Difference between revisions of "Affa"

From SME Server
Jump to navigationJump to search
Line 276: Line 276:
 
=== Changelog ===
 
=== Changelog ===
 
<pre>
 
<pre>
 +
* Mon Apr 30 2007 Michael Weinberger
 +
 +
- Version 0.1.3
 +
  modified 'use constant* syntax in watchdog script for compatibility with perl 5.6 on SME6
 +
 +
 
* Fri Apr 27 2007 Michael Weinberger
 
* Fri Apr 27 2007 Michael Weinberger
  

Revision as of 15:57, 30 April 2007

Automated Remote Disk Archiver


UNDER CONSTRUCTION


Maintainer

Michael Weinberger

Affa was contributed on Thu Apr 05, 2007


Description

The main purpose of this affa package is to turn a SME 7 Server into a dedicated backup box in a few minutes. Affa backups as many as you like SME servers or any other servers which have sshd running and rsync installed. Once it was configured, Affa runs reliable and unattended and send warning message in case of an error.

All backup archive are full backups. As Affa make use of the hardlink technique. Therefore a new full backup only needs disk space for the differences plus the filesystem overhead for the hardlinks and directories (which is typically 2-3%).

Affa is based on the rsync program and supports the rsync --compress option. This allows you to run backups over the internet or VPN. A typical setup is one or more Affa backup servers placed in different locations, which backup the production server(s) over the VPN.

A special feature is the rise option, which allows you to rise the backup server to your production server from a backup archive in case of a dead loss of your production server. The rise is executed within a extremly short time, even with huge ammount of data. The rise feature uses hardlinks and therefore does not use up additional disk space.

Affa features at a glance

  • Makes full backups with every scheduled run
  • Keeps configurable number of scheduled, daily, weekly, monthly and yearly full backup archives
  • Using rsync with optional compression for low traffic allows backups over the internet/VPN
  • Uses hardlink technique, i.e. physical disk space only needed for the differences between two full backups
  • Backup jobs are started by crond
  • Backups the default e-smith directories/files with property SMEServer set to yes
  • Additional directories/files can be included
  • Directories/files can be excluded from the backup
  • Non-SME server linuxes can be backuped by setting SMEServer property to no and using a include list
  • Configurable nice level for rsync processes on backup and source server
  • Optional run of custom programs before and after a job run (e.g. running tape backup)
  • Checks the disk space left after a job run with warning levels strict, normal or risky
  • Extensive checking of failure conditions
  • Sends failure messages to a configurable list of email addresses
  • Sends warning message, if the backup server run out of disk space
  • Installs an optional watchdog on the source server for the case the backupserver fails
  • Watchdog sends warning, if an expected backup did not run
  • Watchdog sends a daily reminder message, if the error continues unchecked
  • Option to display current status of all jobs showing times of last and next run
  • Status can be mailed on a daily, weekly or monthly schedule
  • Option to display reports of all stored backups shown size, tranferred volume, disk usage and more
  • Report can be sent to the configured email addresses
  • Option to send the public DSA key to the source server
  • Option to rise the backup server to a production server from a backup. For SME only
  • The rise option does not physically move data and therefore is extremly fast and needs no disk space
  • Rise option can be run remotely as the ethernet drivers of the backup server are preserved
  • Compares installed RPMs on source with backup server. Sends warning message, if not in sync
  • Undo rise option to restore the backup server
  • Configurable via a e-smith style db, with one record for each job and a default record for all jobs
  • Logs in /var/log/affa with optional debug switch for high verbosity
  • Log files are rotated weekly, with 5 logs kept



Download and Installation

Download the smeserver-affa package from one of the SME Server contrib mirrors.
Download the perl-Filesys-DiskSpace package from DAG or from one of the mirrors above.
Install the RPMs.

Quick start example

You have a SME 7 production server with hostname 'prodbox‘ and IP 10.200.48.1.
Set up a second SME 7 box as your backupserver with hostname 'affabox‘ and IP 10.200.48.2.

