Talk:SANE

use templates not templates-custom

create a smeserver-sane with the templates. see smeserver-hylaFax for an example

Yes, I looked...

create a smeserver-sane with the templates: I don't have a lot of time at present

If I have a little of time...

I must finish the installation of mgetty / vgetty for SME before

good work so far, I'm dusting off my old scanner...

What Manufacturer and Model?

sane-find-scanner

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0305 [Hewlett-Packard ScanJet 4300C]) at libusb:002:003

and lsusb > Bus 002 Device 003: ID 03f0:0305 Hewlett-Packard ScanJet 4300c

but scanimage -L > No scanners were identified.

documentation suggest this may not be a problem if i can supply my device name

could you suggest what the syntax might be ?

http://www.sane-project.org/sane-mfgs.html#Z-HEWLETT-PACKARD > niash driver

My son has the same scanner.

It works very well at him with my rpm

At first, I compiled sane for the scanner of my son and since, several persons asked me for my rpm to be able to use sane with SME

Did you use my rpm or that of centos?

Ecureuil

View sane documentation: service = sane-port => grrrrrrrrrrrrrrr

don't take offense, that is the nature of wiki, just make the change and if someone is wrong change it back with an explaination, which is what you do Snoble 19:59, 4 April 2008 (MDT)

Cactus did not ask me for my opinion before changing the howto

I would have liked well that he makes it before writing stupidity

Ecureuil