User talk:Stephdl

http://wiki.contribs.org/SME_Server:Documentation:QA:Verification

in the directory where you want to work

mkdir transmission
cd transmission

then we need to install all the following files, you have to adjust with your cpu architecture

wget http://geekery.altervista.org/geekery/el5/i386/libevent2-2.0.10-1geekery.i386.rpm
wget http://geekery.altervista.org/geekery/el5/i386/transmission-2.76-1geekery.i386.rpm
wget http://geekery.altervista.org/geekery/el5/i386/transmission-common-2.76-1geekery.i386.rpm
wget http://geekery.altervista.org/geekery/el5/i386/transmission-daemon-2.76-1geekery.i386.rpm
wget http://geekery.altervista.org/geekery/el5/i386/transmission-cli-2.76-1geekery.i386.rpm

or

wget http://geekery.altervista.org/geekery/el5/x86_64/libevent2-2.0.10-1geekery.x86_64.rpm
wget http://geekery.altervista.org/geekery/el5/x86_64/transmission-2.76-1geekery.x86_64.rpm
wget http://geekery.altervista.org/geekery/el5/x86_64/transmission-common-2.76-1geekery.x86_64.rpm
wget http://geekery.altervista.org/geekery/el5/x86_64/transmission-daemon-2.76-1geekery.x86_64.rpm
wget http://geekery.altervista.org/geekery/el5/x86_64/transmission-cli-2.76-1geekery.x86_64.rpm

the root user can install rpm above

yum local install *

	Note:
	we must stop the deamon before every manual modifications of setting.json

/etc/init.d/transmission-daemon stop
nano /var/lib/transmission/settings.json

allow your network range to connect to the transmission-deamon "*" can be used as a wild card

"rpc-whitelist": "127.0.0.1,192.168.1.*",
"rpc-whitelist-enabled": true,

we can launch the deamon

/etc/init.d/transmission-daemon start

by default the transmission-deamon use the 51413 port for sharing with other computer so we have to authorize it in the sme firewall and after you may need to allow it in the nat configuration of your router if the upnp configuration does'nt work.

db configuration set transmission-daemon service
db configuration setprop transmission-daemon TCPPort 51413
db configuration setprop transmission-daemon status enabled
db configuration setprop transmission-daemon access public

if you restart your computer you can experiment that the service is not started because there is no link to rc.7d, so you have to do this command line to allow transmission deamon operate in runlevel 7.

ln -s /etc/init.d/transmission-daemon /etc/rc.d/rc7.d/S99transmission-daemon