Difference between revisions of "Monitor Disk Health"
RayMitchell (talk | contribs) (updated) |
|||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 9: | Line 9: | ||
Errors are emailed admin if and when they are found. | Errors are emailed admin if and when they are found. | ||
| + | |||
| + | If you receive an email indicating problems, then you should manually run tests & view the report & take appropriate action (eg replace drive if necessary). | ||
| + | |||
To manually check disks | To manually check disks | ||
Generate report | Generate report | ||
| − | smartctl -t short /dev/ | + | smartctl -t short /dev/sda (1 minute) |
| − | smartctl -t long /dev/ | + | smartctl -t long /dev/sda (1 hour) |
| + | smartctl -t conveyance /dev/sda (5 minutes) | ||
View report | View report | ||
| − | smartctl -a /dev/ | + | smartctl -a /dev/sda |
| + | |||
| + | |||
| + | For additional information see: | ||
| + | |||
| + | http://linuxcommand.org/man_pages/smartd8.html | ||
| − | http:// | + | http://linux.die.net/man/8/smartctl |
| − | |||
Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T. | Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T. | ||
| − | <noinclude>[[Category:Howto]]</noinclude> | + | <noinclude>[[Category:Howto]][[Category:Administration:Monitoring]]</noinclude> |
Latest revision as of 16:50, 1 November 2015
Monitor Disk Health
Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.
To enable
config setprop smartd status enabled
And start, (smartd will start automatically on a reboot if enabled)
/etc/rc.d/init.d/smartd start
Errors are emailed admin if and when they are found.
If you receive an email indicating problems, then you should manually run tests & view the report & take appropriate action (eg replace drive if necessary).
To manually check disks
Generate report
smartctl -t short /dev/sda (1 minute) smartctl -t long /dev/sda (1 hour) smartctl -t conveyance /dev/sda (5 minutes)
View report
smartctl -a /dev/sda
For additional information see:
http://linuxcommand.org/man_pages/smartd8.html
http://linux.die.net/man/8/smartctl
Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T.
