Difference between revisions of "Talk:Raid"
From SME Server
Jump to navigationJump to searchm |
|||
| Line 8: | Line 8: | ||
To enable | To enable | ||
| − | |||
config setprop smartd status enabled | config setprop smartd status enabled | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
To manually check disks | To manually check disks | ||
Revision as of 11:55, 4 March 2008
We could add a section on enabling smartd to monitor disk health
see http://bugs.contribs.org/show_bug.cgi?id=1445
http://www.linuxmanpages.com/man8/smartd.8.php
http://www.captain.at/howto-linux-smartmontools-smartctl.php
Monitor Disk Health
Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.
To enable
config setprop smartd status enabled
To manually check disks
View report
smartctl -a /dev/hdc
Generate report
smartctl -t short /dev/hdc (1 minute) smartctl -t long /dev/hdc (1 hour)