  1. log into the 'affabox' and install the packages as described above.
  2. generate the DSA keys and send the public key to the 'prodbox'
    # affa --send-keys 10.200.48.1
  3. copy the config helper script sample
    # cp /usr/lib/affa/jobconfig-sample.pl /root/prodbox-job.pl
  4. edit /root/prodbox-job.pl and set
    my $jobname='prodbox';
    and
    'remoteHostName‘=>'10.200.48.1',
  5. write the configuration
    # /root/prodbox-job.pl
  6. run the job manually
    # affa --backup prodbox

Configuration

The configuration is stored in an e-smith style database. Use the db command to configure Affa. The jobname is the record key with the type 'job'.
To setup a new job enter:
# db affa set myprodsrv job
then set the properties
# db affa setprop myprodsrv remoteHostName 192.168.1.1
# db affa setprop myprodsrv TimeSchedule '0030,0730,1130,1330,1730,2030'
# db affa setprop myprodsrv Description 'My Production Server'
# db affa setprop myprodsrv status enable
and so on...

Alternatively you can you use a script as described above in the 'Quick start' chapter.

To verify your work, type:
# db affa show myprodsrv

Affa configuration properties

Property Value Description
remoteHostName FQHN or IP of the source host
TimeSchedule HHMM,HHMM,... doesn't need to be ordered. At least one time is mandatory
Description text string
scheduledKeep integer >= 2 how many of the scheduled should be kept
dailyKeep
weeklyKeep
monthlyKeep
yearlyKeep 		integer >= 1 how many of the daily, weekly, monthly or yearly backups should be kept
SMEServer yes or no when set to yes the default e-smith directories are automatically included and the properties RPMCheck and Watchdog can be used
Include[0]
Include[1]
... 		full path additional files or directories to include
Exclude[0]
Exclude[1]
... 		full path additional files or directories exclude from backup
RPMCheck yes or no compares the packages installation of the source host with this affa backup host. Sends a message with diff list if not in sync. This check is usefull, if you want have the option to rise the backup server to a production server from a backup.
DiskSpaceWarn strict or normal or risky or none run a disk space check after a job has been completed. With level 'strict' a warning message will be sent, if the available space is less then the size of the just completed backup. With level 'normal'/'risky' the message is sent, if less than 50%/10% of the backup size is still available.
localNice -19...+19 run rsync local process niced.
remoteNice -19...+19 run rsync process on source niced.
Watchdog yes or no when a job is started, affa installs a watchdog script on the source in /etc/cron.d/, which sends a warning message, if the next scheduled job (taken from the TimeSchedule property + 10 minutes) did not run. This guarantees, that you will be notfied even in case of a affa server outage. The watchdog script send a daily reminder message, if the error continues. The next run job replaces the watchdog script with a new trigger time.
ConnectionCheckTimeout seconds before the rsync is started on the remote source host, affa check the ssh conncetion and exits with an error after the configured time, if the host does not response.
rsyncTimeout seconds Rsync exits, if no data is transferred for the configured time. This avoids infinitely hanging in case of a network error.
rsyncCompress yes or no compress the tranferred data. May be useful with slow internet connections. Increases CPU load on source and backup host.
EmailAddresses name@domain.com,name@domain.com,... comma separated list of mail addresses where the messages should be sent to
AutomountDevice
AutomountPoint 		full path Device and mountpoint of backup device (e.g. USB disk). Device is automounted before a job starts and unmounted after job completion. With both properties empty no automount is done.
preJobCommand
postJobCommand 		full path programs (local on the affa server) to be executed before/after a job run. The jobname and type (scheduled, daily etc.) are passed as arguments to the program. The exit code is additionally passed to the post job command program. See /usr/lib/affa/ for sample perl scripts.
RootDir full path where to store the backup archives, Do not use /home/e-smith or /root as these are included in the backup and therefore the rise otpion will not work! Recommended: /var/affa
Debug yes or no set to yes to increase log verbosity
status enabled or disabled with set to disabled, no cron entries will made. You can still run a job manually.
rsync--inplace yes or no set to no, if the rsync versionon the source does not support this option (like rsync on SME6)

Example setups

Standard

Dedicated Affa server to backup all production servers
...

Local Affa server plus a Affa server in remote location

  1. Standard setup
    ...
  2. Chained setup
    ...

Backup single ibays

Suppose you want to backup the ibays 'staff1' and 'staff2' on your production server with WAN IP 82.123.1.1 to an Affa server in a different location over the internet every night at 2:30am.

