and
'remoteHostName‘=>'192.168.1.65', 'rsyncdPassword'=>'secretword', 'Include[0]'=>'/c/Documents and Settings/ssorglos/My Documents/', # don't use backslashes in pathnames! 'Include[1]'=>'/c/Documents and Settings/bsimpson/My Documents/',
where secretword must be replaced by the password you have chosen in the rsyncd.secretsfile on the Windows box.
3. write the configuration (this makes the database entries and sets up the cronjobs)
/root/ws001-mydocs-job.pl
4. run the job manually. After completion check the archive /var/affa/ws001-mydocs/scheduled.0 and the logfile /var/log/affa/ws001-mydocs.log
affa --run ws001-mydocs
Affa Rsyncd mode manual setup
In case you want to do the setup manually using the db command, these are the mandatory settings for Cygwin Rsyncd mode
db affa setprop JOB rsyncdMode yes db affa setprop JOB rsyncdModule AFFA db affa setprop JOB rsyncdUser affa db affa setprop JOB rsyncdPassword secretword db affa setprop JOB SMEServer no db affa setprop JOB RPMCheck no db affa setprop JOB Watchdog no
Optional for ssh login
db affa setprop JOB remoteOS cygwin
Use Affa to backup to a NFS-mounted NAS or a local attached USB drive
You want to backup your SME 7 production server with hostname 'prodbox‘ and IP 10.200.48.1 on a mounted filesystem instead of setting up a dedicated Affa box.
Setup NAS
You have a FreeNAS box with IP 10.200.48.2 up and running with NFS service enabled. The disk is mounted to /mnt/affashare. You have authorized the IP address of your prodbox server to access share /mnt/affashare.
- log into the 'prodbox' and install the NFS packages /usr/bin/yum install --enablerepo=smecontribs smeserver-nfs Now enable and start the portmapper service config setprop portmap status enabled service portmap start
- mount the NFS share mkdir -p /mnt/affadevice mount 10.200.48.2:/mnt/affashare /mnt/affadevice
Alternatively setup a USB drive
- log into the 'prodbox'
- Connect a USB hard disk to the USB Bus. Now you must determine what device the kernel has assigned to the drive. View the /var/log/message and search for Initializing USB Mass Storage driver. A few lines below you'll find the name of the device. In this example it is sdh. Replace /dev/sdh by your device in following instructions.
- Use the fdisk program to create a linux partition. Verify that this is really the attached USB drive before you continue! fdisk /dev/sdh You'll most likely find an existing vfat dos partition, which you have to delete first. In the following we assume, that you have created a single partition /dev/sdh1.
- Now format the drive with an ext3 filesystem mkfs.ext3 /dev/sdh1
- Make the mount point mkdir -p /mnt/affadevice
- Add the following line to the /etc/fstab /dev/sdh1 /mnt/affadevice ext3 defaults
- Mount the drive mount /mnt/affadevice
- Crosscheck your work using the df command df
Setup Affa
You want to run backups on 11:30 h, 15:30 h and 19:30 h and you want to keep the last 3 scheduled backups, 7 daily, 5 weekly, 12 monthly and 1 yearly backups.
- log into the 'prodbox' and install the Affa packages as described above.
- copy the config helper script sample cp /usr/lib/affa/jobconfig-sample.pl /root/prodbox-job.pl
- edit /root/prodbox-job.pl and set my $jobname='prodbox'; and 'remoteHostName‘=>'localhost', 'TimeSchedule'=>'1130,1530,1930', 'scheduledKeep'=>3, 'dailyKeep'=>7, 'weeklyKeep'=>5, 'monthlyKeep'=>12, 'yearlyKeep'=>1, 'RootDir=>'/mnt/affadevice', Review the other properties and change them to your needs.
- write the configuration /root/prodbox-job.pl
- run the job manually affa --run prodbox
Limitations
With this kind of setup you cannot use the affa rise feature, as it requires the backup archive to be located on the same fileystem as the server installation. The rise option uses hardlinks, which are not working across filesystems.
Automount
Having the backup archives in the same filesystem is always a risk, which can be minimized by using the automount feature. Then the external filesystem is only mounted during a job run.
