Difference between revisions of "Zoneminder"
Unnilennium (talk | contribs) |
Unnilennium (talk | contribs) |
||
Line 30: | Line 30: | ||
====Requirements==== | ====Requirements==== | ||
You can choose to activate one of the php version as long as it is at least >=56 | You can choose to activate one of the php version as long as it is at least >=56 | ||
− | yum --enablerepo=smecontribs,smedev install smeserver-extrarepositories-zmrepo smeserver-extrarepositories-remi-safe | + | yum --enablerepo=smecontribs,smedev install smeserver-extrarepositories-zmrepo smeserver-extrarepositories-remi-safe smeserver-extrarepositories-rpmfusion smeserver-extrarepositories-epel |
signal-event yum-modify | signal-event yum-modify | ||
yum install smeserver-php-scl --enablerepo=smecontribs | yum install smeserver-php-scl --enablerepo=smecontribs | ||
− | config | + | config setprop php54 PhpModule disabled |
− | config | + | config setprop php55 PhpModule disabled |
− | config | + | config setprop php56 PhpModule enabled |
− | config | + | config setprop php70 PhpModule disabled |
− | config | + | config setprop php71 PhpModule disabled |
signal-event php-update | signal-event php-update | ||
====Install Zoneminder from the zmrepo==== | ====Install Zoneminder from the zmrepo==== | ||
+ | yum install x264-libs.x86_64 librtmp.x86_64 xvidcore.x86_64 --enablerepo=rpmfusion | ||
yum install smeserver-zoneminder zoneminder --enablerepo=zmrepo,smecontribs,smedev,smetest | yum install smeserver-zoneminder zoneminder --enablerepo=zmrepo,smecontribs,smedev,smetest | ||
signal-event zoneminder-update | signal-event zoneminder-update | ||
config set UnsavedChanges no | config set UnsavedChanges no | ||
+ | |||
+ | <syntaxhighlight lang="bash"> | ||
+ | # output of yum | ||
+ | |||
+ | ================================================================================================================= | ||
+ | Paquet Architecture Version Dépôt Taille | ||
+ | ================================================================================================================= | ||
+ | Installation: | ||
+ | zoneminder x86_64 1.30.4-1.el6 zmrepo 9.1 M | ||
+ | Installation pour dépendance: | ||
+ | SDL_image x86_64 1.2.12-9.el6 zmrepo 39 k | ||
+ | atk x86_64 1.30.0-1.el6 base 195 k | ||
+ | cairo x86_64 1.8.8-6.el6_6 base 309 k | ||
+ | cambozola noarch 0.93-1.el6 zmrepo 99 k | ||
+ | dirac-libs x86_64 1.0.2-4.el6 smecontribs 335 k | ||
+ | faad2-libs x86_64 1:2.7-2.el6.3 zmrepo 145 k | ||
+ | freerdp-libs x86_64 1.0.2-6.el6 base 208 k | ||
+ | game-music-emu x86_64 0.6.1-1.el6 zmrepo 140 k | ||
+ | gdk-pixbuf2 x86_64 2.24.1-6.el6_7 base 501 k | ||
+ | giflib x86_64 4.1.6-3.1.el6 base 37 k | ||
+ | gtk2 x86_64 2.24.23-9.el6 base 3.2 M | ||
+ | hicolor-icon-theme noarch 0.11-1.1.el6 base 40 k | ||
+ | jack-audio-connection-kit x86_64 0.121.3-1.el6 zmrepo 186 k | ||
+ | jasper-libs x86_64 1.900.1-22.el6 base 139 k | ||
+ | java-1.8.0-openjdk x86_64 1:1.8.0.191.b12-0.el6_10 updates 212 k | ||
+ | java-1.8.0-openjdk-headless x86_64 1:1.8.0.191.b12-0.el6_10 updates 32 M | ||
