Difference between revisions of "SME-101.03 ADSL/VDSL, DDNS et Domaine FQDN"

(FAI)

# ping 192.168.1.149

192.168.1.149 is alive

# su - admin

# ifconfig

eth0      Link encap:Ethernet  HWaddr 00:E0:29:76:62:61
          inet adr:192.168.1.1  Bcast:192.168.1.255  Masque:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
...
ppp0      Link encap:Protocole Point-à-Point
          inet adr:206.248.138.152  P-t-P:206.248.154.121  Masque:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:1411029 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1511627 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:3
          RX bytes:146838578 (140.0 MiB)  TX bytes:4131874 (3.9 MiB)

# ping -c 2 google.com

PING google.com (74.125.226.98) 56(84) bytes of data.
64 bytes from yyz08s13-in-f2.1e100.net (74.125.226.98): icmp_seq=1 ttl=59 time=23.9 ms
64 bytes from yyz08s13-in-f2.1e100.net (74.125.226.98): icmp_seq=2 ttl=59 time=24.5 ms

--- google.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1025ms
rtt min/avg/max/mdev = 23.993/24.277/24.561/0.284 ms

db yum_repositories set stephdl repository \
BaseURL http://mirror.de-labrusse.fr/smeserver/\$releasever \
EnableGroups no GPGCheck yes \
Name "Mirror de Labrusse" \
GPGKey http://mirror.de-labrusse.fr/RPM-GPG-KEY \
Visible yes status disabled

# signal-event yum-modify

# yum install -y --enablerepo=smecontribs smeserver-ddclient

...
Installation de     2 paquet(s)

Taille totale des téléchargements : 110 k
Taille d'installation : 475 k
...
  Verifying     : smeserver-ddclient-1.2.1-9.el6.sme.noarch                             1/2
  Verifying     : ddclient-3.8.3-3.el6.sme.noarch                                       2/2

Installé:
  smeserver-ddclient.noarch 0:1.2.1-9.el6.sme

Dépendance(s) installée(s) :
  ddclient.noarch 0:3.8.3-3.el6.sme

Terminé !

==============================================================
WARNING: You now need to run BOTH of the following commands
to ensure consistent system state:

signal-event post-upgrade; signal-event reboot

You should run these commands unless you are certain that
yum made no changes to your system.
==============================================================

# signal-event post-upgrade; signal-event reboot

Broadcast message from root@sme-9
        (/dev/pts/0) at 16:20 ...

The system is going down for reboot NOW!

# config setprop ddclient urlcheckip ip.changeip.com

# config setprop ddclient DeamonUpdate 180

# signal-event ddclient

# config show ddclient

ddclient=service
    DeamonUpdate=180
    SSL=yes
    status=enabled
    urlcheckip=ip.changeip.com

#  yum remove -y smeserver-ddclient

...
Suppression de     1 paquet(s)

Taille d'installation : 278 k
...
Supprimé:
  smeserver-ddclient.noarch 0:1.2.1-9.el6.sme

Terminé !

==============================================================
WARNING: You now need to run BOTH of the following commands
to ensure consistent system state:

signal-event post-upgrade; signal-event reboot

You should run these commands unless you are certain that
yum made no changes to your system.
==============================================================

# signal-event post-upgrade ; signal-event reboot

# rpm -qa | grep smeserver-ddclient

# mkdir /temp

# cd /temp

# pwd

/temp

# yum -y install gcc

...
Installation de     6 paquet(s)

Taille totale des téléchargements : 15 M
Taille d'installation : 33 M
...
  Installation  : cpp-4.4.7-18.el6_9.2.x86_64                                           4/6
  Installation  : libgomp-4.4.7-18.el6_9.2.x86_64                                       5/6
  Installation  : gcc-4.4.7-18.el6_9.2.x86_64                                           6/6
...
Installé:
  cpp.x86_64 0:4.4.7-18.el6_9.2
...
Terminé !