In the NAS example set
'AutomountDevice=>'10.200.48.2:/mnt/affashare', 'AutomountPoint =>'mnt/affadevice',
and skip the step 2.
In the USB drive example set
'AutomountDevice=>'/dev/sdc1', 'AutomountPoint =>'mnt/affadevice',
and skip the steps 5 to 8.
The mount point will be automatically created, if it does not exist.
For access to the archive directory, you need to mount it manually.
Restore
Restore single files or directories
Example 1: It's June, 12th 11:30, when user 'briedlin' asks you to restore the messages of his mailbox 'orders' he has inadvertently deleted today at 9:00 am.
- You first must check what backup archives are available. The jobname of this server backup is 'prodserv'.
affa --list-archives prodserv
Affa version 0.8.0 on affa1.mydomain.de (10.204.48.2) +-----------------------------------------------------------------------------+ | Job: prodserv | | Description: File- and Mailserver Frankfurt 2 | | Directory: /var/affa/prodserv/ | | Hostname: 10.204.48.1 | | Email: sysadmin@mydomain.de | +-----------------------+----------------+--------------+--------+------------+ | Date | Archive | Files | Size | Disk usage | +-----------------------+----------------+--------------+--------+------------+ | Sun 2007 Apr 29 04:07 | monthly.0 | 428916 | 41GB | 554GB/42% | +-----------------------+----------------+--------------+--------+------------+ | Sun 2007 May 13 04:08 | weekly.3 | 441911 | 43GB | 493GB/37% | | Sun 2007 May 20 04:09 | weekly.2 | 453436 | 44GB | 522GB/40% | | Sun 2007 May 27 04:10 | weekly.1 | 460610 | 45GB | 547GB/41% | | Sun 2007 Jun 03 04:11 | weekly.0 | 464119 | 45GB | 603GB/46% | +-----------------------+----------------+--------------+--------+------------+ | Mon 2007 Jun 04 07:05 | daily.6 | 464733 | 45GB | 599GB/45% | | Wed 2007 Jun 06 04:15 | daily.5 | 463527 | 45GB | 617GB/47% | | Thu 2007 Jun 07 04:15 | daily.4 | 464299 | 46GB | 629GB/48% | | Fri 2007 Jun 08 04:11 | daily.3 | 464200 | 46GB | 617GB/47% | | Sat 2007 Jun 09 04:12 | daily.2 | 463342 | 46GB | 617GB/47% | | Sun 2007 Jun 10 04:12 | daily.1 | 462894 | 46GB | 614GB/47% | | Mon 2007 Jun 11 04:11 | daily.0 | 460669 | 45GB | 619GB/47% | +-----------------------+----------------+--------------+--------+------------+ | Mon 2007 Jun 11 13:11 | scheduled.6 | 454748 | 45GB | 621GB/47% | | Mon 2007 Jun 11 16:16 | scheduled.5 | 454664 | 45GB | 621GB/47% | | Mon 2007 Jun 11 19:10 | scheduled.4 | 454813 | 45GB | 622GB/47% | | Mon 2007 Jun 11 23:08 | scheduled.3 | 455289 | 45GB | 618GB/47% | | Tue 2007 Jun 12 04:12 | scheduled.2 | 455407 | 45GB | 616GB/47% | | Tue 2007 Jun 12 07:05 | scheduled.1 | 455400 | 45GB | 616GB/47% | | Tue 2007 Jun 12 10:09 | scheduled.0 | 453931 | 45GB | 616GB/47% | +-----------------------+----------------+--------------+--------+------------+
- Choose the scheduled.1 archive, which was created less than two hours before the accident. Now restore the mailbox 'orders' using the rsync command.
- Now run the rsync command: export RDIR=/home/e-smith/users/briedlin/Maildir/.orders/ Note the trailing slash! rsync -av /var/affa/prodserv/scheduled.1/$RDIR 10.204.48.1:$RDIR
Example 2: A user has deleted the file orderform.pdf from ibay 'docs' and asks you to restore it.
- You have searched and found the latest version of this file in archive weekly.
