Difference between revisions of "Install From USB"

From SME Server

Revision as of 12:24, 2 January 2013

	Skill level: Medium
	The instructions on this page require a basic knowledge of linux.

Note: I'm using Windows 7 - this work on Win7, should work on XP and later

In your new Hardware ...

Boot from USB
Select Install from Hard Disk
Choose Partition
- Gnerally it will be the last partition
- it was /dev/sda1 when no partition, sde1 when I re-installed on the HP Microserver
- I left the path blank

Originally I used pendrivlinux.com, UNetbootin was a lot simpler

Long Live SME ...

@@ Line 19: / Line 19: @@
 # Select Install from Hard Disk
 # Choose Partition
-#* Mine was ''/dev/sdb1'' when there was a partition - it was ''/dev/sda1'' when no partition
+#* Gnerally it will be the last partition
-#* It will want to know where your .iso image is, I just hit enter (because it was in the root of my usb)
+#* it was ''/dev/sda1'' when no partition, sde1 when I re-installed on the HP Microserver
+#* I left the path blank
-=== Write Grub ===
+Originally I used pendrivlinux.com, UNetbootin was a lot simpler
-* When it booted I had to write Grub (see: http://wiki.centos.org/HowTos/GrubInstallation)
-*# find /grub/stage1
-*# root (hd0,0)
-*# setup (hd0)
-*# reboot
 ''Long Live SME ...''