Fail2ban
Fail2ban for SME Server
Maintainer
Daniel B.
Firewall Services
mailto:daniel@firewall-services.com
Please discuss, provide feedback and share epxeriences on the forums here
Description
Fail2ban operates by monitoring log files (e.g. /var/log/pwdfail, /var/log/auth.log, etc.) for selected entries and running scripts based on them. Most commonly this is used to block selected IP addresses that may belong to hosts that are trying to breach the system's security. It can ban any host IP that makes too many login attempts or performs any other unwanted action within a time frame defined by the administrator. Fail2ban is typically set up to unban a blocked host within a certain period, so as to not "lock out" any genuine connections that may have been temporarily misconfigured. However, an unban time of several minutes is usually enough to stop a network connection being flooded by malicious connections, as well as reducing the likelihood of a successful dictionary attack.
After installation the most important core services (and some additional ones) are monitored by default without the need for manual configuration (see: Services).
Requirements
This contrib has been developped and tested on SME Server 8 and later. It probably won't work on SME 7.
Installation sme8 and sme9
Configure Firewall-Services's repository:
db yum_repositories set fws repository \ BaseURL http://repo.firewall-services.com/centos/\$releasever \ EnableGroups no GPGCheck yes \ Name "Firewall Services" \ GPGKey http://repo.firewall-services.com/RPM-GPG-KEY \ Visible yes status disabled
Configure EPEL's repository:
For SME 8.x,
/sbin/e-smith/db yum_repositories set epel repository \ Name 'Epel - EL5' \ BaseUrl 'http://download.fedoraproject.org/pub/epel/5/$basearch' \ MirrorList 'http://mirrors.fedoraproject.org/mirrorlist?repo=epel-5&arch=$basearch' \ EnableGroups no \ GPGCheck yes \ GPGKey http://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL \ Visible no \ status disabled
For SME 9.x,
/sbin/e-smith/db yum_repositories set epel repository \ Name 'Epel - EL6' \ BaseUrl 'http://download.fedoraproject.org/pub/epel/6/$basearch' \ MirrorList 'http://mirrors.fedoraproject.org/mirrorlist?repo=epel-6&arch=$basearch' \ EnableGroups no \ GPGCheck yes \ GPGKey http://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL \ Visible no \ status disabled
signal-event yum-modify
- install the rpms
yum --enablerepo=fws --enablerepo=epel install smeserver-fail2ban
- Apply the needed configuration:
Use care to execute these three commands precisely. Failure to do so may prevent remote login via ssh.
db configuration setprop masq status enabled expand-template /etc/rc.d/init.d/masq /etc/init.d/masq restart signal-event fail2ban-conf
or, as an alternative, use the following commands. They will have the same effect after rebooting.
db configuration setprop masq status enabled signal-event post-upgrade; signal-event reboot
DB command
there is no panel yet you can manage the contrib by the db configuration, it is quite simple
# config show fail2ban fail2ban=service Mail=enabled status=enabled
Available options are below:
- IgnoreIP: a comma separated list of IP or CIDR networks which will never be blocked by fail2ban. Exemple: 12.15.22.4,17.20.0.0/16. All your local networks and networks allowed to access the server-manager are already automatically whitelisted
- FilterLocalNetworks can be enabled or disabled (default is disabled). If set to enabled, local networks won't be whitelisted, and fail2ban can also ban hosts from the internal networks. Note that networks allowed to access the server-manager are not affected (they will never be blocked)
- BanTime: Duration (in seconds) of a ban. Default to 1800
- FindTime: The window fail2ban will check, in seconds. Default is 900. So, this mean fail2ban will only check for the number of failed login attempts in the last 15 minuts
- MaxRetry: Number of failed attempts in the last FindTime seconds to trigger a ban. Default is 3
- Mail: can be enabled or disabled (default is enabled). If enabled, each ban will be notified by mail
- MailRecipient: if Mail is enabled, the email address which should receive ban notifications. Default is root (the admin account will receive)
After changing one of these settings, you need to apply it:
signal-event fail2ban-conf
for example :
config setprop fail2ban IgnoreIP 12.15.22.4,17.20.0.0/16 signal-event fail2ban-conf
Services
The following services are monitored out of the box, and fail2ban will ban client IP for BanTime if more than MaxRetry authentication failure occure in less than FindTime
- ssh
- dovecot (only on SME9, or if you run smeserver-dovecot)
- qpsmtpd. If a remote server send you too many mails which qpsmtpd rejects, it's probably spammer, so Fail2ban will blacklist it. MaxRetry is x3 for this service, so with the default config, a remote server will be blacklisted if 9 mails are rejected in less than 15 minutes
- httpd-e-smith. The standard http server. 3 different filters check apache logs:
- noscripts: check client which ask for scripts which are not available on your server. It's usually script-kiddies trying to exploit security vulerabilities
- scan: another set of filter for popular scans (phpMyAdmin, wp-login, admin area etc...)