- Copy it back to the server: export RFILE=/home/e-smith/files/ibays/docs/files/orderform.pdf rsync -av /var/affa/prodserv/weekly.1/$RFILE 10.204.48.1:$RFILE
Example 3: Restoring a file with special characters in the path
Do not use shell variables to shorten the command. It would complicate things more than it would help. Quote the source and destination path. In the destination path escape blank characters with a double backslash and brackets with a single backslash.
rsync -av "/var/affa/fileshare/daily.4/home/e-smith/files/ibays/mechfiles/files/Valve Control (Design Gr)/VALVE LIST FOR ISSUED.xls" "192.168.1.7:/home/e-smith/files/ibays/mechfiles/files/Valve\\ Control\\ \(Design\\ Gr\)/VALVE\\ LIST\\ FOR\\ ISSUED.xls"
Full restore
To run a full restore of user and configuration data run on the Affa server
affa --full-restore <JOB> [<ARCHIVE>]
This rsyncs the data from the backup ARCHIVE back to the 'remoteHostname' defined in the configuration of the job JOB.
Example: You have backuped your production server 'prodsrv' as job 'prodbox'. To restore from the latest backup run
affa --full-restore prodbox
To restore from the older archive daily.3 run
affa --full-restore prodbox daily.3
Moving a SME 7 server installation to new hardware using the Affa rise feature
Please see this Howto: Moving SME to new Hardware
FAQ
Can I use Affa to backup a SME 6 server?
To backup a SME 6 server set the property 'rsync--inplace' to 'no' and install the perl-TimeDate package on the SME 6 box. The perl-TimeDate package is needed by the watchdog script running on the SME 6. Use the RPM from DAG: perl-TimeDate-1.16-0.rh73.dag.noarch.rpm
You cannot use the RPMCheck property.
How can I move a backup archive from my production server in a remote branch office to the Affa server using an USB disk? I want to avoid to download the first full backup over the internet.
Install Affa on your production server, connect and mount the USB disk. Setup a job to write the archive to the USB disk. After the job run, connect the USB disk to your Affa server and setup the job in the same way. Use the setup script from the archive directory. You only need to change the remoteHostName property. Now use the --move-archive option to move the archive to the local disk. If not already done, send the public key to your production server. You're done.
How do I backup two SME servers behind a firewall?
First you need to configure port forwardings for the ssh service on your firewall. Use a non-standard port ,e.g 2200->22, for your second server. Setup a job on your Affa server for each of your production servers. Set up the job property sshPort=2200 for second server.
Uninstall
This removes the installed Affa package, all configuration data and all backup archives.
Run the following commands for each job:
affa --revoke-key JOBNAME affa --delete-job JOBNAME
Verify that all jobs have been deleted
affa --status
Remvove the Affa package
/usr/bin/yum remove smeserver-affa
Cleaning up
rm -f /etc/cron.d/affa /etc/cron.d/affa-status rm -rf /home/e-smith/db/affa /home/e-smith/db/affa-report rm -rf /var/affa /var/log/affa
Additional information
Performance
It is hard to predict how much time a backup job needs to complete. It depends on the number of files, the total file size, the file changes since last run, the network speed and not least on the CPU power, disk speed and RAM of the source and backup server. The following table of measured values will give you an idea of what you can expect.
| Backup server | Source server | Data on source server | Transferred Data | Connection | Compression | Affa run time |
| 2x3.2GHz Xeon 2 GB RAM, 1.5 TB RAID6 |
2x3.2GHz Dual Core Xeon 4 GB RAM, RAID5, SME 7.1 Intranet Web Server + MySQL |
1.4 GB, 12,000 files | 300 MB, 16 files | Internet 2 Mbit | yes | 2 minutes |
| 2x3.2GHz Xeon 2 GB RAM, 1.5 TB RAID6 |
2x3.2GHz Dual Core Xeon 4 GB RAM, RAID5 SME 7.1 Mailserver |
43 GB, 410,000 files | 140 MB, 2,700 files | Internet 2 Mbit | yes | 10 minutes |
| 2x2GHz Dual Core Xeon 5130 6 GB RAM, 1 TB RAID 5 |
2x2GHz Dual Core Xeon 5130 6 GB RAM, 1 TB RAID 5 SME 7.1 File- and Mailserver |
125 GB, 98,000 files | 3,2 GB, 3,000 files | Gbit LAN | no | 25 minutes |
| 2x2GHz Dual Core Xeon 5130 6 GB RAM, 874 GB RAID 5 |
2x2GHz Dual Core Xeon 5130 6 GB RAM, 1 TB RAID 5 SME 7.1 File- and Mailserver |
125 GB, 98,000 files | 3.5 GB, 2000 files | Internet 2 Mbit | yes | 17 minutes |
| 2x800MHz Pentium 3 1 GB RAM, 300 GB RAID1 |
2x2.8GHz Xeon, 1GB RAM, 140 GB RAID5 SME 7.1 File- and Mailserver |
39 GB, 370,000 files | 12 GB, 4,000 files | 100Mbit LAN | no | 52 minutes |
| 1xP4 2.4GHz 256 MB RAM SME 7.1 |
2xP4 1GHz 1 GB RAM SME 6 |
7.4 GB, 134,790 files | 7.4 GB, 134,790 files | 100Mbit LAN | no | 35 minutes |
Note: The last action of a job run is to remove the oldest backup, e.g. if archive scheduled.11 exists and you have set the scheduledKeep property to 12, then it must be deleted. This can take a significantly long time, which increases the total job execution time.
