Db command tutorial
db command tutorial
The db command is unique to sme server. It is used to add settings to the various configuration databases which are then incorporated into the standard configuration files in /etc/.... via the template expansion process.
To display the syntax, at a command prompt type
db
then press Enter, which displays the usage:
/sbin/e-smith/db dbfile keys /sbin/e-smith/db dbfile print [key] /sbin/e-smith/db dbfile show [key] /sbin/e-smith/db dbfile get key /sbin/e-smith/db dbfile set key type [prop1 val1] [prop2 val2] ... /sbin/e-smith/db dbfile setdefault key type [prop1 val1] [prop2 val2] ... /sbin/e-smith/db dbfile delete key /sbin/e-smith/db dbfile printtype [key] /sbin/e-smith/db dbfile gettype key /sbin/e-smith/db dbfile settype key type /sbin/e-smith/db dbfile printprop key [prop1] [prop2] [prop3] ... /sbin/e-smith/db dbfile getprop key prop /sbin/e-smith/db dbfile setprop key prop1 val1 [prop2 val2] [prop3 val3] ... /sbin/e-smith/db dbfile delprop key prop1 [prop2] [prop3] ...
Only for the configuration database
you have a shortcut command only for the configuration database
db configuration
is
config
Note this only applies to this one often used database file, all others must be referred to using the format
db dbname xxxx yyyy zzzz
All database files are in
/home/e-smith/db
Auto completion
Like in every Linux shell you can use the TAB key when you use the command line to auto complete or propose all available answers
Examples
Here are a few examples to demonstrate usage and syntax correlation
db dbname show
Using real db names - for the database in /home/e-smith/db/configuration
db configuration show db configuration show |less db configuration keys |less
- An example for the imap service
[root@sme8dev64 ~]# db configuration show imap
imap=service ConcurrencyLimit=400 ConcurrencyLimitPerIP=12 TCPPort=143 access=private status=enabled
we can retrieve a value
[root@sme8dev64 ~]# db configuration getprop imap status
which gives something like
enabled
[root@sme8dev64 ~]# db configuration getprop dansguardian ConcurrencyLimitPerIP
which gives something like
12
Compare the above displayed actual element values of the db command with the syntax result from issuing the db command where each element or piece equates to:
Keys/Properties/values
db = command configuration = database name show = part of a command keys = part of a command imap = key status = property enabled = value ConcurrencyLimitPerIP = property 12 = value
Apply the above "reasoning" to any database and the the syntax presented by issuing db then makes sense.
Note that missing (or no) properties and values do not necessarily mean no value is in the /etc/file.conf system, as the template code can have a default value in the absence of a specific db value.
Note to determine what db settings are supported by sme code, or what the default values are, refer to (ie read) the code that is in the particular template or custom template associated with a /etc/file.conf
Look in /etc/e-smith/templates/... and /etc/e-smith/templates-custom/.... and subfolders and template fragments applicable to particular /etc/file.conf configuration files.
show all available databases
To show a list of existing databases do
cd /home/e-smith/db ls -al
which gives something like for official databases
total 304 -rw-r----- 1 root admin 1921 f�vr. 18 2014 accounts -rw-r--r-- 1 root admin 0 f�vr. 2 2013 backups -rw-r----- 1 root admin 8816 nov. 4 19:38 configuration -rw-r----- 1 root admin 361 f�vr. 2 2013 domains -rw-r----- 1 root admin 816 f�vr. 7 2013 hosts drwxr-x--- 2 root ldap 4096 f�vr. 22 2013 ldap -rw-r----- 1 root admin 3098 f�vr. 2 2013 mailpatterns drwxr-x--- 2 root root 4096 avril 27 2014 mysql drwxr-xr-x 2 root root 4096 nov. 3 21:42 navigation -rw-r----- 1 root admin 299 f�vr. 2 2013 networks -rw-r----- 1 root admin 0 mars 11 2010 portforward_tcp -rw-r----- 1 root admin 0 mars 11 2010 portforward_udp -rw-r----- 1 root admin 271 f�vr. 2 2013 spamassassin -rw-r--r-- 1 root root 201371 nov. 4 04:04 yum_available -rw-r--r-- 1 root root 37419 nov. 4 04:04 yum_installed -rw-r----- 1 root admin 4459 f�vr. 18 2014 yum_repositories -rw-r--r-- 1 root root 70 nov. 4 04:04 yum_updates
To show the keys for the two main databases do:
db configuration keys |more
That can be abbreviated to
config keys |more
db accounts keys |more
Note after using the |more switch, press Enter to scroll down a line at a time, or press Space to scroll down a page at a time
Create a db key
the generic command is :
/sbin/e-smith/db dbfile set key type [prop1 val1] [prop2 val2] ...
dbfile : choose the database in /home/e-smith/db key : the name of key type : generally 'service' or configuration but it can be other things as webbapps or url or ...
If you want to create a keys called 'plop' in the configuration database with a type as 'configuration you can do like this
db configuration set plop configuration Name wordpress PublicAccess private status enabled DbName wordpress DbUser wordpress WpLang en
you can see the result
config show plop
or
db configuration show plop=configuration DbName=wordpress DbUser=wordpress Name=wordpress PublicAccess=private WpLang=en status=enabled
References
See the Howto section for a couple of articles on db commands that should give useful info ie
http://wiki.contribs.org/DB_Variables_Configuration
and
http://wiki.contribs.org/Useful_Commands
and refer to the Developers Guide for technical information if needed