+ | jpackage-utils noarch 1.7.5-3.16.el6 base 60 k | ||
+ | libXcomposite x86_64 0.4.3-4.el6 base 20 k | ||
+ | libXcursor x86_64 1.1.14-2.1.el6 base 28 k | ||
+ | libXfont x86_64 1.5.1-2.el6 base 145 k | ||
+ | libXft x86_64 2.3.2-1.el6 base 55 k | ||
+ | libXinerama x86_64 1.1.3-2.1.el6 base 13 k | ||
+ | libXrandr x86_64 1.5.1-1.el6 base 25 k | ||
+ | libXrender x86_64 0.9.10-1.el6 base 24 k | ||
+ | libXv x86_64 1.0.11-1.el6 base 17 k | ||
+ | liba52 x86_64 0.7.4-27.el6 smetest 33 k | ||
+ | libavc1394 x86_64 0.5.3-9.1.el6 base 45 k | ||
+ | libavdevice x86_64 2.6.4-1.el6 zmrepo 70 k | ||
+ | libcddb x86_64 1.3.2-2.el6 zmrepo 67 k | ||
+ | libchromaprint x86_64 1.1-3.el6 zmrepo 45 k | ||
+ | libcroco x86_64 0.6.2-5.el6 base 100 k | ||
+ | libdca x86_64 0.0.5-6.el6 zmrepo 100 k | ||
+ | libdvbpsi x86_64 1.2.0-3.el6 zmrepo 93 k | ||
+ | libdvdnav x86_64 4.1.4-0.1.svn1184.el6 zmrepo 51 k | ||
+ | libdvdread x86_64 4.1.4-0.3.svn1183.el6 base 63 k | ||
+ | libebml x86_64 1.2.2-1.el6 zmrepo 67 k | ||
+ | libfontenc x86_64 1.1.2-3.el6 base 29 k | ||
+ | libgomp x86_64 4.4.7-23.el6 base 135 k | ||
+ | libkate x86_64 0.3.8-1.el6 zmrepo 44 k | ||
+ | libmad x86_64 0.15.1b-14.el6 zmrepo 72 k | ||
+ | libmatroska x86_64 1.2.0-1.el6 zmrepo 134 k | ||
+ | libmodplug x86_64 1:0.8.8.5-1.el6 zmrepo 158 k | ||
+ | libmpcdec x86_64 1.2.6-6.1.el6 base 26 k | ||
+ | libmpeg2 x86_64 0.5.1-9.el6 zmrepo 64 k | ||
+ | libmtp x86_64 1.0.1-2.el6 base 99 k | ||
+ | librsvg2 x86_64 2.26.0-14.el6 base 140 k | ||
+ | libsamplerate x86_64 0.1.7-2.1.el6 base 1.0 M | ||
+ | libshout x86_64 2.2.2-5.1.el6 base 40 k | ||
+ | libsmbclient x86_64 3.6.23-51.el6 base 1.6 M | ||
+ | libthai x86_64 0.1.12-3.el6 base 183 k | ||
+ | libtiger x86_64 0.3.4-1.el6 zmrepo 34 k | ||
+ | libupnp x86_64 1.6.25-1.el6 smecontribs 95 k | ||
+ | libvdpau x86_64 0.9-1.el6 zmrepo 29 k | ||
+ | libxkbfile x86_64 1.0.6-1.1.el6 base 74 k | ||
+ | lirc-libs x86_64 0.9.0-8.el6 zmrepo 33 k | ||
+ | live555 x86_64 0-0.37.2012.04.27.el6 zmrepo 305 k | ||
+ | minizip x86_64 1.2.3-29.el6 base 25 k | ||
+ | opencore-amr x86_64 0.1.2-2.el6 smetest 162 k | ||
+ | opus x86_64 1.1.3-2.el6 zmrepo 179 k | ||
+ | pango x86_64 1.28.1-11.el6 base 351 k | ||
+ | perl-AppConfig noarch 1.66-6.el6 base 87 k | ||
+ | perl-Archive-Zip noarch 1.30-2.el6 base 107 k | ||
+ | perl-Astro-SunTime noarch 0.01-1 zmrepo 5.0 k | ||
+ | perl-Class-Load noarch 0.10-1.el6 zmrepo 22 k | ||
+ | perl-Class-Std noarch 0.0.8-5.el6 zmrepo 46 k | ||
+ | perl-Class-Std-Fast noarch 0.0.8-2.el6 zmrepo 23 k | ||
+ | perl-Data-Dump noarch 1.15-1.el6 zmrepo 28 k | ||
+ | perl-Data-OptList noarch 0.104-4.el6 base 12 k | ||
+ | perl-Device-SerialPort x86_64 1.04-5.el6 zmrepo 64 k | ||
+ | perl-IO-Interface x86_64 1.05-15.el6 zmrepo 29 k | ||
+ | perl-IO-Socket-Multicast x86_64 1.12-1.el6 zmrepo 23 k | ||
+ | perl-Locale-Maketext-Simple x86_64 1:0.18-144.el6 base 32 k | ||
+ | perl-Module-Load x86_64 1:0.16-144.el6 base 29 k | ||
+ | perl-Module-Load-Conditional x86_64 0.30-144.el6 base 35 k | ||
