PHP

Starting SME10 php module is not used anymore for httpd. Instead we rely on php-fpm for every available version of php.

By default we provide the following versions:

• 54 (maintained by Red-Hat up to CentOS 7 EOL: 30 Jun 2024),
• 55,56,70,71,72 (unsupported),
• 73 (supported up to 6 Dec 2021),
• 74 (supported up to 28 Nov 2022),
• 80 (supported up to 26 Nov 2023).

Available db keys to handle php configuration and services

First you need to decide if you want to alter the php behaviour for an ibay or for a specific php version, of for all php versions.

db configuration properties

keys	role
php	customization of /etc/php.ini	for php54
php55	customization of /opt/remi/php55/root/etc/php.ini	if no properties defined, will use php keys properties
php56	customization of /opt/remi/php56/root/etc/php.ini
php70	customization of /etc/opt/remi/php70/php.ini
php71	customization of /etc/opt/remi/php71/php.ini
php72	customization of /etc/opt/remi/php72/php.ini
php73	customization of /etc/opt/remi/php73/php.ini
php74	customization of /etc/opt/remi/php74/php.ini
php80	customization of /etc/opt/remi/php80/php.ini

Every version of php has its own php-fpm service running, the related configuration db entry is php-fpm for php (ie php54), php55-php-fpm for php55 and so on. If you really want to disable one version of php, here what you need to do for php55 as an example:

config setprop php55-php-fpm status disabled
signal-event webapps-update

Available properties

Here is a list of available properties to configure php. You have to choose at which level you want to handle the change.

• Do you want the change for the whole server, then probably choose to change it for key php): db configuration setprop php ...
• Do you want the change for a specific version of php, then you should probably do it against a specific php key e.g. : db configuration setprop php74 ...
• Do you want to apply the change for a specific ibay, this is what we suggest you to do in most cases: db accounts setprop myibay ..

php setting	ibay property	php.ini property	default	note
-	PHPVersion	-	74	can vary upon update if left empty
allow_url_fopen	AllowUrlfOpen	AllowUrlFopen	off	unsecure keep to off
allow_url_include	-	-	off
auto_prepend_file	AutoPrependFile	-	enabled	/usr/share/php/auth_translation.php unless disabled
disable_functions	DisabledFunctions	-	system,show_source, symlink,exec,dl,shell_exec,passthru,phpinfo,escapeshellarg,escapeshellcmd
display_errors	DisplayErrors	-	off
error_log	-	-	/var/log/php/$key/error.log
error_reporting	ErrorReporting	-	E_ALL & ~E_NOTICE & ~E_DEPRECATED & ~E_STRICT
expose_php	-	ExposePHP	Off
file_upload	FileUpload	-	Off
mail.add_x_header	-	MailAddXHeader	disabled	only global, not per php version
mail.force_extra_parameters	MailForceSender	MailForceSender	root@$DomainName	ibayname@$DomainName for ibays
mail.log	-	MailLog	disabled
max_execution_time	MaxExecutionTime	MaxExecutionTime	30
max_file_uploads	-	MaxFileUpload	20
max_input_time	MaxInputTime	MaxInputTime	60
memory_limit	MemoryLimit	MemoryLimit	128M
open_basedir	PHPBaseDir	-	/home/e-smith/files/ibays/IBAYNAME/:/var/lib/php/IBAYNAME/:/usr/share/php/:/usr/share/pear/:/opt/remi/php$version/root/usr/share/pear/:/opt/remi/php$version/root/usr/share/php/
post_max_size	PostMaxSize	PostMaxSize	20M
security.limit_extensions	AllowPHTML		disabled	allow php to interprete more file (.php .htm .html .phar .phtml .xml)
sendmail_from	-	MailForceSender	root@$DomainName
sendmail_path	-	SendmailPath	/usr/sbin/sendmail -t -i
short_open_tag	-	ShortOpenTag	On
upload_max_filesize	UploadMaxFilesize	UploadMaxFilesize	10M

if you want to set a specific value for an ibay, here we use php80 for ibay MYIBAY and avoid to have any disabled function:

db accounts setprop MYIBAY disable_functions none PHPVersion 80
signal-event webapps-update

	Note:
	It is highly suggested to install smeserver-webhosting contrib to set your ibay php values from the server-manager. Everything is available and it prevent you from doing any mistake.

