Difference between revisions of "Uninterruptable Power Supply"
m |
m |
||
| Line 43: | Line 43: | ||
http://bugs.contribs.org/show_bug.cgi?id=629 | http://bugs.contribs.org/show_bug.cgi?id=629 | ||
| − | [[Category:NutUPS | + | [[Category:Howto|NutUPS]] |
Revision as of 11:00, 27 February 2007
Nut UPS – Uninterruptable Power Supply
The primary goal of the Network UPS Tools (NUT) project is to provide reliable monitoring of UPS hardware and ensure safe shutdowns of the systems which are connected.
Standard configuration
Obtain your configuration values
Find your model here http://www.networkupstools.org/compat/stable.html
Type is only used if your model is genericups
note. /dev/ttyS0 = com1, [if using USB]
set configuration values
config setprop nut Device /dev/ttyS0 config setprop nut Model apcsmart config setprop nut Type 7 config setprop nut status enabled
check
config show nut
apply changes and restart server
signal-event post-upgrade ; signal-event reboot
confirm server is communicating with UPS
upsc UPS@localhost
Emails are sent to admin whenever a UPS event occurs
Configuring as a slave
where 192.168.33.11 is your UPS master, the computer that will communicate with the UPS The hostname of the server may also work.
set configuration values
config setprop nut SlaveUPS UPS@192.168.33.11 config setprop nut Master no
apply changes and restart server
signal-event post-upgrade ; signal-event reboot
confirm server is communicating with master
upsc UPS@192.168.33.11
Conecting multiple UPS's
to be added http://bugs.contribs.org/show_bug.cgi?id=629