+ | perl-Package-DeprecationManager noarch 0.11-1.el6 zmrepo 17 k | ||
+ | perl-Package-Stash noarch 0.32-1.el6 zmrepo 32 k | ||
+ | perl-Package-Stash-XS x86_64 0.25-1.el6 zmrepo 30 k | ||
+ | perl-Params-Check x86_64 1:0.26-144.el6 base 36 k | ||
+ | perl-Pod-POM noarch 0.25-2.el6 base 75 k | ||
+ | perl-SOAP-WSDL noarch 3.003-2.el6 zmrepo 141 k | ||
+ | perl-Sub-Install noarch 0.925-6.el6 base 20 k | ||
+ | perl-Sys-CPU x86_64 0.51-7.el6 zmrepo 12 k | ||
+ | perl-Sys-MemInfo x86_64 0.91-5.el6 zmrepo 14 k | ||
+ | perl-Sys-Mmap x86_64 0.17-6.el6 zmrepo 30 k | ||
+ | perl-Template-Toolkit x86_64 2.22-5.el6 base 1.3 M | ||
+ | perl-TermReadKey x86_64 2.30-13.el6 base 31 k | ||
+ | perl-Time-modules noarch 2006.0814-5.el6 base 38 k | ||
+ | perl-Try-Tiny noarch 0.11-4.el6 zmrepo 23 k | ||
+ | perl-URI-Encode noarch 0.09-1.el6 zmrepo 18 k | ||
+ | perl-X10 noarch 0.03-1 zmrepo 26 k | ||
+ | php-pecl-apcu x86_64 4.0.11-2.el6 zmrepo 58 k | ||
+ | pixman x86_64 0.32.8-1.el6 base 243 k | ||
+ | soxr x86_64 0.1.2-1.el6 zmrepo 71 k | ||
+ | taglib x86_64 1.6.1-1.1.el6 base 196 k | ||
+ | ttmkfdir x86_64 3.0.9-32.1.el6 base 43 k | ||
+ | twolame-libs x86_64 0.3.13-2.el6 zmrepo 48 k | ||
+ | tzdata-java noarch 2018g-1.el6 updates 186 k | ||
+ | vlc-core x86_64 2.1.6-3.el6 zmrepo 9.8 M | ||
+ | vo-amrwbenc x86_64 0.1.1-2.el6.1 zmrepo 72 k | ||
+ | x265-libs x86_64 1.6-1.el6 zmrepo 595 k | ||
+ | xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k | ||
+ | xorg-x11-fonts-Type1 noarch 7.2-11.el6 base 520 k | ||
+ | zvbi x86_64 0.2.35-1.el6 zmrepo 432 k | ||
+ | Mise à jour pour dépendance: | ||
+ | celt x86_64 0.11.3-1.el6 zmrepo 73 k | ||
+ | ffmpeg x86_64 2.6.4-1.el6 zmrepo 1.2 M | ||
+ | ffmpeg-libs x86_64 2.6.4-1.el6 zmrepo 5.0 M | ||
+ | |||
+ | Résumé de la transaction | ||
+ | ================================================================================================================= | ||
+ | Installation de 104 paquet(s) | ||
+ | Mise à jour de 3 paquet(s) | ||
+ | |||
+ | </syntaxhighlight> | ||
== NFR Acces Zoneminder via sub domain== | == NFR Acces Zoneminder via sub domain== |
Revision as of 05:17, 29 December 2018
zoneminder logo | |
Maintainer | Unnilennium |
---|---|
Url | https://www.zoneminder.com |
Category | |
Tags | cctv, zoneminder, zm, video, ip camera |
Version
Description
ZoneMinder is intended for use in single or multi-camera video security applications, including commercial or home CCTV, theft prevention and child, family member or home monitoring and other domestic care scenarios such as nanny cam installations. It supports capture, analysis, recording, and monitoring of video data coming from one or more video or network cameras attached to a Linux system. ZoneMinder also support web and semi-automatic control of Pan/Tilt/Zoom cameras using a variety of protocols. It is suitable for use as a DIY home video security system and for commercial or professional video security and surveillance. It can also be integrated into a home automation system via X.10 or other protocols.