  1. log into the Affa server and install the packages as described above.
  2. generate the DSA keys and send the public key to the production server
    # affa --send-keys 82.123.1.1
  3. copy the config helper script sample
    # cp /usr/lib/affa/jobconfig-sample.pl /root/ibay-staff-job.pl
  4. edit /root/ibay-staff-job.pl and set
    my $jobname='ibay-staff';
    and
    'remoteHostName‘=>'82.123.1.1',
    'TimeSchedule'=>'0230',
    'SMEServer'=>'no',
    'Include[0]'=>'/home/e-smith/files/ibays/staff1',
    'Include[1]'=>'/home/e-smith/files/ibays/staff2',
  5. write the configuration
    # /root/ibay-staff-job.pl
  6. check next morning
    # affa --status
    # ls /var/affa/ibay-staff


Two production servers backup each other

...

Moving a SME 7 server installation to a new hardware using Affa with rise feature

...

Use Affa to backup to a NFS-mounted NAS or a local attached USB drive

You want to backup your SME 7 production server with hostname 'prodbox‘ and IP 10.200.48.1 on a mounted filesystem instead of setting up a dedicated Affa box.

Setup NAS

You have a FreeNAS box with IP 10.200.48.2 up and running with NFS service enabled for your network 10.200.48.0/22. The RAID array is mounted to /mnt/affashare.

  1. log into the 'prodbox' and install the NFS packages
    yum --enablerepo=base install nfs-utils
    You don't need to signal post-upgrade or reboot event.
  2. mount the NFS share
    mkdir -p /mnt/affadevice
    mount 10.200.48.2:/mnt/affashare /mnt/affadevice
Alternatively setup a USB drive
  1. log into the 'prodbox'
  2. Connect a USB hard disk to the USB Bus. Now you must determine what device the kernel has assigned to the drive. View the /var/log/message and search for Initializing USB Mass Storage driver. A few lines below you'll find the name of the device. In this example it is sdc. Replace /dev/sdc by your device in following instructions.
  3. Use the fdisk program to create a linux partition
    # fdisk /dev/sdc
    You'll most likely find an existing vfat dos partition, which you have to delete first. In the following we assume, that you have created a single partition /dev/sdc1.
  4. Now format the drive with an ext3 filesystem
    mkfs.ext3 /dev/sdc1
  5. Make the mount point
    # mkdir -p /mnt/affadevice
  6. Add the following line to the /etc/fstab
    /dev/sdc1 /mnt/affadevice ext3 defaults
  7. Mount the drive
    mount /mnt/affadevice
  8. Crosscheck your work using the df command
    # df
Setup Affa

You want to run backups on 11:30 h, 15:30 h and 19:30 h and you want to keep the last 3 scheduled backups, 7 daily, 5 weekly, 12 monthly and 1 yearly backups.

  1. log into the 'prodbox' and install the Affa packages as described above.
  2. copy the config helper script sample
    # cp /usr/lib/affa/jobconfig-sample.pl /root/prodbox-job.pl
  3. edit /root/prodbox-job.pl and set
    my $jobname='prodbox';
    and
    'remoteHostName‘=>'localhost',
    'TimeSchedule'=>'1130,1530,1930',
    'scheduledKeep'=>3,
    'dailyKeep'=>7,
    'weeklyKeep'=>5,
    'monthlyKeep'=>12,
    'yearlyKeep'=>1,
    'RootDir=>'/mnt/affadevice',
    Review the other properties and change them to your needs.
  4. write the configuration
    # /root/prodbox-job.pl
  5. run the job manually
    # affa --backup prodbox
Limitations

Whith this kind of setup you cannot use the affa rise feature, as it requires the backup archive to be located on the same fileystem as the server installation. The rise option uses hardlinks, which are not working across filesystems.

Restore

Restore a single files or directory

...

Full restore

To run a full restore of user and configuration data run on the Affa server
# affa --full-restore <JOB> [<ARCHIVE>]

Example:
You have backuped your production server 'prodsrv' as job 'myprodsrv'. To restore from the latest backup run
# affa --full-restore myprodsrv

To restore from the older archive daily.2 run
# affa --full-restore myprodsrv daily.2

Important note: A full restore reconstruct the server as it was at the time of the backup. That means, files created or server configuration changes after the backup run will be lost.

