Backup of ESXi Virtual Machines using Affa

	Skill level: Advanced
	The instructions on this page may require deviations from standard procedures. A good understanding of linux and Koozali SME Server is recommended.

Introduction

As of version 2, Affa supports hot backing up virtual machines running on the VMWare ESXi server. It uses the VMware Infrastructure Perl Toolkit to communicate with the EXSi and rsync over ssh to transfer the data. Before the backup starts, the state of the running VM is freezed by creating a snapshot of all its disks. After the freezed virtual disk files were backed up, the snapshot is deleted and the config points to the just backed up disks again. Then, as a last step the config files are backed up.

A restore of a VM can be done by simply copying back all archived files to the original location on the ESXi host. It is also possible to copy the files to a different directory (or to another ESXi server) and add the vmx file to the inventory.

	Warning:
	As Affa Version 2 is in a BETA state, errors in design and/or implementation cannot be completely eliminated. Therefore take precautions to avoid negative impacts to your system. In particular do not use it on production systems.

Preparing the Affa Server

Install the VMware Infrastructure (VI) Perl Toolkit

Download the VI Perl Toolkit tarball from the VMWare web site: http://www.vmware.com/support/developer/viperltoolkit/

Login as root and run:

/usr/bin/yum install openssl-devel
/usr/bin/yum --enable=dag install perl-XML-SAX
tar xzf VMware-VIPerl-1.6.0-104313.i386.tar.gz
cd vmware-viperl-distrib
./vmware-install.pl

Ignore this warning: The following Perl modules were found on the system but may be too old to work with VIPerl: URI XML::NamespaceSupport

Install Affa Version 2 beta

Install the latest Affa 2.x beta version. Download the RPM from http://mirror.contribs.org/smeserver/contribs/michaelw/sme7/Affa2

/usr/bin/yum --enable=smecontribs localinstall smeserver-affa-2.0.0-beta*.noarch.rpm

Preparing the ESXi Host for use with Affa

To make the ESXi server ready to cooperate with Affa you must install the rsync program, enable the ssh service, configure passwordless ssh login and add a user for communication using the VMware Infrastructure (VI) Perl Toolkit.

Adding an ESXi User with restricted Permissions

Run the Virtual Infrastructure Client and logon to the ESXi host.

Adding Affa role

Switch to the Administration module and add a new role with permissions to create and delete snapshots

Adding Affa user

Switch back to the Inventory module and add a new user with password:

Assigning permissions

In the Permission Tab assign the new role to the new user.

Configuration of the SSH Service on the ESXi Host

(Note: ESXI uses Dropbear rather than OpenSSL Server)

On the ESXi Server console hit Alt-F1 to get the service shell. Now blind-type the word unsupported to unlock the shell.

Login with the root password.

Edit the '/etc/inetd.conf' file using the vi editor. Remove the leading Hash ('#') from this line:

#ssh     stream  tcp     nowait  root    /sbin/dropbearmulti     dropbear ++min=0,swap,group=shell -i

Save the file.

Find the PID of the inetd process: (1302 in this example)

ps | grep inetd

1302 1302 busybox inetd

Send HUP signal to force inetd to re-read the configuration

kill -HUP 1302

Now you can ssh logon.

Update Dropbear SSH server and client

On ESX3i Dropbear Version 0.49 is installed. This version has a bug that causes an incorrect return status of the executed command. Therefore it must be updated to Version 0.51. This version fixes the problem with wrong exit codes. Only with Dropbear Version 0.51 Affa can detect failures of rsync commands.

Remote copy the dropbearmulti binary to the ESXi host into directory /sbin. This overwrites the existing dropbearmulti version 0.49

scp dropbearmulti root@<ESXiIP>:/sbin/

Then send the HUP signal to the inetd process as described above.

How to get dropbearmulti 0.51 binary

You can either download a compiled binary from http://mirror.contribs.org/smeserver/contribs/michaelw/sme7/Affa2

or you can make it by yourself on a Centos4/SME7.3 box with devel RPMs installed: 1. download dropbear-0.51.tar.gz from http://matt.ucc.asn.au/dropbear/

2. unpack the tarball

tar xzf dropbear-0.51.tar.gz
cd dropbear-0.51

3. edit the file options.h and comment out line 40

/*#define NON_INETD_MODE*/

4. configure and compile

./configure --disable-zlib --disable-openpty
make PROGRAMS="dropbear dbclient scp dropbearkey dropbearconvert" MULTI=1 STATIC=0 SCPPROGRESS=1
strip dropbearmulti

Install the rsync program on the ESXi host

Remote copy the rsync-static binary to the ESXi host into directory /usr/bin.

scp rsync-static root@<ESXiIP>:/usr/bin/

Create symbolic link to /usr/bin/rsync:

ln -fs /usr/bin/rsync-static /usr/bin/rsync

How to get the statically linked rsync binary

You can either download a compiled binary from http://mirror.contribs.org/smeserver/contribs/michaelw/sme7/Affa2

or you can make it by yourself on a Centos4/SME7.3 box with devel RPMs installed:

1. download the source from http://rsync.samba.org/

2. unpack the tarball

tar xzf rsync-3.0.4.tar.gz
cd rsync-3.0.4

3. build the statically linked binary

make CFLAGS="-static" EXEEXT="-static"
strip rsync-static

Configuration of Public Key Login

SSH logon to the ESXi host and create a new home directory for user root

mkdir -p /root/.ssh
chmod -R 700 /root 

Edit /etc/passwd using the vi editor and carefully change the line

root:x:0:0:Administrator:/:/bin/ash

to

root:x:0:0:Administrator:/root:/bin/ash

Once you have configured the Affa ESXi job, run on the Affa server:

affa --send-key <JOB>

Setting up an Affa job

The following assumes, that you are already familiar with configuring Affa and only focus on the ESXi specific parts.

Assume you want to backup the virtual machine named 'myvm' on ESXi server with IP 10.200.48.5.

1. log into the 'affabox' and copy the config helper script

cp -a /usr/lib/affa/jobconfig-esxi-sample.pl /root/esxi-myvm-job.pl

2. edit /root/esxi-myvm-job.pl and set

my $jobname='esxi-myvm';

and

'remoteHostName‘=>'10.200.48.5',

3. tell Affa that this job backups a ESXi virtual machine

'ESXi' => 'yes',

4. set the VM name

'ESXiVMName' => 'myvm',

5. set the username and password (this is the ESXi User with restricted permissions created above)

'ESXiUsername' => 'affa',
'ESXiPassword' => 'secret',

6. save the script, then run it

/root/esxi-myvm-job.pl

7. send the public key

affa --send-key esxi-myvm

8. run the job manually

affa --run esxi-myvm

When the Affa job starts, you can watch the snapshot create task in the Virtual Infrastructure Client.

The name of the snaphot starts with "BEXI-". Do not delete it or revert to it while Affa is running.