- auth: will check for standard authentication failure
- pam. This will check a generic authentication failure. Everything which uses pam should work
- SOGo. Check SOGo logs for failed authentications
- LemonLDAP-NG. Check system logs for auth failure on LemonLDAP::NG portal
- ftp. Check auth failure on your FTP daemon
- Ejabberd. Check auth failure against EJabberd
Each filters will disable itself if the corresponding service is disabled. You can also disable specific filter if you want. For example, if you want to disable Apache filters:
db configuration setprop httpd-e-smith Fail2Ban disabled signal-event fail2ban-conf
Selective bans
Fail2Ban will do its best to do a selective ban. For example, if 3 auth failure against ssh are detected, only tcp port 22 (or any other port you choosed for SSH) will be blocked. Same for httpd-e-smith, SOGO, LemonLDAP::NG which will only blacklist tcp ports 80 and 443, qpsmtpd will block tcp ports 25 and 465, dovecot will block 143 and 993 etc...
There's only two ways to be completly locked (all port/protocol):
- pam. As this is a generic file, it's not possible to check which service was used when an auth failure occured, so the entire client IP will be blacklisted
- recidive. This is a special filter. It monitors fail2Ban logs, and blacklist client IP which gets locked several time. If a client is locked out 5 times in 24 hours, it'll be completly blacklisted for one full week
Use Fail2ban
List all jails
[root@sme8 ~]# fail2ban-client status Status |- Number of jail: 10 `- Jail list: http-overflows, http-noscript, http-auth, sogo, pam-generic, ssh-ddos, http-scan, ssh, qpsmtpd, recidive
List IP banned from a specific jail
[root@sme8 ~]# fail2ban-client status ssh
choose the specific jail with the command above which lists the Jail-list.
Example script which list How many ip are banned from all jails
nano /root/checklist_ban #!/bin/bash #lancer le script en sudo JAILS=$(fail2ban-client status | grep " Jail list:" | sed 's/`- Jail list://g' | sed 's/,//g') for j in $JAILS do echo "$j $(fail2ban-client status $j | grep " Currently banned:" | sed 's/ |- Currently banned:\t//g')" done
chmod 700 /root/checklist_ban
to launch the script, do the following command:
/root/checklist_ban
Unban an IP
In certain case you would to unban an IP immediately because you don't want waste time to wait the automatic IP unban process of fail2ban. In first you you have to find the specific jail which has blocked you IP, you can refer to the mail that the admin user has received or you can list a specific jail.
fail2ban-client status qpsmtpd
Status for the jail: qpsmtpd |- filter | |- File list: /var/log/qpsmtpd/current /var/log/sqpsmtpd/current | |- Currently failed: 5 | `- Total failed: 119 `- action |- Currently banned: 1 | `- IP list: 93.17.128.20 `- Total banned: 1
If you want to know all you active jail, then do :
fail2ban-client status
Therefore you have to play with this command to unban your IP
fail2ban-client set qpsmtpd unbanip 93.17.128.20
the generic command is :
fail2ban-client set JAIL unbanip MYIP
Jail.conf
The jail.conf is templated (/etc/e-smith/templates/etc/fail2ban/jail.conf) and the default file contains the configuration as below. You can add your own template of jail.conf at
/etc/e-smith/templates-custom/etc/fail2ban/jail.conf
if first time you need to create the folder for your custom template
mkdir -p /etc/e-smith/templates-custom/etc/fail2ban/jail.conf
and do this to expland templates
expand-template /etc/rc.d/init.d/masq /etc/init.d/masq restart signal-event fail2ban-conf
default jail.conf
[DEFAULT] ignoreip = 127.0.0.0/8 192.168.XXX.XXX 192.168.XXX.0/24 bantime = 1800 findtime = 900 maxretry = 3 usedns = yes backend = auto
[ssh] enabled = true filter = sshd logpath = /var/log/sshd/current action = smeserver-iptables[port="22",protocol=tcp,bantime=1800] smeserver-sendmail[name="SSH",dest=root]
[ssh-ddos] enabled = true filter = sshd-ddos logpath = /var/log/sshd/current action = smeserver-iptables[port="22",protocol=tcp,bantime=1800] smeserver-sendmail[name="SSH",dest=root]
[qpsmtpd] enabled = true filter = qpsmtpd logpath = /var/log/*qpsmtpd/current maxretry = 9 action = smeserver-iptables[port="25,465",protocol=tcp,bantime=1800] smeserver-sendmail[name="Qpsmtpd",dest=root]
[http-overflows] enabled = true filter = apache-overflows logpath = /var/log/httpd/error_log action = smeserver-iptables[port="80,443",protocol=tcp,bantime=1800] smeserver-sendmail[name="Apache (overflows)",dest=root]
[http-noscript] enabled = true filter = apache-noscript logpath = /var/log/httpd/error_log action = smeserver-iptables[port="80,443",protocol=tcp,bantime=1800] smeserver-sendmail[name="Apache (noscript)",dest=root]
[http-scan] enabled = true filter = apache-scan logpath = /var/log/httpd/error_log action = smeserver-iptables[port="80,443",protocol=tcp,bantime=1800] smeserver-sendmail[name="Apache (scan)",dest=root]
[http-auth] enabled = true filter = apache-auth logpath = /var/log/httpd/error_log action = smeserver-iptables[port="80,443",protocol=tcp,bantime=1800] smeserver-sendmail[name="Apache (auth)",dest=root]
[pam-generic] enabled = true filter = pam-generic logpath = /var/log/secure maxretry = 6 action = smeserver-iptables[bantime=1800] smeserver-sendmail[name="PAM generic",dest=root]
[recidive] enabled = true filter = recidive logpath = /var/log/fail2ban/daemon.log bantime = 604800 findtime = 86400 maxretry = 5 backend = polling action = smeserver-iptables[bantime=604800] smeserver-sendmail[name="Recidive",dest=root]
Uninstall
yum remove smeserver-fail2ban fail2ban
Bugs
Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-fail2ban component or use this link .