Display Error Messages

By default PHP does not display error messages on screen. Some times you get a blank page when executing PHP scripts. Usually some sort of error has occurred, but this error text will not be displayed as SME Server is configured to not display them. Instead the error messages are reported to the log files of the webserver and the general logfile of the server.

Try to analyze your logfiles: /var/log/httpd/error_log and /var/log/httpd/access_log and perhaps also /var/log/messages.

	Warning:
	It is strongly advised to disable display errors after you have tracked and solved the problem, as the displayed error message might provide information (like filesystem layout) that only should be known to the system administrators and not to users, let alone people with bad intentions.

Enable changes for all php versions

If you (for debugging purposes for instance) would like to enable it you can do it with the instructions found below:

mkdir -p /etc/e-smith/templates-custom/etc/php.ini
cp /etc/e-smith/templates/etc/php.ini/30ErrorHandling /etc/e-smith/templates-custom/etc/php.ini

After that:

cd /etc/e-smith/templates-custom/etc/php.ini
pico 30ErrorHandling

Modify the second line to read:

display_errors          = On

After that issue the following commands:

expand-template /etc/php.ini

Depending on your server version use the proper command to restart your webbrowser.

SME Server 7 and newer:

sv t httpd-e-smith

older releases:

/etc/rc7.d/S86httpd-e-smith restart

Now access your page again and see what the error is.

Undo Changes

If everything works you remove the 30ErrorHandling file from the /etc/e-smith/templates-custom/etc/php.ini folder and issue the last two lines again:

expand-template /etc/php.ini
/etc/rc7.d/S86httpd-e-smith restart

Enable changes for a specific ibay

Starting SME10 and smeserver-php-3.0.0-39

db accounts setprop MYIBAY DisplayErrors enabled 
signal-event webapps-update

Open basedir restriction

SME Server has a security measure in place which is called 'open basedir restriction'. This measure prevents PHP from executing or invoking other PHP scripts outside the scope of it's own tree in other words it creates a 'sandbox' or 'jail'. Overall configuration is defined in the php.ini file but you can add an override on a per ibay basis.

Error message

The PHP open basedir restriction usually present to the user like this in the /var/log/messages file:

Aug 12 17:27:42 homer httpd: PHP Warning:  main(): open_basedir restriction in effect. File(/tmp/test.php) is not within the allowed path(s): (/home/e-smith/files/ibays/Primary/html/) in /home/e-smith/files/ibays/Primary/html/test.php on line 2

In general you will find this message in the log files only as by default PHP is configured to prevent the display of error messages to the end users. This can be changed as per this HowTo.

Modifying the PHPBaseDir setting for an ibay

(Please also see: these instructions on the Useful_Commands page.)
1. Open a SME Server shell as root user and document the current setting of the PHPBaseDir directive by writing down the output of the following command: db accounts getprop ibayname PHPBaseDir Be careful to write it down to the letter as we need it in the next step For the Primary ibay the ouptut of above command would normally look like this: /home/e-smith/files/ibays/Primary/html/
2. Decide on what directory you would like to add and issue the following: db accounts setprop ibayname PHPBaseDir value Replace ibayname with the name of the ibay and value with the old value for the PHPBaseDir directive you have written down and a colon (:) followed by the full path to the directory you would like to add with a tailing slash (/), e.g. db accounts setprop Primary PHPBaseDir /home/e-smith/files/ibays/Primary/html/:/opt/gallery2/ Above command would allow for invocation of scripts in the /opt/gallery2 path from the Primary ibay html folder by PHP. To allow uploading of files to via http to a ibay name wiki db accounts setprop wiki PHPBaseDir /home/e-smith/files/ibays/wiki/:/tmp/
3. After defining the new setting we need to reflect the change in the configuration file of the web server and have the web server reload it's configuration file. This is done by issuing the following command: signal-event ibay-modify ibayname Be sure to replace ibayname with the name of the ibay you have just modified.

Upload_tmp_dir

upload_tmp_dir

From SME Server V8 up to SME Server V9, you could have sometime an error thrown by PHP and you will need to specify a temporary directory (e.g. upload_tmp_dir) which is not set in php.ini. see bugzilla:6650 and bugzilla:7652. Many Php applications needs this setting, most of known are wordpress, roudcube, egroupware, etc. Symptoms are that you can't upload contents to the PHP application.

An easy way is to make a Custom Template to resolve this issue. see Uploadtmpdir

---