This contrib is for IP Camera's only.
Installation
Requirements
You can choose to activate one of the php version as long as it is at least >=56
yum --enablerepo=smecontribs,smedev install smeserver-extrarepositories-zmrepo smeserver-extrarepositories-remi-safe smeserver-extrarepositories-rpmfusion smeserver-extrarepositories-epel signal-event yum-modify yum install smeserver-php-scl --enablerepo=smecontribs config setprop php54 PhpModule disabled config setprop php55 PhpModule disabled config setprop php56 PhpModule enabled config setprop php70 PhpModule disabled config setprop php71 PhpModule disabled signal-event php-update
Install Zoneminder from the zmrepo
yum install x264-libs.x86_64 librtmp.x86_64 xvidcore.x86_64 --enablerepo=rpmfusion yum install smeserver-zoneminder zoneminder --enablerepo=zmrepo,smecontribs,smedev,smetest signal-event zoneminder-update config set UnsavedChanges no
# output of yum
=================================================================================================================
Paquet Architecture Version Dépôt Taille
=================================================================================================================
Installation:
zoneminder x86_64 1.30.4-1.el6 zmrepo 9.1 M
Installation pour dépendance:
SDL_image x86_64 1.2.12-9.el6 zmrepo 39 k
atk x86_64 1.30.0-1.el6 base 195 k
cairo x86_64 1.8.8-6.el6_6 base 309 k
cambozola noarch 0.93-1.el6 zmrepo 99 k
dirac-libs x86_64 1.0.2-4.el6 smecontribs 335 k
faad2-libs x86_64 1:2.7-2.el6.3 zmrepo 145 k
freerdp-libs x86_64 1.0.2-6.el6 base 208 k
game-music-emu x86_64 0.6.1-1.el6 zmrepo 140 k
gdk-pixbuf2 x86_64 2.24.1-6.el6_7 base 501 k
giflib x86_64 4.1.6-3.1.el6 base 37 k
gtk2 x86_64 2.24.23-9.el6 base 3.2 M
hicolor-icon-theme noarch 0.11-1.1.el6 base 40 k
jack-audio-connection-kit x86_64 0.121.3-1.el6 zmrepo 186 k
jasper-libs x86_64 1.900.1-22.el6 base 139 k
java-1.8.0-openjdk x86_64 1:1.8.0.191.b12-0.el6_10 updates 212 k
java-1.8.0-openjdk-headless x86_64 1:1.8.0.191.b12-0.el6_10 updates 32 M
jpackage-utils noarch 1.7.5-3.16.el6 base 60 k
libXcomposite x86_64 0.4.3-4.el6 base 20 k
libXcursor x86_64 1.1.14-2.1.el6 base 28 k
libXfont x86_64 1.5.1-2.el6 base 145 k
libXft x86_64 2.3.2-1.el6 base 55 k
libXinerama x86_64 1.1.3-2.1.el6 base 13 k
libXrandr x86_64 1.5.1-1.el6 base 25 k
libXrender x86_64 0.9.10-1.el6 base 24 k
libXv x86_64 1.0.11-1.el6 base 17 k
liba52 x86_64 0.7.4-27.el6 smetest 33 k
libavc1394 x86_64 0.5.3-9.1.el6 base 45 k
libavdevice x86_64 2.6.4-1.el6 zmrepo 70 k
libcddb x86_64 1.3.2-2.el6 zmrepo 67 k
libchromaprint x86_64 1.1-3.el6 zmrepo 45 k
libcroco x86_64 0.6.2-5.el6 base 100 k
libdca x86_64 0.0.5-6.el6 zmrepo 100 k
libdvbpsi x86_64 1.2.0-3.el6 zmrepo 93 k
libdvdnav x86_64 4.1.4-0.1.svn1184.el6 zmrepo 51 k
libdvdread x86_64 4.1.4-0.3.svn1183.el6 base 63 k
libebml x86_64 1.2.2-1.el6 zmrepo 67 k
libfontenc x86_64 1.1.2-3.el6 base 29 k
libgomp x86_64 4.4.7-23.el6 base 135 k
libkate x86_64 0.3.8-1.el6 zmrepo 44 k
libmad x86_64 0.15.1b-14.el6 zmrepo 72 k
libmatroska x86_64 1.2.0-1.el6 zmrepo 134 k
libmodplug x86_64 1:0.8.8.5-1.el6 zmrepo 158 k
libmpcdec x86_64 1.2.6-6.1.el6 base 26 k
libmpeg2 x86_64 0.5.1-9.el6 zmrepo 64 k
libmtp x86_64 1.0.1-2.el6 base 99 k
librsvg2 x86_64 2.26.0-14.el6 base 140 k
libsamplerate x86_64 0.1.7-2.1.el6 base 1.0 M
libshout x86_64 2.2.2-5.1.el6 base 40 k
libsmbclient x86_64 3.6.23-51.el6 base 1.6 M
libthai x86_64 0.1.12-3.el6 base 183 k
libtiger x86_64 0.3.4-1.el6 zmrepo 34 k
libupnp x86_64 1.6.25-1.el6 smecontribs 95 k
libvdpau x86_64 0.9-1.el6 zmrepo 29 k
libxkbfile x86_64 1.0.6-1.1.el6 base 74 k
lirc-libs x86_64 0.9.0-8.el6 zmrepo 33 k
live555 x86_64 0-0.37.2012.04.27.el6 zmrepo 305 k
minizip x86_64 1.2.3-29.el6 base 25 k
opencore-amr x86_64 0.1.2-2.el6 smetest 162 k
opus x86_64 1.1.3-2.el6 zmrepo 179 k
pango x86_64 1.28.1-11.el6 base 351 k
perl-AppConfig noarch 1.66-6.el6 base 87 k
perl-Archive-Zip noarch 1.30-2.el6 base 107 k
perl-Astro-SunTime noarch 0.01-1 zmrepo 5.0 k
perl-Class-Load noarch 0.10-1.el6 zmrepo 22 k
perl-Class-Std noarch 0.0.8-5.el6 zmrepo 46 k
perl-Class-Std-Fast noarch 0.0.8-2.el6 zmrepo 23 k
perl-Data-Dump noarch 1.15-1.el6 zmrepo 28 k
perl-Data-OptList noarch 0.104-4.el6 base 12 k
perl-Device-SerialPort x86_64 1.04-5.el6 zmrepo 64 k
perl-IO-Interface x86_64 1.05-15.el6 zmrepo 29 k
perl-IO-Socket-Multicast x86_64 1.12-1.el6 zmrepo 23 k
perl-Locale-Maketext-Simple x86_64 1:0.18-144.el6 base 32 k
perl-Module-Load x86_64 1:0.16-144.el6 base 29 k
perl-Module-Load-Conditional x86_64 0.30-144.el6 base 35 k
perl-Package-DeprecationManager noarch 0.11-1.el6 zmrepo 17 k
perl-Package-Stash noarch 0.32-1.el6 zmrepo 32 k
perl-Package-Stash-XS x86_64 0.25-1.el6 zmrepo 30 k
perl-Params-Check x86_64 1:0.26-144.el6 base 36 k
perl-Pod-POM noarch 0.25-2.el6 base 75 k
perl-SOAP-WSDL noarch 3.003-2.el6 zmrepo 141 k
perl-Sub-Install noarch 0.925-6.el6 base 20 k
perl-Sys-CPU x86_64 0.51-7.el6 zmrepo 12 k
perl-Sys-MemInfo x86_64 0.91-5.el6 zmrepo 14 k
perl-Sys-Mmap x86_64 0.17-6.el6 zmrepo 30 k
perl-Template-Toolkit x86_64 2.22-5.el6 base 1.3 M
perl-TermReadKey x86_64 2.30-13.el6 base 31 k
perl-Time-modules noarch 2006.0814-5.el6 base 38 k
perl-Try-Tiny noarch 0.11-4.el6 zmrepo 23 k
perl-URI-Encode noarch 0.09-1.el6 zmrepo 18 k
perl-X10 noarch 0.03-1 zmrepo 26 k
php-pecl-apcu x86_64 4.0.11-2.el6 zmrepo 58 k
pixman x86_64 0.32.8-1.el6 base 243 k
soxr x86_64 0.1.2-1.el6 zmrepo 71 k
taglib x86_64 1.6.1-1.1.el6 base 196 k
ttmkfdir x86_64 3.0.9-32.1.el6 base 43 k
twolame-libs x86_64 0.3.13-2.el6 zmrepo 48 k
tzdata-java noarch 2018g-1.el6 updates 186 k
vlc-core x86_64 2.1.6-3.el6 zmrepo 9.8 M
vo-amrwbenc x86_64 0.1.1-2.el6.1 zmrepo 72 k