# pwd

/temp

# wget http://www.no-ip.com/client/linux/noip-duc-linux.tar.gz

--2018-03-23 17:29:10--  http://www.no-ip.com/client/linux/noip-duc-linux.tar.gz
Résolution de www.no-ip.com... 8.23.224.110
Connexion vers www.no-ip.com|8.23.224.110|:80...connecté.
requête HTTP transmise, en attente de la réponse...301 Moved Permanently
Emplacement: http://www.noip.com/client/linux/noip-duc-linux.tar.gz [suivant]
--2018-03-23 17:29:11--  http://www.noip.com/client/linux/noip-duc-linux.tar.gz
Résolution de www.noip.com... 8.23.224.107
Connexion vers www.noip.com|8.23.224.107|:80...connecté.
requête HTTP transmise, en attente de la réponse...200 OK
Longueur: 134188 (131K) [application/x-gzip]
Sauvegarde en : «noip-duc-linux.tar.gz»

100%[==================================================>] 134 188      348K/s   ds 0,4s

2018-03-23 17:29:12 (348 KB/s) - «noip-duc-linux.tar.gz» sauvegardé [134188/134188]

# tar -zxvf noip-duc-linux.tar.gz

./._noip-2.1.9-1
noip-2.1.9-1/
noip-2.1.9-1/._binaries
noip-2.1.9-1/binaries/
...
noip-2.1.9-1/README.FIRST_PT
noip-2.1.9-1/._redhat.noip.sh
noip-2.1.9-1/redhat.noip.sh

# ls -als

total 148
  4 drwxr-xr-x  3 root root    4096 23 mars  17:30 .
  4 dr-xr-xr-x 35 root root    4096 23 mars  17:16 ..
  4 -rwxr-xr-x  1  501 games    205 25 nov.   2008 ._noip-2.1.9-1
  4 drwxr-xr-x  3  501 games   4096 25 nov.   2008 noip-2.1.9-1
132 -rw-r--r--  1 root root  134188 20 déc.  19:43 noip-duc-linux.tar.gz

# cd noip-2.1.9-1

# make

gcc -Wall -g -Dlinux -DPREFIX=\"/usr/local\" noip2.c -o noip2

# ifconfig

eth0      Link encap:Ethernet  HWaddr 08:00:27:AA:B4:36
          inet adr:10.10.1.1  Bcast:10.10.1.255  Masque:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12424 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14628 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:1289877 (1.2 MiB)  TX bytes:15448982 (14.7 MiB)

eth1      Link encap:Ethernet  HWaddr 08:00:27:05:18:02
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:21798 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24292 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:15957823 (15.2 MiB)  TX bytes:23287704 (22.2 MiB)
          Interruption:20 Mémoire:e0400000-e0420000

lo        Link encap:Boucle locale
          inet adr:127.0.0.1  Masque:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1332 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1332 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:173833 (169.7 KiB)  TX bytes:173833 (169.7 KiB)

ppp0      Link encap:Protocole Point-à-Point
          inet adr:206.248.138.152  P-t-P:206.248.155.241  Masque:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:21451 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24171 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:3
          RX bytes:15352074 (14.6 MiB)  TX bytes:22651351 (21.6 MiB)

# make install

if [ ! -d /usr/local/bin ]; then mkdir -p /usr/local/bin;fi
if [ ! -d /usr/local/etc ]; then mkdir -p /usr/local/etc;fi
cp noip2 /usr/local/bin/noip2
/usr/local/bin/noip2 -C -c /tmp/no-ip2.conf

Auto configuration for Linux client of no-ip.com.

Multiple network devices have been detected.

Please select the Internet interface from this list.

