Difference between revisions of "Talk:Raid"

config set smartd service 
config setprop smartd status enabled
ln -s /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S40smartd

@@ Line 6: / Line 6: @@
 Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.
-====Method 1====
-Enable
+To enable
   config set smartd service
   config setprop smartd status enabled
   ln -s /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S40smartd
-This will log warnings to /var/log/messages, Emails to admin on critical errors would be good.
+This will log warnings to /var/log/messages.
-====Method 2====
-Create a script that will run at each re-boot, with your own options <br>
-this method just saves having to template the config file
-  nano -w /etc/e-smith/events/local/S40smartd
+to send warning to admin. append the '''-m admin''' directive to DEVICESCAN in the config file
-  #! /bin/sh
+  nano -w /etc/smartd.conf
-  smartd -H -m admin -M diminishing -M test
+  DEVICESCAN -m admin [-M diminishing -M test optional/test]
- chmod +x /etc/e-smith/events/local/S40smartd

Revision as of 07:00, 27 October 2007