Difference between revisions of "Monitor Disk Health"
From SME Server
Jump to navigationJump to search (smartd) |
m |
||
| Line 16: | Line 16: | ||
http://www.linuxmanpages.com/man8/smartd.8.php <br> | http://www.linuxmanpages.com/man8/smartd.8.php <br> | ||
http://www.captain.at/howto-linux-smartmontools-smartctl.php | http://www.captain.at/howto-linux-smartmontools-smartctl.php | ||
| + | |||
| + | <noinclude>[[Category:Howto]]</noinclude> | ||
Revision as of 11:55, 5 March 2008
Monitor Disk Health
Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.
To enable
config setprop smartd status enabled
To manually check disks
Generate report
smartctl -t short /dev/hdc (1 minute) smartctl -t long /dev/hdc (1 hour)
View report
smartctl -a /dev/hdc
http://www.linuxmanpages.com/man8/smartd.8.php
http://www.captain.at/howto-linux-smartmontools-smartctl.php
