Difference between revisions of "Talk:Zarafa"

From SME Server
Jump to navigationJump to search
(Restarting httpd-e-smith)
m (Added information on updating php-mapi if upgraded php to version 5.3)
 
(139 intermediate revisions by 10 users not shown)
Line 1: Line 1:
−
== Rough Guide to get Zarafa running. Lots more to do... ==
+
=== Zarafa7 on SME8 ===
−
http://forums.contribs.org/index.php?topic=42118.0
+
If you want to test the new Zarafa 7 version on SME8b6: install as described [[Zarafa | here]], download the needed files from [[bugzilla:5789]] => Comment#5 and extract as described, make the following symbolic links and restart apache:
 +
ln -s /lib/libcrypto.so.0.9.8e /usr/lib/libcrypto.so.0.9.8
 +
ln -s /lib/libssl.so.0.9.8e /usr/lib/libssl.so.0.9.8
 +
sv t httpd-e-smith
  
−
===Download & Install===
+
=== Dependancies ===
  
−
http://www.zarafa.com/download-community
+
Here are links to all the dependencies that I used for version 7.0.1.28479 (free):
 +
libicu - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/libicu-3.6-5.16.i386.rpm
 +
poppler-utils - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/poppler-utils-0.5.4-4.4.el5_6.17.i386.rpm
 +
poppler - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/poppler-0.5.4-4.4.el5_6.17.i386.rpm
 +
hicolor-icon-theme - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/hicolor-icon-theme-0.9-2.1.noarch.rpm
 +
bitstream-vera-fonts - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/bitstream-vera-fonts-1.10-7.noarch.rpm
 +
w3m - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/w3m-0.5.1-18.el5.i386.rpm
  
−
Distribution = Rhel 4
+
If you are upgrading from version 6 you will also need these dependencies:
 +
MySQL-python - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/MySQL-python-1.2.1-1.i386.rpm
 +
mx - http://mirror.centos.org/centos/5/os/i386/CentOS/mx-2.0.6-2.2.2.i386.rpm
  
−
tar -zxvf zarafa-6.20-rhel4-i386.tar.gz
+
- Garth Kirkwood (girkers)
  
−
yum localinstall libvmime*.rpm libical*.rpm zarafa-6*.rpm zarafa-webaccess-6*.rpm
+
=== Installation ===
  
−
===Create the Database===
+
To make things a bit more easy for non Zarafa experts, I used this procedure for a clean install.
 +
Get zcp 7.01, unpack, remove the devel packages and install all rpm's:
 +
yum localinstall *.rpm
 +
All packages have dependencies that cannot be resolved if you install only part of the rpm's (as suggested installation instruction for zcp 6.40).
  
−
mysqladmin create zarafa
+
Then install smeserver-zarafa. I could not retrieve this file from the smevdev repository (sme8 uses another one?).
−
  mysql -e "grant all privileges on zarafa.* to zarafa@localhost identified by 'yourpassword'"
+
Get it manually and install:
−
  mysql -e "flush privileges"
+
  wget http://ftp.nluug.nl/os/Linux/distr/smeserver/releases/7/smedev/i386/RPMS/smeserver-zarafa-0.9.0-53.el4.sme.noarch.rpm
 +
  yum localinstall smeserver-zarafa-0.9.0-53.el4.sme.noarch.rpm
  
−
===Zarafa config files===
+
/etc/e-smith/events/actions/zarafa-install
  
−
nano /etc/zarafa/server.cfg
+
expand the php-mapi patch patch and and the symbolic links (see first text block above: Zarafa7 on SME8).
−
  mysql_user = zarafa
 
−
  mysql_password = 'yourpassword'
 