By typing the number associated with it.
0       eth0
1       eth1 
1
Please enter the login/email string for no-ip.com  generaltoto@toto.com
Please enter the password for user 'generaltoto@toto.com'  **********

[[Image:]]3 hosts are registered to this account.
Do you wish to have them all updated?[N] (y/N)  y 
Please enter an update interval:[30]  [RETOUR]
Do you wish to run something at successful update?[N] (y/N)  N

New configuration file '/tmp/no-ip2.conf' created.

mv /tmp/no-ip2.conf /usr/local/etc/no-ip2.conf

# ls -als /usr/local/etc/no-ip2.conf

4 -rw------- 1 root root 232 23 mars  17:33 /usr/local/etc/no-ip2.conf

# cat /usr/local/etc/no-ip2.conf

0.0.0.0▒(L2JA2eth2dXNlcm2hbWU9bWwjaGVsYW6kcmU2NDBtaWwyb22hdG9yMl2xZyZwYXNzPXJvYm0xMjA0NDkmaFtdPWFpbmVzc2Fuc2ZpbC5uby1pcC5vcmc=

# which noip2

/usr/local/bin/noip2

# echo '/usr/local/bin/noip2' >> /etc/rc.local

# cat /etc/rc.local

#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local
/usr/local/bin/noip2

# signal-event post-upgrade ; signal-event reboot

# ps aux |grep noip

nobody    2321  0.0  0.0  10440   896 ?        Ss   17:38   0:00 /usr/local/bin/noip2
root      2516  0.0  0.0 103344   884 pts/0    S+   17:39   0:00 grep noip

# yum install -y lynx

...
Installation de     2 paquet(s)
...
(1/2): centos-indexhtml-6-2.el6.centos.noarch.rpm                    |  91 kB     00:00
(2/2): lynx-2.8.6-27.el6.x86_64.rpm                                  | 1.3 MB     00:01
...
Installé:
  lynx.x86_64 0:2.8.6-27.el6

Dépendance(s) installée(s) :
  centos-indexhtml.noarch 0:6-2.el6.centos

Terminé !

# lynx ip.changeip.com

# /usr/local/bin/noip2 --help

/usr/local/bin/noip2: invalid option -- '-'

USAGE: noip2 [ -C [ -F][ -Y][ -U #min]
        [ -u username][ -p password][ -x progname]]
        [ -c file][ -d][ -D pid][ -i addr][ -S][ -M][ -h]

Version Linux-2.1.9
Options: -C               create configuration data
         -F               force NAT off
         -Y               select all hosts/groups
         -U minutes       set update interval
         -u username      use supplied username
         -p password      use supplied password
         -x executable    use supplied executable
         -c config_file   use alternate data path
         -d               increase debug verbosity
         -D processID     toggle debug flag for PID
         -i IPaddress     use supplied address
         -I interface     use supplied interface
         -S               show configuration data
         -M               permit multiple instances
         -K processID     terminate instance PID
         -z               activate shm dump code
         -h               help (this text)

# /usr/local/bin/noip2 -C

Configuration file '/usr/local/etc/no-ip2.conf' is in use by process 2783.
Ending!

# ps aux |grep noip2

nobody    2783  0.0  0.0  10440   892 ?        Ss   22:01   0:00 /usr/local/bin/noip2
root      2786  0.0  0.0 103340   876 pts/0    S+   22:02   0:00 grep noip

# /usr/local/bin/noip2 -K 2783

Process 2783 terminated.

# /usr/local/bin/noip2 -C

if [ ! -d /usr/local/bin ]; then mkdir -p /usr/local/bin;fi
if [ ! -d /usr/local/etc ]; then mkdir -p /usr/local/etc;fi
cp noip2 /usr/local/bin/noip2
/usr/local/bin/noip2 -C -c /tmp/no-ip2.conf

Auto configuration for Linux client of no-ip.com.

Multiple network devices have been detected.

Please select the Internet interface from this list.

