Client Authentication:Debian

	Warning:
	This is based upon limited testing and a small number of users. YMMV

	Skill level: Advanced
	The instructions on this page may require deviations from standard procedures. A good understanding of linux and Koozali SME Server is recommended.

Debian Authentication

Introduction

The following is Debian 5 desktop configuration for SME Server 7.x authentication.

Client Configuration

	Note:
	You need superuser privileges to make the changes.

• Install additional packages:

# aptitude install winbind smbfs libpam-mount

Some files need to be edited:

• /etc/samba/smb.conf

[global]
workgroup = WORKGROUP                      # edit, to your workgroup name
netbios name = debian                      # edit, to your netbios name
server string = %h server (Samba %v)
wins support = no
wins server = 192.168.1.10                 # edit, to your SME Server IP address
dns proxy = no

log level = 1
log file = /var/log/samba/log.%m
max log size = 1000
syslog = 0

security = domain
encrypt passwords = true
obey pam restrictions = yes
invalid users = root
unix password sync = no

load printers = no
disable spoolss = yes
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

winbind use default domain = yes
#winbind separator =
idmap backend = rid:"WORKGROUP=5000-20000" # edit, to your workgroup name
allow trusted domains = No
idmap uid = 5000-20000
idmap gid = 5000-20000
winbind enum users = yes
winbind enum groups = yes
template shell = /bin/bash
# use %U for the user, use %D for the domain
template homedir = /home/%D/%U
#template primary group = users

• /etc/nsswitch

passwd:         files winbind
group:          files winbind
shadow:         compat
hosts:          files wins dns
networks:       files

• /etc/sudoers (for unmounting a user's home directory on logout)

# /etc/sudoers
#
# This file MUST be edited with the 'visudo' command as root.
#
# See the man page for details on how to write a sudoers file.
#

Defaults	env_reset

# Host alias specification 

# User alias specification

# Cmnd alias specification
Cmnd_Alias UMOUNT=/bin/umount

# User privilege specification
root	ALL=(ALL) ALL
ALL		ALL=NOPASSWD: UMOUNT

# Uncomment to allow members of group sudo to not need a password
# (Note that later entries override this, so you might need to move
# it further down)
# %sudo ALL=NOPASSWD: ALL

• /etc/pam.d/common-auth

## allow users with valid unix account or valid winbind account
# success=3 jumps over the next 3 commands
auth    [success=2 default=ignore]      pam_unix.so nullok_secure
auth    [success=1 default=ignore]      pam_winbind.so  use_first_pass
auth    requisite       pam_deny.so
auth    optional        pam_mount.so    use_first_pass
auth	required		pam_group.so	use_first_pass

• /etc/pam.d/common-session

#
# /etc/pam.d/common-session - session-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define tasks to be performed
# at the start and end of sessions of *any* kind (both interactive and
# non-interactive).  The default is pam_unix.
#

session  required     pam_unix.so 
session  optional     pam_mkhomedir.so	silent skel=/etc/skel	umask=0022
session  optional     pam_mount.so

• /etc/pam.d/gdm (re-arranged because of permission problems)

#%PAM-1.0
auth    requisite       pam_nologin.so
auth    required        pam_env.so readenv=1
auth    required        pam_env.so readenv=1 envfile=/etc/default/locale
@include common-auth

@include common-account
session required        pam_limits.so
@include common-session

@include common-password
auth    optional        pam_gnome_keyring.so
session optional        pam_gnome_keyring.so auto_start

• /etc/security/pam_mount.conf.xml

Insert the following under <!-- Volume definitions --> (change the value of 'server'):

<volume fstype="cifs" server="SME_SERVER_NAME" path="homes" mountpoint="~" options="nosuid,nodev,nounix,file_mode=0640,dir_mode=0700" />

Also change:

umount>umount %(MNTPT)</umount>

to:

umount>sudo umount -l %(MNTPT)</umount>

and:

<smbumount>smbumount %(MNTPT)</smbumount>

to:

<smbumount>sudo smbumount %(MNTPT)</smbumount>

• /etc/security/group.conf

Insert the following at the end of the file:

* ; * ; * ; Al0000-2400 ; floppy, video, audio, cdrom, dip, plugdev, users, scanner

• Join the domain (replace WORKGROUP with your workgroup name):

# net join WORKGROUP -S <your_server_name> -U admin

• Restart the winbind daemon:

# /etc/init.d/winbind restart

• Log-out and log-in as domain user.

References

1. basic configuration: http://www.buechse.de/HOWTO/samba_pam_mount_sshd/
2. sound: http://ubuntuforums.org/showpost.php?p=1559682&postcount=7
3. GNOME and libpam-mount: http://www.debian-administration.org/users/dkg/weblog/30
4. sudo: http://anothersysadmin.wordpress.com/2008/04/06/howto-active-directory-authentication-in-ubuntu-804/#comment-330
5. cifs mount syntax: http://wiki.contribs.org/Client_Authentication:Ubuntu#Automount_User_Home_Directories_at_Login
6. "umount -l" in pam_mount.xml.conf: http://www.trilug.org/pipermail/trilug-ontopic/2009-February/000154.html