−
  mysql_database = zarafa
 
−
 
−
  user_plugin        = unix
 
−
  user_plugin_config = /etc/zarafa/unix.cfg
 
−
 
 
−
nano /etc/zarafa/unix.cfg
 
−
  default_domain = yourserver.net
 
−
  min_user_uid = 5000
 
−
  min_group_gid = 5000
 
−
 
 
−
===SME templates===
 
−
 
 
−
====httpd.conf====
 
−
 
 
−
mkdir -p /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf
 
−
 
 
−
nano /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/86ZarafaAlias
 
−
  Alias /zarafa /var/www/html/webaccess/
 
−
  <Directory /var/www/html/webaccess/>
 
−
  Options -Indexes
 
−
  AllowOverride None
 
−
  order allow,deny
 
−
  allow from all
 
−
  AddType application/x-httpd-php .php
 
−
  php_flag magic_quotes_gpc off
 
−
  php_flag track_vars on
 
−
  </Directory>
 
−
 
 
−
expand-template /etc/httpd/conf/httpd.conf
 
  
−
====php.ini====
+
If you use webaccess mobile, change 86ZarafaAlias template [[bugzilla:6552]]
  
−
  mkdir -p /etc/e-smith/templates-custom/etc/php.ini
+
If you use z-push, download and install (see [[Zarafa | here]] mobile synchronization).
 +
You have to change the name of the installation folder from z-push<version #> to z-push, because this is expected by the smeserver-zarafa package.
 +
The download extracts correctly but leaves the file and group ownership to some unknown user 33. I changed that (might not be necessary, I consider it a small security risk).
 +
  chown -R root:root /var/www/html/z-push
  
−
nano /etc/e-smith/templates-custom/etc/php.ini/99Zarafa
+
Then post-upgrade and restart.  
−
  extension = mapi.so
 
  
−
  expand-template /etc/php.ini
+
For upgrades (tested with 6.40.2): zarafa-server does not start, there is an error message in the /var/log/zarafa/zarafa-server.log file which tells you to update the database first. A python script is provided to do just that. See also [[http://doc.zarafa.com/7.0/Administrator_Manual/en-US/html/upgrading.html zarafa administration manual]]!
−
 
+
Stop running zarafa services, make sure a backup of the zarafa mysql database exists, install MySQL-python, run update script.  
−
Restart httpd
 
−
 
 
−
signal-event ibay-modify
 
−
 
 
−
====.qmail====
 
−
enable zarafa for a user
 
−
db accounts setprop xxxx EmailForward zarafa  ### required to disable local delivery
 
−
 
 
−
mkdir -p /etc/e-smith/templates-user-custom/.qmail
 
−
nano -w /etc/e-smith/templates-user-custom/.qmail/80Zarafa
 
 
   
 
   
−
  {
+
  yum install MySQL-python
−
    my $zarafa = $user->prop('EmailForward') || 'local';
 
−
 
−
    return "| /usr/bin/zarafa-dagent -q $USERNAME"
 
−
            if ($zarafa eq 'zarafa');
 
−
}
 
  
−
  /etc/e-smith/events/actions/qmail-update-user
+
  python /usr/share/doc/zarafa/zarafa7-upgrade
  
−
===Other tasks===
+
Reports the script failes with wrong inno_db settings for mysql are on the zarafa forums. So verify your local MySQL innodb settings match the required values [[http://doc.zarafa.com/7.0/Administrator_Manual/en-US/html/_memory_usage_setup.html zarafa administration manual]]). 
−
Change webaccess apache rights
 
  
−
chown -R www:www /var/www/html/webaccess/tmp
+
===Sogo===
  
−
Configure Zarafa services and add links for auto start
+
FYI, I'm now using [[Sogo]] instead of zarafa, hence I have stopped work on smeserver-zarafa.
  
−
config set zarafa-server service status enabled
+
Sogo may not be as complete as zarafa, but is simpler to intergrate/maintain and will likely have a wider usage.
−
config set zarafa-spooler service status enabled
 
−
ln -s /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S99zarafa-server
 
−
ln -s /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S99zarafa-spooler
 
  
−
Start Zarafa services
+
[[User:Snoble|Snoble]] 01:59, 14 March 2010 (UTC)
  
−
/etc/init.d/zarafa-server start
+
I will mantain it for now, Paul Floor
−
/etc/init.d/zarafa-spooler start
 
  
−
Create Zarafa public store
+
=== Suggestions===
 +
If you can advise on standard configuration, please make it a bug so it is added to the rpm
  