x265-libs x86_64 1.6-1.el6 zmrepo 595 k
xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k
xorg-x11-fonts-Type1 noarch 7.2-11.el6 base 520 k
zvbi x86_64 0.2.35-1.el6 zmrepo 432 k
Mise à jour pour dépendance:
celt x86_64 0.11.3-1.el6 zmrepo 73 k
ffmpeg x86_64 2.6.4-1.el6 zmrepo 1.2 M
ffmpeg-libs x86_64 2.6.4-1.el6 zmrepo 5.0 M
Résumé de la transaction
=================================================================================================================
Installation de 104 paquet(s)
Mise à jour de 3 paquet(s)
NFR Acces Zoneminder via sub domain
Instead of accessing the Zoneminder portal at http://myserver.com/zm, it is possible to change this to e.g. https://cctv.myserver.com. For this the easiest and comfortable way is to use the webapps-common contrib.
Install the webapps-common contrib according to the Contrib page. Then (as per example for https://cctv.myserver.com) issue the following as root:
db domains set cctv.myserver.com domain Description "CCTV" Content Primary \ Nameservers internet TemplatePath WebAppVirtualHost \ DocumentRoot /usr/share/zoneminder/www RequireSSL enabled signal-event domain-create cctv.myserver.com
Next you need to adjust the existing (from above) custom template (make a backup copy first):
sed -i '/Alias/d' /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/98zoneminder
Followed by:
signal-event webapps-update
to activate all changes. Now you can reach your zoneminder portal at https://cctv.myserver.com
Uninstall
service zoneminder stop yum --setopt=tsflags=noscripts remove zoneminder smeserver-zoneminder
do not forget to remove the domain you created if you did
signal-event domain-delete cctv.myserver.com signal-event webapps-update
Now to cleanup everything you may want to perform the usual post-upgrade and reboot events. Apart from the php-scl and webapps contribs, all that is left is the MySQL database zm and the logfiles. It's up to you what to do with them.
ZoneMinder clients
By default, ZoneMinder can be accessed via the webinterface. There are also 3rd party client applications available.
zmNinja, a beautiful fast and efficient client application (freely available on Github) DEMO
- Android - Play Store
- iOS - iTunes
- Mac/Windows/Linux Github
Bugs
Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-zoneminder component or use this link
Below is an overview of the current issues for this contrib:
ID | Product | Version | Status | Summary (3 tasks) ⇒ |
---|---|---|---|---|
12373 | SME Contribs | 10.0 | CONFIRMED | /etc/e-smith/events/actions/zoneminder prevents system to start after reboot in bootstrap console |
12219 | SME Contribs | 10.0 | RESOLVED | Unable to install Zoneminder |
11226 | SME Contribs | 10alpha | RESOLVED | Initial Import in SME 10 [smeserver-zoneminder] |
Changelog
Only released version in smecontrib are listed here.