Below is an overview of the current issues for this contrib:
ID | Product | Version | Status | Summary (12 tasks) ⇒ |
---|---|---|---|---|
12453 | SME Contribs | 10.0 | CONFIRMED | extra coma leading to empty string fails ignore ip template fragment |
12402 | SME Contribs | 10.0 | UNCONFIRMED | Using smeserver-git makes smeserver-fail2ban ban even though whitelisted. |
12285 | SME Contribs | 10.0 | UNCONFIRMED | WARNING message in daemon log after reboot about ssh |
12199 | SME Contribs | 10.0 | CONFIRMED | add externalip /internal ip to whitelist |
11805 | SME Contribs | 10.0 | CONFIRMED | NFR: use fail2ban db to list banned host |
11801 | SME Contribs | 10.0 | CONFIRMED | NFR: add a permanent/custom or manual jail |
10799 | SME Contribs | Futur | CONFIRMED | NFR: Fail2ban OpenVPN routed templates |
10798 | SME Contribs | 9.2 | CONFIRMED | NFR convert long mask to bit mask if entered as long mask |
10786 | SME Contribs | 9.2 | CONFIRMED | lockout without a full masq restart |
10638 | SME Contribs | 9.2 | CONFIRMED | IgnoreIP entry created with trailing slash stopping f2b from working |
10422 | SME Contribs | 9.2 | UNCONFIRMED | NFR: portscan jail |
8955 | SME Contribs | 9.2 | UNCONFIRMED | Fail2Ban error in qpsmtpd.conf regex |
User contributions
Testing new regex
You can test new regex - notes from here http://bugs.contribs.org/show_bug.cgi?id=8955
fail2ban-regex [LOG] [REGEX]
You can also test the actual conf files as follows
fail2ban-regex /var/log/qpsmtpd/current /etc/fail2ban/filter.d/qpsmtpd.conf
Note that some characters such as ` may need escaping on the command line like this \` but do not need escaping in the conf files
e.g From qpsmptd.conf file this works in the conf file
^\s*\d+\s*logging::logterse plugin \(deny\): ` <HOST>\s*.*90\d.*msg denied before queued$
However, on the command line it needs writing like this
^\s*\d+\s*logging::logterse plugin \(deny\): \` <HOST>\s*.*90\d.*msg denied before queued$
Show IPs banned by service
Check the fail2ban log
Here is another quick script that shows you the most recent IPs banned in the logs. Note that they may have been unbanned but there is no check for this.
mkdir /root/bin nano -w /root/bin/IP_list.sh
and copy and paste the below code into the file:
#!/bin/sh # Set CLI vars to something we can read TYPE=$1 LOG=$2 # Set main grep string SEARCH="Ban ((1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])\.){3}(1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])" # Add the search term SEARCH="\[$TYPE]\ $SEARCH" # Now search the log grep -oE "\[$TYPE\] Ban ((1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])\.){3}(1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])" $LOG
Save the file and make it executable:
chmod 755 /root/bin/IP_list.sh
Usage :
IP_list.sh [service] [log]
e.g.
IP_list.sh qpsmtpd /var/log/fail2ban/daemon.log
Check the fail2ban banned IP for all active jails
by Unnilennium (talk)
mkdir /root/bin vim /root/bin/sfail2ban
paste this in it:
#!/bin/bash for SERVI in $(fail2ban-client status|grep 'Jail list'|cut -d':' -f2|sed 's/, / /g'| sed -e 's/^[ \t]*//') do fail2ban-client status $SERVI |grep -E 'IP list|Status for the jail' done
then do
chmod 755 /root/bin/sfail2ban
Usage :
sfail2ban
output:
# sfail2ban Status for the jail: ftp `- Banned IP list: Status for the jail: http-auth `- Banned IP list: Status for the jail: http-badbots `- Banned IP list: Status for the jail: http-fakegooglebot `- Banned IP list: Status for the jail: http-noscript `- Banned IP list: Status for the jail: http-overflows `- Banned IP list: Status for the jail: http-scan `- Banned IP list: Status for the jail: http-shellshock `- Banned IP list: Status for the jail: imap `- Banned IP list: Status for the jail: pam-generic `- Banned IP list: Status for the jail: qpsmtpd `- Banned IP list: Status for the jail: recidive `- Banned IP list: Status for the jail: ssh `- Banned IP list: Status for the jail: ssh-ddos `- Banned IP list: