Difference between revisions of "VMware Tools"

From SME Server
Jump to navigationJump to search
 
(10 intermediate revisions by 3 users not shown)
Line 93: Line 93:
 
  service vmware-tools start
 
  service vmware-tools start
  
 +
====SME Server 8.0 Guest on ESXi 5.0====
 +
Install the relevant repository
 +
db yum_repositories set vmware-tools repository \
 +
  Name 'VMWare Tools' \
 +
  BaseURL 'http://packages.vmware.com/tools/esx/5.0/rhel5/$basearch' \
 +
  EnableGroups no \
 +
  GPGCheck yes \
 +
  GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 +
  Visible no \
 +
  status disabled
 +
Make the relevant changes stick
 +
signal-event yum-modify
 +
{{Note box| At this point I could not immediately call "yum install ..." for some reason. Just wait a bit if this happens.}}
 +
Import the VMWare RSA key (not sure if this could be done via the db mechanism)
 +
rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub
 +
Update server to latest packages
 +
yum update
 +
Now, installing VMWare tools involves knowing which type of kernel you have, PAE or non-PAE. To check, do a
 +
uname -r
 +
If the output of the command mentioned above contains ''PAE'', then you have a PAE kernel and the following command should be used to install VMWare Tools
 +
yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox
 +
Otherwise, you don't have a PAE kernel and the relevant command to install VMWare Tools is
 +
yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox
 +
Link the start script to run level 7
 +
ln -s /etc/init.d/vmware-tools-services /etc/rc7.d/S90vmware-tools-services
 +
Start the service
 +
/etc/init.d/vmware-tools-services start
 +
Everything should be ok now, just restart the machine. If you by any chance wish to use the vmxnet2 adapter instead of the lance, then shutdown the VM, delete the "Flexible"/"Lance" network adapter and add "vmxnet2" in its place. Start the VM. If all goes ok, you'll now have the improved vmxnet NIC.
 +
 +
====SME Server 8.0 Guest on ESXi 5.0 Update 1====
 +
Install the relevant repository
 +
db yum_repositories set vmware-tools repository \
 +
  Name 'VMWare Tools' \
 +
  BaseURL 'http://packages.vmware.com/tools/esx/5.0u1/rhel5/$basearch' \
 +
  EnableGroups no \
 +
  GPGCheck yes \
 +
  GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 +
  Visible no \
 +
  status disabled
 +
Make the relevant changes stick
 +
signal-event yum-modify
 +
{{Note box| At this point I could not immediately call "yum install ..." for some reason. Just wait a bit if this happens.}}
 +
Import the VMWare RSA key (not sure if this could be done via the db mechanism)
 +
rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub
 +
Update server to latest packages
 +
yum update
 +
Now, installing VMWare tools involves knowing which type of kernel you have, PAE or non-PAE. To check, do a
 +
uname -r
 +
If the output of the command mentioned above contains ''PAE'', then you have a PAE kernel and the following command should be used to install VMWare Tools
 +
yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox
 +
Otherwise, you don't have a PAE kernel and the relevant command to install VMWare Tools is
 +
yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox
 +
Link the start script to run level 7
 +
ln -s /etc/init.d/vmware-tools-services /etc/rc7.d/S90vmware-tools-services
 +
Start the service
 +
/etc/init.d/vmware-tools-services start
 +
Everything should be ok now, just restart the machine. If you by any chance wish to use the vmxnet2 adapter instead of the lance, then shutdown the VM, delete the "Flexible"/"Lance" network adapter and add "vmxnet2" in its place. Start the VM. If all goes ok, you'll now have the improved vmxnet NIC.
 +
 +
====SME Server 9 Alpha3 Guest on ESXi 5.1====
 +
Install repo key
 +
rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub
 +
 +
create yum repo
 +
<nowiki>db yum_repositories set vmware-tools repository \
 +
Name 'VMWare Tools' \
 +
BaseURL 'http://packages.vmware.com/tools/esx/5.1/rhel6/$basearch' \
 +
EnableGroups no \
 +
GPGCheck yes \
 +
GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 +
Visible no \
 +
status disabled</nowiki>
 +
 +
Update yum.conf
 +
expand-template /etc/yum.smerepos.d/sme-base.repo
 +
 +
check for PAE vs non-PAE kernel
 +
uname -r
 +
 +
Install NON-PAE tools if "PAE" is not contained in the output from "uname -a"
 +
uname -a |grep PAE || yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox
 +
 +
Install PAE tools if "PAE" is contained in the output from "uname -a"
 +
  uname -a |grep PAE && yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox
 +
 +
There was no action required to cause the vmware tools to start at boot.  Verify tools are running with
 +
/etc/vmware-tools/init/vmware-tools-services status
 +
 +
====SME Server 9 Guest on ESXi 5.5====
 +
Install repo key
 +
rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub
 +
 +
create yum repo
 +
<nowiki>db yum_repositories set vmware-tools repository \
 +
Name 'VMWare Tools' \
 +
BaseURL 'http://packages.vmware.com/tools/esx/5.5latest/rhel6/$basearch' \
 +
EnableGroups no \
 +
GPGCheck yes \
 +
GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 +
Visible no \
 +
status disabled</nowiki>
 +
 +
Update yum.conf
 +
expand-template /etc/yum.smerepos.d/sme-base.repo
 +
 +
check for [http://en.wikipedia.org/wiki/Physical_Address_Extension PAE vs non-PAE] kernel
 +
uname -r
 +
 +
Install NON-PAE tools if "PAE" is not contained in the output from "uname -a"
 +
uname -a |grep PAE || yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox
 +
 +
Install PAE tools if "PAE" is contained in the output from "uname -a"
 +
  uname -a |grep PAE && yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox
 +
 +
There was no action required to cause the vmware tools to start at boot.  Verify tools are running with
 +
/etc/vmware-tools/init/vmware-tools-services status
 +
====SME Server 10 as Guest====
 +
 +
{{#vardefine:contribname| {{lc: {{#titleparts:  open-vm-tools |1}} }} }}
 +
{{#vardefine:smecontribname| smeserver-{{lc: {{#titleparts:  open-vm-tools |1}} }} }}
 +
 +
Installation of vmware tools on SME 10 is a bit different. For example, no special repository is now needed. But we do have configure some files. Start by downloading the open-vm-tools package:
 +
yum install open-vm-tools
 +
 +
Set a config key for SME to recognise the service:
 +
config set vmtoolsd service status enabled access private
 +
 +
We will need to create a directory and then a file in it:
 +
 +
mkdir -p /usr/lib/systemd/system/vmtoolsd.service.d
 +
nano /usr/lib/systemd/system/vmtoolsd.service.d/50koozali.conf
 +
 +
Contents of 50koozali.conf should be:
 +
[Install]
 +
WantedBy=sme-server.target
 +
 +
Reconfigure and reboot:
 +
signal-event post-upgrade; signal-event reboot
 +
 +
That should do it! Check that the service is running alright:
 +
systemctl status vmtoolsd
 +
 +
Also check that the hypervisor (ESXi/VMWare workstation or other) detects the vmware tools as running.
 +
 +
We now have a contrib to manage this
 +
 +
===== Version =====
 +
<!-- keep this first element as is, you can add some if needed -->
 +
{{#smeversion: {{#var:smecontribname}} }}
 +
 +
===Changelog===
 +
Only released version in smecontrib are listed here.
 +
 +
{{ #smechangelog: {{#var:smecontribname}} }}
 +
 +
=== Uninstall ===
 +
yum remove {{#var:smecontribname}}
 +
 +
=== Bugs ===
 +
Please raise bugs under the SME-Contribs section in {{BugzillaFileBug|product=|component=|title= bugzilla}}
 +
and select the {{#var:smecontribname}} component or use {{BugzillaFileBug|product=SME%20Contribs|component={{#var:smecontribname}}|title=this link}}
 +
 +
Below is an overview of the current issues for this contrib:{{#bugzilla:columns=id,product,version,status,summary|sort=id|order=desc|component={{#var:smecontribname}} |noresultsmessage=No open bugs found.}}
 
----
 
----
 
[[Category:Howto]]
 
[[Category:Howto]]
 +
[[Category:Virtualisation]]

Latest revision as of 14:25, 25 November 2021

Purpose

This document describes the installation of the VMware Tools on a SME guest running on a VMware Server or an ESX Server.

Mount the installation CDROM image

This is not required on ESXi 4!

ESX 3.5

Start the Virtual Infrastructure Client. Make sure that you have added a virtual CDROM device to the SME VM. Power on the SME VM.

Right click in the SME VM and select 'Install/Upgrade VMware Tools'.

VMware Server

Start the VMware Server Console. Make sure that you have added a virtual CDROM device to the SME VM. Power on the SME VM.

Select the SME VM, then select menu 'VM'=>'Install VMware Tools...'.

Installation

SME Server 8 and 7.4 Guests on VMWare Server 2

Log into SME as user root on the local console. 

mkdir -p /mnt/cdrom 
mount /dev/cdrom /mnt/cdrom
rpm -ivh /mnt/cdrom/VMwareTools*i386.rpm
vmware-config-tools.pl
ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools 
reboot
Important.png Note:
After a SME Server update you must re-run vmware-config-tools.pl


SME Server 7.3 and 7.4 Guests on ESXi 3.5

Log into SME as user root on the local console. 

mkdir -p /mnt/cdrom 
mount /dev/cdrom /mnt/cdrom
rpm -ivh /mnt/cdrom/VMwareTools*i386.rpm

Edit the file /etc/rc.d/init.d/vmware-tools and delete the following 2 lines: 

939: vmware_exec 'Guest vmxnet fast network device:' vmware_stop_vmxnet
940: exitcode=$(($exitcode + $?))

Edit the file /usr/bin/vmware-config-tools.pl and search for the following line 

$gSystem{'version_integer'} != kernel_version_integer(2, 4, 9)) {

and change it to 

$gSystem{'version_integer'} != kernel_version_integer(2, 6, 9)) {

On ESXi 3.5.0 Build-123629 it is line #3565, on ESXi 3.5.0 Build-10271 it is line #3545.

Run the configuration script 

vmware-config-tools.pl

and link the start script to run level 7 

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools 
reboot
Important.png Note:
After a SME Server update you must re-run vmware-config-tools.pl


SME Server 7.4 Guest on ESXi 4.0

Download the required packages 

wget http://packages.vmware.com/tools/esx/4.0/rhel4/i686/vmware-open-vm-tools-kmod-8.0.0-164009.165940.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0/rhel4/i686/vmware-open-vm-tools-common-8.0.0-164009.165940.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0/rhel4/i686/vmware-open-vm-tools-nox-8.0.0-164009.165940.el4.i686.rpm

Install the packages and dependencies 

/usr/bin/yum localinstall \
 vmware-open-vm-tools-kmod-8.0.0-164009.165940.el4.i686.rpm \
 vmware-open-vm-tools-common-8.0.0-164009.165940.el4.i686.rpm \
 vmware-open-vm-tools-nox-8.0.0-164009.165940.el4.i686.rpm

Link the start script to run level 7 

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools

Start the service 

service vmware-tools start

SME Server 7.4 Guest on ESXi 4.0 Update 1

Download the required packages 

wget http://packages.vmware.com/tools/esx/4.0u1/rhel4/i686/vmware-open-vm-tools-kmod-8.0.2-208167.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel4/i686/vmware-open-vm-tools-common-8.0.2-208167.el4.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel4/i686/vmware-open-vm-tools-nox-8.0.2-208167.el4.i686.rpm

Install the packages and dependencies 

/usr/bin/yum localinstall \
 vmware-open-vm-tools-kmod-8.0.2-208167.el4.i686.rpm \
 vmware-open-vm-tools-common-8.0.2-208167.el4.i686.rpm \
 vmware-open-vm-tools-nox-8.0.2-208167.el4.i686.rpm

Link the start script to run level 7 

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools

Start the service 

service vmware-tools start

SME Server 8.0 Guest on ESXi 4.0 Update 1

Download the required packages 

wget http://packages.vmware.com/tools/esx/4.0u1/rhel5/i686/vmware-open-vm-tools-kmod-8.0.2-208167.el5.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel5/i686/vmware-open-vm-tools-common-8.0.2-208167.el5.i686.rpm
wget http://packages.vmware.com/tools/esx/4.0u1/rhel5/i686/vmware-open-vm-tools-nox-8.0.2-208167.el5.i686.rpm

Install the packages and dependencies 

/usr/bin/yum localinstall \
 vmware-open-vm-tools-kmod-8.0.2-208167.el5.i686.rpm \
 vmware-open-vm-tools-common-8.0.2-208167.el5.i686.rpm \
 vmware-open-vm-tools-nox-8.0.2-208167.el5.i686.rpm

Link the start script to run level 7 

ln -fs /etc/rc.d/init.d/vmware-tools /etc/rc7.d/S90vmware-tools

Start the service 

service vmware-tools start

SME Server 8.0 Guest on ESXi 5.0

Install the relevant repository 

db yum_repositories set vmware-tools repository \
 Name 'VMWare Tools' \
 BaseURL 'http://packages.vmware.com/tools/esx/5.0/rhel5/$basearch' \
 EnableGroups no \
 GPGCheck yes \
 GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 Visible no \
 status disabled

Make the relevant changes stick 

signal-event yum-modify
Important.png Note:
At this point I could not immediately call "yum install ..." for some reason. Just wait a bit if this happens.


Import the VMWare RSA key (not sure if this could be done via the db mechanism) 

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

Update server to latest packages 

yum update

Now, installing VMWare tools involves knowing which type of kernel you have, PAE or non-PAE. To check, do a 

uname -r

If the output of the command mentioned above contains PAE, then you have a PAE kernel and the following command should be used to install VMWare Tools 

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

Otherwise, you don't have a PAE kernel and the relevant command to install VMWare Tools is 

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Link the start script to run level 7 

ln -s /etc/init.d/vmware-tools-services /etc/rc7.d/S90vmware-tools-services

Start the service 

/etc/init.d/vmware-tools-services start

Everything should be ok now, just restart the machine. If you by any chance wish to use the vmxnet2 adapter instead of the lance, then shutdown the VM, delete the "Flexible"/"Lance" network adapter and add "vmxnet2" in its place. Start the VM. If all goes ok, you'll now have the improved vmxnet NIC.

SME Server 8.0 Guest on ESXi 5.0 Update 1

Install the relevant repository 

db yum_repositories set vmware-tools repository \
 Name 'VMWare Tools' \
 BaseURL 'http://packages.vmware.com/tools/esx/5.0u1/rhel5/$basearch' \
 EnableGroups no \
 GPGCheck yes \
 GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
 Visible no \
 status disabled

Make the relevant changes stick 

signal-event yum-modify
Important.png Note:
At this point I could not immediately call "yum install ..." for some reason. Just wait a bit if this happens.


Import the VMWare RSA key (not sure if this could be done via the db mechanism) 

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

Update server to latest packages 

yum update

Now, installing VMWare tools involves knowing which type of kernel you have, PAE or non-PAE. To check, do a 

uname -r

If the output of the command mentioned above contains PAE, then you have a PAE kernel and the following command should be used to install VMWare Tools 

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

Otherwise, you don't have a PAE kernel and the relevant command to install VMWare Tools is 

yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Link the start script to run level 7 

ln -s /etc/init.d/vmware-tools-services /etc/rc7.d/S90vmware-tools-services

Start the service 

/etc/init.d/vmware-tools-services start

Everything should be ok now, just restart the machine. If you by any chance wish to use the vmxnet2 adapter instead of the lance, then shutdown the VM, delete the "Flexible"/"Lance" network adapter and add "vmxnet2" in its place. Start the VM. If all goes ok, you'll now have the improved vmxnet NIC.

SME Server 9 Alpha3 Guest on ESXi 5.1

Install repo key 

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

create yum repo 

db yum_repositories set vmware-tools repository \
Name 'VMWare Tools' \
BaseURL 'http://packages.vmware.com/tools/esx/5.1/rhel6/$basearch' \
EnableGroups no \
GPGCheck yes \
GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
Visible no \
status disabled

Update yum.conf 

expand-template /etc/yum.smerepos.d/sme-base.repo

check for PAE vs non-PAE kernel 

uname -r

Install NON-PAE tools if "PAE" is not contained in the output from "uname -a" 

uname -a |grep PAE || yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Install PAE tools if "PAE" is contained in the output from "uname -a" 

 uname -a |grep PAE && yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

There was no action required to cause the vmware tools to start at boot. Verify tools are running with 

/etc/vmware-tools/init/vmware-tools-services status

SME Server 9 Guest on ESXi 5.5

Install repo key 

rpm --import http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-RSA-KEY.pub

create yum repo 

db yum_repositories set vmware-tools repository \
Name 'VMWare Tools' \
BaseURL 'http://packages.vmware.com/tools/esx/5.5latest/rhel6/$basearch' \
EnableGroups no \
GPGCheck yes \
GPGKey http://packages.vmware.com/tools/keys/VMWARE-PACKAGING-GPG-DSA-KEY.pub \
Visible no \
status disabled

Update yum.conf 

expand-template /etc/yum.smerepos.d/sme-base.repo

check for PAE vs non-PAE kernel 

uname -r

Install NON-PAE tools if "PAE" is not contained in the output from "uname -a" 

uname -a |grep PAE || yum --enablerepo=vmware-tools install vmware-tools-esx-kmods vmware-tools-esx-nox

Install PAE tools if "PAE" is contained in the output from "uname -a" 

 uname -a |grep PAE && yum --enablerepo=vmware-tools install vmware-tools-esx-kmods-PAE vmware-tools-esx-nox

There was no action required to cause the vmware tools to start at boot. Verify tools are running with 

/etc/vmware-tools/init/vmware-tools-services status

SME Server 10 as Guest

Installation of vmware tools on SME 10 is a bit different. For example, no special repository is now needed. But we do have configure some files. Start by downloading the open-vm-tools package: 

yum install open-vm-tools

Set a config key for SME to recognise the service: 

config set vmtoolsd service status enabled access private

We will need to create a directory and then a file in it: 

mkdir -p /usr/lib/systemd/system/vmtoolsd.service.d
nano /usr/lib/systemd/system/vmtoolsd.service.d/50koozali.conf

Contents of 50koozali.conf should be: 

[Install]
WantedBy=sme-server.target

Reconfigure and reboot: 

signal-event post-upgrade; signal-event reboot

That should do it! Check that the service is running alright: 

systemctl status vmtoolsd

Also check that the hypervisor (ESXi/VMWare workstation or other) detects the vmware tools as running.

We now have a contrib to manage this

Version
Contrib 10:
smeserver-open-vm-tools
The latest version of smeserver-open-vm-tools is available in the SME repository, click on the version number(s) for more information.


Changelog

Only released version in smecontrib are listed here.

smeserver-open-vm-tools Changelog: SME 10 (smecontribs)
2021/11/25 John Crisp 0.1-3.sme
- Really fix bogus date
2021/11/25 John Crisp 0.1-2.sme
- Fix bogus date

2021/11/25 John Crisp 0.1-1.sme
- Initial import to Koozali SME 10 [SME: 11776]

- Thanks to Michail Pappas for his work


Uninstall

yum remove smeserver-open-vm-tools

Bugs

Please raise bugs under the SME-Contribs section in bugzilla

and select the smeserver-open-vm-tools component or use this link


Below is an overview of the current issues for this contrib:

IDProductVersionStatusSummary (2 tasks) ⇒
11983SME Contribs10.0CONFIRMEDupdate description
11982SME Contribs10.0CONFIRMEDnoise during install
Retrieved from "https://wiki.koozali.org/index.php?title=VMware_Tools&oldid=40644"