−
/usr/bin/zarafa-admin -s
+
[[User:Snoble|Snoble]] 07:32, 22 December 2008 (UTC)
  
−
Assigning an administrator
 
  
−
When a user is an administrator, the user will be allowed to open all Zarafa stores of any user.
+
=== smeserver-zarafa-0.9-48===
  
−
List users:
+
/etc/e-smith/events/actions/zarafa-services-stop has been removed
−
/usr/bin/zarafa-admin -l
 
  
−
Update a user to admin status:
+
  /etc/e-smith/events/actions/zarafa-services
−
  /usr/bin/zarafa-admin -u <username> -a 1
+
Usage: start|stop|restart|enabled|disabled
 +
 +
start services
 +
stop services
 +
restart services
 +
enabled - set db values to enabled, zarafa will start on reboot
 +
disabled - set db values to disabled, zarafa won't start on reboot
  
−
===Usage===
 
−
After implementing the .qmail fragment mail is sent to zarafa, and NOT the users ~\Maildir
 
  
−
====Webmail====
+
InnoDB support is enabled automatically, we need to add this note later
−
Access with browser for a local user
 
  
−
* http://serverip/zarafa
+
{{Note box| InnoDB support in MySql has been enabled in order to get zarafa-server running, for details see [[MySQL#Enable_InnoDB_engine]]}}
−
 
 
−
====Windows Clients====
 
−
 
 
−
* MS Outlook using zarafaclient-*.msi add-on contained in the win32 directory of zarafa-*.tar.gz
 
−
 
 
−
====Imap & POP====
 
−
UNTESTED
 
−
 
 
−
Edit the config file
 
−
 
 
−
nano /etc/zarafa/gateway.cfg
 
−
 
 
−
Start the service
 
−
 
 
−
/etc/init.d/zarafa-gateway start
 
−
 
 
−
====Mobiles====
 
−
UNTESTED
 
−
 
 
−
Install rpm, start service, configure
 
−
 
 
−
===Issues===
 
−
 
 
−
====Backup====
 
−
*Either change the install location of the mail stores so they are backed up, requires using rpm -Uvh with a switch, not yum
 
−
*Or document what directories to add to backups
 
−
 
 
−
====.qmail fragment====
 
−
* fragment now called .qmail/80Zarafa to allow for SME forwarding
 
−
 
 
−
* mailsorting contrib sorts to Maildir folders, zarafa won't see this mail. Disable procmail/mailsorting and re-create internal zarafa rules
 
−
 
 
−
====Restarting httpd-e-smith====
 
−
Eg. modifying an ibay, causes a problem with webaccess
 
−
 
 
−
tail /var/log/messages
 
−
<snip>
 
−
Sep 28 16:30:27 kiwi httpd: PHP Warning:  Function registration failed - duplicate name - mapi_zarafa_getuser in Unknown on line 0
 
−
Sep 28 16:30:27 kiwi httpd: PHP Warning:  Function registration failed - duplicate name - mapi_zarafa_getgroup in Unknown on line 0
 
−
Sep 28 16:30:27 kiwi httpd: PHP Warning:  mapi:  Unable to register functions, unable to load in Unknown on line 0
 
−
 
−
workaround is to
 
−
sv restart httpd-e-smith
 
  
−
====Address book====
+
=== zarafa-6.40 ===
−
The Zarafa global address book finds users and groups from /etc/passwd etc/group
 
  
−
We don't want machine names, ibays, system, the group of a user, maybe others.  
+
yum localinstall libvmime-0*.rpm libical-0*.rpm zarafa-*.rpm catdoc-*.rpm
−
I don't see how to hide them, changing shell to /bin/false may break things
 
  
−
====Folder Naming====
+
==== indexing service ====
−
SME and Zarafa use different folder naming. To enhance migration SME folders should be renamed prior to migration.
 
  
−
drafts > Drafts
+
The catdoc-rpm is needed for the new [http://www.zarafa.com/news/26-jan-zarafa-releases-community-version-its-collaboration-platform-640 indexing service] that is introduced with Zarafa 6.40... but the indexing-service is not yet handled by smeserver-zarafa. --[[User:Jester|jester]] 15:42, 13 February 2010 (UTC)
−
junkmail > Junk E-mail
 
−
sent-mail > Sent Items
 
−
trash > Deleted Items
 
  
−
====Migrating users and data to Zarafa====
+
the catdoc rpm has un meet dependencies on SME 7 so it's only listed on discussion not the main page,
−
Zarafa migration whitepaper describes various ways of migrating your users and your data to a Zarafa server.
 
  
−
http://download.zarafa.com/zarafa/release/docs/zarafa_migration.en.pdf
+
yes it's not implemented yet, it'll only be implemented in sme8 unless others find the dependencies
  
−
====Performing IMAP migration from SME/IMAP to Zarafa/IMAP====
+
[[User:Snoble|Snoble]] 01:13, 20 February 2010 (UTC)
  
−
Configure zarafa-gateway for migration enabling IMAP on port 144 only
+
Dependencies are poppler and poppler-utils.  Available here:
  
−
nano /etc/zarafa/gateway.cfg
+
ftp://ftp.pbone.net/mirror/apt.kde-redhat.org/kde-redhat/redhat/4/i386/RPMS.stable/poppler-0.5.4-0.3.el4.i386.rpm
−
  pop3_enable    =      no
 
−
  pop3s_enable    =      no
 
−
  imap_enable    =      yes
 
−
  imap_port      =      144
 
−
  imaps_enable    =      no
 
  
−
Start the service
+
ftp://ftp.pbone.net/mirror/apt.kde-redhat.org/kde-redhat/redhat/4/i386/RPMS.stable/poppler-utils-0.5.4-0.3.el4.i386.rpm
  
−
  /etc/rc.d/init.d/zarafa-gateway start
+
NOTE: Some poppler versions have been identified with security issues. I didn't have time to look into this version.
  
−
Get imapsync and required perl module
+
Paul Floor.
  
−
wget http://dag.wieers.com/rpm/packages/perl-Mail-IMAPClient/perl-Mail-IMAPClient-2.2.9-1.2.el4.rf.noarch.rpm
+
=== SME 8 beta ===
−
yum localinstall perl-Mail-IMAPClient-2.2.9-1.2.el4.rf.noarch.rpm
 
  
−
wget http://www.linux-france.org/prj/imapsync/dist/imapsync-1.264.tgz
+
==== php 5.2.10 ====
−
tar -zxvf imapsync-1.264.tgz
 
−
cd ./imapsync-1.264
 
−
make install
 
  
−
Perform a user mail sync from SME/IMAP (host1/port1) to Zarafa/IMAP (host2/port2)
+
The php mapi files zarafa uses are compiled against 5.1.6, if sme 8 uses 5.2.10 we have a problem
  
−
imapsync --noauthmd5 --host1 localhost --port1 143 --user1 <username> --password1 <password> --sep2 / --prefix2 "" --host2 localhost --port2 144 --user2 <username> --password2 <password>
+
here is one workaround http://forums.zarafa.com/viewtopic.php?f=9&t=3263&p=18753#p18753
  
−
Example to synchronize a user named 'bob' with password 'bob123' from SME IMAP into Zarafa:
+
I found with the mapi error that I was getting was caused by my upgrade, PHP wouldn't start as the file libvmime.so.0 was missing or something rather (log no longer has the message). How I fixed my issue was I deleted the symlink in the /usr/lib/libvmime.so.0 which pointed to ...libvmime.0.7.1.so which is deleted when you upgrade the packages for version 7. I then "reinstalled" libvmime-0.9.2+... and restarted the httpd damaen and all was right with the world. -- girkers
  
−
imapsync --noauthmd5 --host1 localhost --port1 143 --user1 bob --password1 bob123 --sep2 / --prefix2 "" --host2 localhost --port2 144 --user2 bob --password2 bob123
+
==== php 5.3 ====
 +
If you update your system against the testing repo, it will update php to version 5.3 and thus break things again. To fix the mapi error this time, I uninstalled php-mapi that was included with zarafa (I was using 7.0.1.28479 that was included with zarafa) and this also removes the two dependencies of zarafa-webaccess and zarafa-webaccess-mobile (if they are installed). I then downloaded an updated php-mapi, installed it and then reinstalled the webaccess rpms and restarted the httpd and all good again. - Girkers
  
−
After syncing is complete, stop zarafa-gateway service and/or edit /etc/zarafa/gateway.cfg to meet your needs.
+
The steps I did were:
 +
cd /tmp
 +
wget ftp://ftp.pbone.net/mirror/download.fedora.redhat.com/pub/fedora/epel/5/i386/php53-mapi-7.0.1-1.el5.i386.rpm
 +
yum erase php-mapi
 +
yum localinstall php53-mapi-7.0.1-1.el5.i386.rpm
 +
cd zcp-[your version of zarafa]
 +
yum localinstall zarafa-webaccess-*
 +
sv t httpd-e-smith

Latest revision as of 07:26, 4 October 2011

Zarafa7 on SME8

If you want to test the new Zarafa 7 version on SME8b6: install as described here, download the needed files from bugzilla:5789 => Comment#5 and extract as described, make the following symbolic links and restart apache: 

ln -s /lib/libcrypto.so.0.9.8e /usr/lib/libcrypto.so.0.9.8
ln -s /lib/libssl.so.0.9.8e /usr/lib/libssl.so.0.9.8
sv t httpd-e-smith

Dependancies

Here are links to all the dependencies that I used for version 7.0.1.28479 (free): 

libicu - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/libicu-3.6-5.16.i386.rpm
poppler-utils - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/poppler-utils-0.5.4-4.4.el5_6.17.i386.rpm
poppler - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/poppler-0.5.4-4.4.el5_6.17.i386.rpm
hicolor-icon-theme - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/hicolor-icon-theme-0.9-2.1.noarch.rpm
bitstream-vera-fonts - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/bitstream-vera-fonts-1.10-7.noarch.rpm
w3m - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/w3m-0.5.1-18.el5.i386.rpm

If you are upgrading from version 6 you will also need these dependencies: 

MySQL-python - ftp://ftp.pbone.net/mirror/ftp.centos.org/5.7/os/i386/CentOS/MySQL-python-1.2.1-1.i386.rpm
mx - http://mirror.centos.org/centos/5/os/i386/CentOS/mx-2.0.6-2.2.2.i386.rpm

- Garth Kirkwood (girkers)

Installation

To make things a bit more easy for non Zarafa experts, I used this procedure for a clean install. Get zcp 7.01, unpack, remove the devel packages and install all rpm's: 

yum localinstall *.rpm

All packages have dependencies that cannot be resolved if you install only part of the rpm's (as suggested installation instruction for zcp 6.40).

Then install smeserver-zarafa. I could not retrieve this file from the smevdev repository (sme8 uses another one?). Get it manually and install: 

wget http://ftp.nluug.nl/os/Linux/distr/smeserver/releases/7/smedev/i386/RPMS/smeserver-zarafa-0.9.0-53.el4.sme.noarch.rpm
yum localinstall smeserver-zarafa-0.9.0-53.el4.sme.noarch.rpm

/etc/e-smith/events/actions/zarafa-install

expand the php-mapi patch patch and and the symbolic links (see first text block above: Zarafa7 on SME8).

If you use webaccess mobile, change 86ZarafaAlias template bugzilla:6552

If you use z-push, download and install (see here mobile synchronization). You have to change the name of the installation folder from z-push<version #> to z-push, because this is expected by the smeserver-zarafa package. The download extracts correctly but leaves the file and group ownership to some unknown user 33. I changed that (might not be necessary, I consider it a small security risk). 

chown -R root:root /var/www/html/z-push

Then post-upgrade and restart.

For upgrades (tested with 6.40.2): zarafa-server does not start, there is an error message in the /var/log/zarafa/zarafa-server.log file which tells you to update the database first. A python script is provided to do just that. See also [zarafa administration manual]! Stop running zarafa services, make sure a backup of the zarafa mysql database exists, install MySQL-python, run update script. 

yum install MySQL-python

python /usr/share/doc/zarafa/zarafa7-upgrade

Reports the script failes with wrong inno_db settings for mysql are on the zarafa forums. So verify your local MySQL innodb settings match the required values [zarafa administration manual]).

