Difference between revisions of "Monitor Disk Health"
From SME Server
Jump to navigationJump to search| Line 4: | Line 4: | ||
To enable | To enable | ||
config setprop smartd status enabled | config setprop smartd status enabled | ||
| + | |||
| + | And start, (smartd will start automatically on a reboot if enabled) | ||
| + | /etc/rc.d/init.d/smartd start | ||
Errors are emailed admin if and when they are found. | Errors are emailed admin if and when they are found. | ||
Revision as of 11:23, 4 April 2008
Monitor Disk Health
Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.
To enable
config setprop smartd status enabled
And start, (smartd will start automatically on a reboot if enabled)
/etc/rc.d/init.d/smartd start
Errors are emailed admin if and when they are found.
To manually check disks
Generate report
smartctl -t short /dev/hdc (1 minute) smartctl -t long /dev/hdc (1 hour)
View report
smartctl -a /dev/hdc
http://www.linuxmanpages.com/man8/smartd.8.php
http://www.captain.at/howto-linux-smartmontools-smartctl.php