By typing the number associated with it.
0       eth0
1       eth1 
1
Please enter the login/email string for no-ip.com  generaltoto@toto.com
Please enter the password for user 'generaltoto@toto.com'  **********

[[Image:]]3 hosts are registered to this account.
Do you wish to have them all updated?[N] (y/N)  y 
Please enter an update interval:[30]  [RETOUR]
Do you wish to run something at successful update?[N] (y/N)  N

New configuration file '/tmp/no-ip2.conf' created.

mv /tmp/no-ip2.conf /usr/local/etc/no-ip2.conf

# signal-event post-upgrade ; signal-event reboot

# ps aux | grep noip2

nobody    2216  0.0  0.0  10440   896 ?        Ss   22:18   0:00 /usr/local/bin/noip2
root      2279  0.0  0.0 103344   884 pts/0    S+   22:19   0:00 grep noip2

# date

ven. mars 23 22:33:13 EDT 2018

# cat /var/log/messages | grep noip

...
Mar 23 22:03:58 tuteurweb noip2[2783]: v2.1.9 daemon ended.
Mar 23 22:18:44 tuteurweb noip2[2216]: v2.1.9 daemon started with NAT enabled
Mar 23 22:18:45 tuteurweb noip2[2216]: micronator-101.ddns.net was already set to 206.248.138.152

# rpm -e gcc

# rpm -qa | egrep gcc

libgcc-4.4.7-18.el6_9.2.x86_64

# rpm -e cpp

# rpm -qa | egrep cpp

# rm -rf /temp

# which noip2

/usr/local/bin/noip2

# rm /usr/local/bin/noip2

rm : supprimer fichier « /usr/local/bin/noip2 » ? o

# which noip2

/usr/bin/which: no noip2 in (/sbin/e-smith:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)

# sed -i '/noip2/ d' /etc/rc.d/rc.local

# cat /etc/rc.d/rc.local

#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

@@ Line 140: / Line 140: @@
 '''''Sagemcom 2864'''''
-{| style="width: 80%; background-color:#ffffff;"
+{| style="width: 100%; background-color:#ffffff;align:center;"
-|- style="vertical-align:top;center;"
+|- style="vertical-align:top;"
 |[[Image:SME-101.03-003-VDSL-A.png|center|top|375px]]
-||[[Image:SME-101.03-003-VDSL.png|center|top|375px]]
+|[[Image:SME-101.03-003-VDSL.png|center|top|375px]]
-||[[Image:SME-101.03-007-ArriereVDSL.png|center|top|275px]]
+|[[Image:SME-101.03-007-ArriereVDSL.png|center|top|275px]]
 |}

Local SIP port	Defines the local SIP port the HT502 will listen and transmit. The default value for FXS port 1 is 5060. The default value for FXS port 2 is 5062.
Local RTP port	Defines the local RTP port pair the HT502 will listen and transmit. The default value for FXS port 1 is 5004. The default value for FXS port 2 is 5012.

noip.com	ZoneEdit.com	Easydns.com	dslreports.com	Hammernode (hn.org)
eurodyndns.org	Dtdns.com	loopia.se	dnspark.com	Dynhost (ovh.com)
Changeip.com	Namecheap	Dyndns.org

Difference between revisions of "SME-101.03 ADSL/VDSL, DDNS et Domaine FQDN"

Revision as of 00:21, 3 October 2018

Description générale

Particularités de ce document

Accès Internet

Fournisseur d'accès Internet (FAI)

Modem VDSL

Configuration du Serveur SME

Préparation

Configuration des coordonnées fournies par le FAI

Adaptateur téléphonique analogique HT-502

But du HT-502

Grandstream HT502

Téléphonie cellulaire gratuite par Internet

Redirection de ports vers le HT-502

Redirections des ports

VoIP & HT-502

Login

Statut

Configuration

Vérifications

DNS dynamique

Configuration du domaine dans le gestionnaire du serveur

Contrib smeserver-ddclient

Configuration

Vérification des paramètres ddclient

Ajustement des Clients dynamiques dans Server Manager

Désinstallation de la Contrib smeserver-ddclient

Vérification après le réamorçage

Script client de noip.com

Pré-requis (gcc)

Téléchargement du client noip & compilation

Installation du script client

Réamorçage

Vérification de notre adresse IP

Vérification chez noip.com

Particularité pour un serveur sur un intranet

Reconfiguration de no-ip.com

Conclusion pour DDNS

Régistraire de domaines

Enregistrement d'un nom de domaine

Les enregistrements DNS

Enregistrement A

Gestionnaire Server Manager

Navigation menu

Search