Sogo

FYI, I'm now using Sogo instead of zarafa, hence I have stopped work on smeserver-zarafa.

Sogo may not be as complete as zarafa, but is simpler to intergrate/maintain and will likely have a wider usage.

Snoble 01:59, 14 March 2010 (UTC)

I will mantain it for now, Paul Floor

Suggestions

If you can advise on standard configuration, please make it a bug so it is added to the rpm

Snoble 07:32, 22 December 2008 (UTC)


smeserver-zarafa-0.9-48

/etc/e-smith/events/actions/zarafa-services-stop has been removed 

/etc/e-smith/events/actions/zarafa-services
Usage: start|stop|restart|enabled|disabled

start services
stop services
restart services
enabled - set db values to enabled, zarafa will start on reboot
disabled - set db values to disabled, zarafa won't start on reboot


InnoDB support is enabled automatically, we need to add this note later


Important.png Note:
InnoDB support in MySql has been enabled in order to get zarafa-server running, for details see MySQL#Enable_InnoDB_engine


zarafa-6.40

yum localinstall libvmime-0*.rpm libical-0*.rpm zarafa-*.rpm catdoc-*.rpm

indexing service

The catdoc-rpm is needed for the new indexing service that is introduced with Zarafa 6.40... but the indexing-service is not yet handled by smeserver-zarafa. --jester 15:42, 13 February 2010 (UTC)

the catdoc rpm has un meet dependencies on SME 7 so it's only listed on discussion not the main page,

yes it's not implemented yet, it'll only be implemented in sme8 unless others find the dependencies

Snoble 01:13, 20 February 2010 (UTC)

Dependencies are poppler and poppler-utils. Available here:

ftp://ftp.pbone.net/mirror/apt.kde-redhat.org/kde-redhat/redhat/4/i386/RPMS.stable/poppler-0.5.4-0.3.el4.i386.rpm

ftp://ftp.pbone.net/mirror/apt.kde-redhat.org/kde-redhat/redhat/4/i386/RPMS.stable/poppler-utils-0.5.4-0.3.el4.i386.rpm

NOTE: Some poppler versions have been identified with security issues. I didn't have time to look into this version.

Paul Floor.

SME 8 beta

php 5.2.10

The php mapi files zarafa uses are compiled against 5.1.6, if sme 8 uses 5.2.10 we have a problem

here is one workaround http://forums.zarafa.com/viewtopic.php?f=9&t=3263&p=18753#p18753

I found with the mapi error that I was getting was caused by my upgrade, PHP wouldn't start as the file libvmime.so.0 was missing or something rather (log no longer has the message). How I fixed my issue was I deleted the symlink in the /usr/lib/libvmime.so.0 which pointed to ...libvmime.0.7.1.so which is deleted when you upgrade the packages for version 7. I then "reinstalled" libvmime-0.9.2+... and restarted the httpd damaen and all was right with the world. -- girkers

php 5.3

If you update your system against the testing repo, it will update php to version 5.3 and thus break things again. To fix the mapi error this time, I uninstalled php-mapi that was included with zarafa (I was using 7.0.1.28479 that was included with zarafa) and this also removes the two dependencies of zarafa-webaccess and zarafa-webaccess-mobile (if they are installed). I then downloaded an updated php-mapi, installed it and then reinstalled the webaccess rpms and restarted the httpd and all good again. - Girkers

The steps I did were: 

cd /tmp
wget ftp://ftp.pbone.net/mirror/download.fedora.redhat.com/pub/fedora/epel/5/i386/php53-mapi-7.0.1-1.el5.i386.rpm
yum erase php-mapi
yum localinstall php53-mapi-7.0.1-1.el5.i386.rpm
cd zcp-[your version of zarafa]
yum localinstall zarafa-webaccess-*
sv t httpd-e-smith
Retrieved from "https://wiki.koozali.org/index.php?title=Talk:Zarafa&oldid=15895"