Files

/sbin/e-smith/affa
/etc/cron.d/affa-status
/etc/cron.d/affa
/etc/logrotate.d/affa
/usr/lib/affa/jobconfig-sample.pl
/usr/lib/affa/postJobCommand-sample.pl
/usr/lib/affa/preJobCommand-sample.pl



Additional information

Backup a old SME 6 server

To backup a SME 6 server set the property 'rsync--inplace' to 'no' and install the perl-TimeDate package on the SME 6 box. The perl-TimeDate package is needed by the watchdog script running on the SME 6. Use the RPM from DAG: perl-TimeDate-1.16-0.rh73.dag.noarch.rpm

Performance

It is hardly to predict how much time a backup job needs to complete. It depends on the number of files, the total file size, the file changes since last run, the network speed and not least on the CPU power, disk speed and RAM of the source and backup server. The following table of measured values will give you an idea of what you can expect.

Backup server Source server Data on source server Transferred Data Connection Compression Affa run time
2x3.2GHz Xeon
2 GB RAM, 1.5 TB RAID6 		2x3.2GHz Dual Core Xeon
4 GB RAM, RAID5, SME 7.1
Intranet Web Server + MySQL		 1.4 GB, 12,000 files 300 MB, 16 files Internet 2 Mbit yes 2 minutes
2x3.2GHz Xeon
2 GB RAM, 1.5 TB RAID6 		2x3.2GHz Dual Core Xeon
4 GB RAM, RAID5
SME 7.1 Mailserver		 43 GB, 410,000 files 140 MB, 2,700 files Internet 2 Mbit yes 10 minutes
2x2GHz Dual Core Xeon 5130
6 GB RAM, 1 TB RAID 5 		2x2GHz Dual Core Xeon 5130
6 GB RAM, 1 TB RAID 5
SME 7.1 File- and Mailserver		 125 GB, 98,000 files 3,2 GB, 3,000 files Gbit LAN no 25 minutes
2x2GHz Dual Core Xeon 5130
6 GB RAM, 874 GB RAID 5 		2x2GHz Dual Core Xeon 5130
6 GB RAM, 1 TB RAID 5
SME 7.1 File- and Mailserver		 125 GB, 98,000 files 3.5 GB, 2000 files Internet 2 Mbit yes 17 minutes
2x800MHz Pentium 3
1 GB RAM, 300 GB RAID1 		2x2.8GHz Xeon,
1GB RAM, 140 GB RAID5
SME 7.1 File- and Mailserver		 39 GB, 370,000 files 12 GB, 4,000 files 100Mbit LAN no 52 minutes

Note: The last action of a job run is to remove the oldest backup, e.g. if archive scheduled.11 exists and you have set the scheduledKeep property to 12, then it must be deleted. This can take a significant long time, which increases the total job execution time.

Changelog

* Mon Apr 30 2007 Michael Weinberger

- Version 0.1.3
  modified 'use constant* syntax in watchdog script for compatibility with perl 5.6 on SME6


* Fri Apr 27 2007 Michael Weinberger

- Version 0.1.2
  Bugfix: Preserve of ethernet driver setting with --rise did not work.
  Also preserve NIC bonding.


* Mon Apr 23 2007 Michael Weinberger

- Version 0.1.1
  scheduledKeep must be>=2 for --link-dest
  set scheduledKeep to 2 if <2
- get lastrun date from affa-report rather than from report file
- added auto mount function
- added AutomountDevice and AutomountPoint to jobconfig-sample.pl

* Wed Apr 18 2007 Michael Weinberger

- Version 0.0.8
  dont die if report db does not exist

* Wed Apr 18 2007 Michael Weinberger

- Version 0.0.7
  run checkConnection() only for scheduled backups
  added Size and Disk usage information to --status

* Sun Apr 15 2007 Michael Weinberger

- Version 0.0.6
  added --full-restore
  missing check for HOSTNAME argument in --send-keys added

* Thu Apr 12 2007 Michael Weinberger

- Version 0.0.5
  fixed calculation of lastrun-now

* Thu Apr 12 2007 Michael Weinberger

- Version 0.0.4
- added --send-status plus templates 
- fixed format error of times in affa --status
- show 'failed', if lastrun is older 1 day in affa --status 
- fixed typo. default status=disabled (was disable)

* Fri Apr 06 2007 Michael Weinberger

- Version 0.0.3
- watchdog reminder was not deleted on soure
- wrong version mismatch list in  rpm compare

* Thu Apr 05 2007 Michael Weinberger

- added 'rsync--inplace' property

* Mon Apr 02 2007 Michael Weinberger

- initial release

Source RPM

Affa SRPM

Acronym

Affa stands for Automatische Festplatten Fernarchivierung

Retrieved from "https://wiki.koozali.org/index.php?title=Affa&oldid=3464"