A affa --rise run on a SME 7.2, 40 GB data, 411.500 files, 2x2.8 Xeon CPU, 1GB RAM, SW-RAID 5 with 4 U320 SCSI drives took 7 minutes including the final reboot.
Bug report
Affa is listed in the bugtracker contribs section. Please report all bugs, new feature requests and documentation issues there.
Changelog
* Mon Mar 03 2008 Michael Weinberger 0.9.0-5
delete new style Dovecot's index files dovecot.index*
delete dovecot index files on remote server in --full-restore
* Fri Feb 29 2008 Michael Weinberger 0.9.0-4
set localhost as default remoteHostName in /etc/e-smith/templates//etc/cron.d/affa/00jobs
* Wed Feb 27 2008 Michael Weinberger 0.9.0-3
removed %post from spec file
* Sat Feb 02 2008 Michael Weinberger 0.9.0-2
Bugfix: Report db was not deleted in deleteJob()
don't use -q on ssh commands with Debug=yes
* Fri Feb 1 2008 Shad L. Lords <slords@mail.com> 0.9.0-1
- Fix specfile for building in new buildsystem
* Fri Jan 18 2008 Michael Weinberger
Version 0.9.0
Bugfix: run cronSetup() after job delete
Throw error if nothing was backed up (empty archive)
Added rsyncd support for backing up Windows/Cygwin
Added option and property remoteOS. Which remoteOS=cgywin the
send key and revoke key functions use the right path to the
authorized_keys2 file and login as user Administrator
* Sat Dec 29 2007 Michael Weinberger
Version 0.8.1
Automount Bugfix [Bug 3165]: Only exit with error on mount failure when in backup run. Otherwise log the error and continue.
* Thu Dec 20 2007 Michael Weinberger
Version 0.8.0
added bash completion script
added option --kill JOB
improved INT and TERM signal handling
replaced all scp commands by rsync
added poperty BandwidthLimit (unit KBytes/sec)
each job write its own known hosts entry using ssh option HostKeyAliasOption
affa --send-key w/o arguments sends the keys for all jobs
removed Property StrictHostKeyChecking
UPDATE FROM VERSIONS<8: run the command 'affa --send-key' to generate the known hosts entries for all jobs
* Wed Dec 12 2007 Michael Weinberger
Version 0.7.0
Modified logging: Job run logs to /var/log/affa/JOBNAME.log, all other to /var/log/affa/affa.log
Bugfix: Check error status of --send-key and --revoke-key
New: Options --show-schedule
Modified: Option --list-archives now accepts multiple args or none
Fix: install watchdog on source server before every run not only scheduled, to avoid watchdog triggered if a non-scheduled run take to long time.
* Wed Nov 28 2007 Michael Weinberger
Version 0.6.8
Bugfix: Automount was done too late. Daily backup never ran.
