User talk:Calisun

From SME Server
Revision as of 17:43, 28 September 2012 by Calisun (talk | contribs)
Jump to navigation Jump to search

Following Step-by-Step instructions are for installing wordpress in an i-Bay of SME 8.x

(tested on 8b6) 

 Notice: When installing ANY web application in an iBay of the SME server that has additional user access, besides
 admin, there is always a danger of other users changing (intentionally or accidentally) files in the    
 application iBay. If there is a possible security issue with users, it is recommended to install wordpress 
 contribution from here: http://wiki.contribs.org/Category:Contrib
       If there is no user security issue, or the server only has admin access, you may continue.


== PART ONE: ==


---Before installing Wordpress:

---THIS NEEDS TO BE DONE ONLY ONCE ON A NEW SYSTEM:---

Any subsequent wordpress installs, go to the Second Part.


This step is not necessary, you can do it if you need to upload files/ pictures larger than the default settings in php.

(Wordpress also has its own user upload limit settings, which need to be changed in wordpress dashboard, separately from PHP settings)

(Below can be done again if for some reason values need to be changed) 


   db configuration setprop php MemoryLimit 128M
   db configuration setprop php PostMaxSize 112M
   db configuration setprop php UploadMaxFilesize 96M
   expand-template /etc/php.ini 
   sv t httpd-e-smith

Sidenote: To see how to change file size limits for other aplications, see here: [1]


== PART TWO: ==


---Wordpress install in an iBay of SME server:


1) Create an iBay in which you wish to install wordpress on.

When creating the iBay in server-manager:

  • - Change the group from Admin to everyone. - This will allow users to create blogs and post pictures without having permission issues.
  • - Change User access to Write=group, Read=everyone
  • - Under Public access via web, choose Entire internet without password.
  • - Enable Execution of dynamic content.


2) Issue a following command to enable PHP temporary upload folder in that iBay .(Change "iBay" to the name of your ibay and remove quote marks) 


   db accounts setprop "iBay" PHPBaseDir /home/e-smith/files/ibays/"iBay":/tmp
   signal-event ibay-modify "iBay"

Sidenote, the above command should work for most everybody, but if for some reason it does not work for you, see this: [2]


3) Issue a following command to enable Symlinks in that iBay .(Change "iBay" to the name of your ibay and remove quote marks) 


   db accounts setprop "iBay" AllowOverride all
   db accounts setprop "iBay" FollowSymLinks enabled
   db accounts setprop "iBay" Indexes disabled
   signal-event ibay-modify "iBay"


4) Create mysql database and database user for wordpress to use. Make sure database user has all the privileges to the database you have created. For security reasons, allow access to the database from localhost only.


5) Download latest version from www.wordpress.org to your computer and unzip it. Upload unzipped wordpress to desired ibay/html


6) In the SME admin panel, point the correct domain to this new iBay.


7) Point your web browser to your domain and go through the installation process.



**** If you want to have a single blog (personal blog) on one domain, you are done.



-+-+-+ To enable Multisite: -+-+-+ ''


1) Open wp-config.php and add the folowing code: 


   define('WP_ALLOW_MULTISITE', true);


- just above 


   define('DB_NAME', .....


2) Log into your wordpress Dashboard

Under: Tools, Network


Choose desired settings and click on Install

  • NOTE- SME Server does not support Wildcard Subdomains, until someone is able to figure out how to create a custom template for Wildcard Subdomains (See this thread for possible answer)[3] until such time, you must choose Subfolder


3) After you click install, you will be taken to a "Create a Network of WordPress Sites" screen

Make sure you follow ALL 3 steps.


4) SME Server specific change:

!! My Wordpress installation works fine without this step. But if you have issues after following all the steps above, try it to see if it helps. This was suggested by forum users here: [4]


in the .htaccess file change from: 


   RewriteEngine On
   RewriteBase /


to: 


   RewriteEngine On
   RewriteBase /"ibay"



**** If you are planning to run several blogs under one domain, than you are done.


-+-+-+ To run several Domains on one wordpress install: -+-+-+''


1) you will need to install Wordpress Domain Mapping plugin.

Find it here: [5]

Just follow installation instructions from the plugin download site.


2) Create all your domains in the server-manager and point them to the iBay where you installed wordpress.

3) create new site in wordpress that will handle new domain created in step 2

SME Specific Change:

SME Server has issues displaying images inside blogs that use Domain mapping, in order for the images to show correctly, we need to create custom template to enable allow_url_fopen and create custom template for "hosts" file:


+=+= BELOW INFORMATION IS STILL WORK IN PROGRESS AS I TRY TO FIGURE OUT THE IMAGE ISSUE. I WILL REMOVE THIS NOTICE ONCE THE ISSUE IS FIXED, BUT AS OF RIGHT NOW, USE THE BELOW INFORMATION AT YOUR OWN RISK +=+=


3) Allow PHP URL File Open per ibay:

Make custom httpd directory if it does not exist 

  mkdir -p /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf


Inside that directory create a file 

  99allow_url_fopen

Edit the file 99allow_url_fopen and input following content: (Change "iBay" to the name of your ibay and remove quote marks) 



  <Directory /home/e-smith/files/ibays/"iBay"/html>
  php_admin_flag allow_url_fopen on
  </Directory>

Save the file

Expand 

  expand-template /etc/httpd/conf/httpd.conf

Restart httpd. 

  /etc/init.d/httpd-e-smith restart


3) Create directory: 

  /etc/e-smith/templates-custom/etc/hosts,

then inside that directory create a file : 

  30customhosts,

Edit the file 30customhosts and add your domains to it that will use wordpress domain mapping (replace domain# with your actual domain names) 

  127.0.0.1   *.domain1.com
  127.0.0.1   *.domain2.com
  127.0.0.1   *.domain3.com


Save the file

Expand: 

  expand-template /etc/hosts

Restart httpd: 

  /etc/init.d/httpd-e-smith restart



Good Luck

And have fun with your new Wordpress install.

Retrieved from "https://wiki.koozali.org/index.php?title=User_talk:Calisun&oldid=16606"