* Wed Nov 21 2007 Michael Weinberger
Version 0.6.7
Bugfix: Size and No. of files were not shown in --status
Improved deleting of directories
added --check-connections option
Increased width of job column in --stats table
* Sun Nov 11 2007 Michael Weinberger
Version 0.6.6
Property rsync--modify-window added
Modified recursivly deleting directories
* Wed Nov 07 2007 Michael Weinberger
Version 0.6.5
ssh options added to scp commands
added post-backup event
* Wed Aug 08 2007 Michael Weinberger
Version 0.6.4
delete dovcot index files after a --rise
* Thu Jul 05 2007 Michael Weinberger
Version 0.6.3
Bugfix: with RPMCheck=yes the affa-rpmlist was not found in the
archive. Wrong path to schedule.0 instead of scheduled.running.
Side effect of changes in version 0.5.0. [Bug 3128]
* Tue Jul 03 2007 Michael Weinberger
Version 0.6.2
Bugfix: Filesys::DiskFree requires $ENV{LANG}="en_US" [Bug 3119]
Bug reported to bug-Filesys-DiskFree [at] rt.cpan.org
* Mon Jun 25 2007 Michael Weinberger
Version 0.6.1
Fix 3080 was not applied.
* Mon Jun 18 2007 Michael Weinberger
Version 0.6.0
- Replaced Filesys::DiskSpace by Filesys::DiskFree as the latter supports CIFS file system
- using Filesys::DiskFree->mount and ->device instead of scanning /proc/mounts
- mkdir RootDir only on job run to avoid making it in an unmounted mountpoint
* Mon Jun 18 2007 Michael Weinberger
Version 0.5.2
- Sending ssh key failed. When grep returned an error
the mv command was not executed. Using ';' instead of '&&'
for chaining commands. [Bug 3080]
- /root/.ssh/authorized_keys2: No such file or directory warning.
Run a touch to guarantee, that the file exists. [Bug 3080]
- same issue with --revoke-key
* Thu Jun 14 2007 Michael Weinberger
Version 0.5.1
- Bugfix automount: getStatus() unmounts the device while a job is running
- Status table: Last=never, if there are no archives at all
* Tue Jun 12 2007 Michael Weinberger
Version 0.5.0
- New property AutomountOptions
- status table: grouped disabled jobs. Show Last='-' for disabled jobs instead of 'failed'
- unlink lockfile in getLock()
- Changes to improve robustness in case of network outage:
- writing to a temporary archive scheduled.running and linkdest
against the latest existing archive (usually scheduled.0). Then
shift archives and rename scheduled.running to scheduled.0
- scheduledKeep=1 is now allowed
- also check connection in daily,weekly etc., not only in scheduled run
- don't run daily, weekly, monthly or yearly, when scheduled.0 doesn't exist.
- new option --revoke-key
- added optional option --revoke-key to --delete-job
- avoid multiple adding public key to authorized_keys2 on source server
* Wed Jun 06 2007 Michael Weinberger
Version 0.4.7
- use StrictHostKeyChecking=no in sendKeys()
* Tue Jun 05 2007 Michael Weinberger
Version 0.4.6
- mailtest: Send also a testmail from the remotehost, when property Watchdog=yes
- removed useless code in mailTestWatchdogRemote()
* Mon Jun 04 2007 Michael Weinberger
Version 0.4.5
write job config file to the archive dir
* Thu May 31 2007 Michael Weinberger
Version 0.4.4
- added property StrictHostKeyChecking (ssh option)
- string comparison instead of numric for $job{'doneYearly'} ne $thisYear etc.
* Wed May 30 2007 Michael Weinberger
Version 0.4.3
- Minor bugfixes:
calculation of RootDirFilesystemUsage in .AFFA-REPORT
improved error handling with rsync status and df in DiskspaceWarn()
* Tue May 29 2007 Michael Weinberger
- Version 0.4.2
Infinite loop in execPostJobCommand() if command could not be executed:
Don't call execPostJobCommand() in affaErrorExit() if err==115
- RPMCheck property was ignored
- added Property chattyOnSuccess
- modified jobconfig-sample.pl to preserve 'doneDaily','doneWeekly','doneMonthly','doneYearly' and 'chattyOnSuccess'
- write error codes of affaErrorExit() to log
* Thu May 24 2007 Michael Weinberger
- Version 0.4.1
- fixed bug in disk usage calculation
* Mon May 21 2007 Michael Weinberger
- Version 0.4.0
- added option --rename-job
- changed syntax of --send-keys (!)
- added option --move-archive
* Sun May 20 2007 Michael Weinberger
- Version 0.3.3
- rebuild cronjobs after rise/undorise
- ignore job of own backup, when creating cronjobs (job appears after a rise run)
* Sun May 20 2007 Michael Weinberger
- Version 0.3.2
- man: added sshPort propperty
- chdir /tmp to avoid cwd warnings when the cwd disappears while running rise or undo rise
- bugfix: undorise() did not found own backup archive. Was searching for a wrong name
* Wed May 16 2007 Michael Weinberger
- Version 0.3.1 minor bugfixes
- checkCrossFS() did not work (used in --rise)
- jobconfig-sample.pl: deleting record before setting props
- Perl errors with --status before a job run
* Thu May 10 2007 Michael Weinberger
- Version 0.3.0
- man page completed
- mark archives with indices > keep setting with '*' in --list-acrchive output
- Option --delete-job
- Option --cleanup
- added --job=JOB alternative to --send-keys
* Wed May 09 2007 Michael Weinberger
- Version 0.2.0
- added --mailtest option
* Tue May 08 2007 Michael Weinberger
- Version 0.1.5
- improved --status output
- removed options --report and --send-report
- added option --show-archives
- added --csv for status and show-archives output in CSV format
- added property 'sshPort'
* Mon May 07 2007 Michael Weinberger
- Version 0.1.4
- don't install the remote watchdog, when remotehost is eq localhost
- improved check for remoteHostName eq localhost using DNS
- ssh -o PasswordAuthentication=no in checkConnection()
- added --full-restore
- missing check for HOSTNAME argument in --send-keys added
improved error check
- prevent run of --rise of localhost from own backup
* Mon Apr 30 2007 Michael Weinberger
- Version 0.1.3
modified 'use constant* syntax in watchdog script for compatibility with perl 5.6 on SME6
* Fri Apr 27 2007 Michael Weinberger
- Version 0.1.2
Bugfix: Preserve of ethernet driver setting with --rise did not work.
Also preserve NIC bonding.
* Mon Apr 23 2007 Michael Weinberger
- Version 0.1.1
scheduledKeep must be>=2 for --link-dest
set scheduledKeep to 2 if <2
- get lastrun date from affa-report rather than from report file
- added auto mount function
- added AutomountDevice and AutomountPoint to jobconfig-sample.pl
* Wed Apr 18 2007 Michael Weinberger
- Version 0.0.8
dont die if report db does not exist
* Wed Apr 18 2007 Michael Weinberger
- Version 0.0.7
run checkConnection() only for scheduled backups
added Size and Disk usage information to --status
* Thu Apr 12 2007 Michael Weinberger
- Version 0.0.5
fixed calculation of lastrun-now
* Thu Apr 12 2007 Michael Weinberger
- Version 0.0.4
- added --send-status plus templates
- fixed format error of times in affa --status
- show 'failed', if lastrun is older 1 day in affa --status
- fixed typo. default status=disabled (was disable)
* Fri Apr 06 2007 Michael Weinberger
- Version 0.0.3
- watchdog reminder was not deleted on soure
- wrong version mismatch list in rpm compare
* Thu Apr 05 2007 Michael Weinberger
- added 'rsync--inplace' property
* Mon Apr 02 2007 Michael Weinberger
- initial release
Files
/etc/e-smith/events/actions/affa-make-cronjobs /etc/e-smith/events/post-upgrade/S90affa-make-cronjobs /etc/e-smith/templates/etc/cron.d/affa-status/00run /etc/e-smith/templates/etc/cron.d/affa/00jobs /etc/logrotate.d/affa /etc/profile.d/affa.sh /sbin/e-smith/affa /sbin/e-smith/affa-rpmlist.sh /usr/lib/affa/COPYING /usr/lib/affa/jobconfig-cygwin-sample.pl /usr/lib/affa/jobconfig-sample.pl /usr/lib/affa/postJobCommand-sample.pl /usr/lib/affa/preJobCommand-sample.pl /usr/lib/affa/watchdog-mailtest.template /usr/lib/affa/watchdog.template /usr/man/man1/affa.1.gz
Acronym
Affa stands for Automatische Festplatten Fernarchivierung
