No other asterisk implementations have been used or tested.
No other asterisk implementations have been used or tested.
It is assumed that you have a working Sail/asterisk installation}}
It is assumed that you have a working Sail/asterisk installation}}
+
==IAXModem for SME Server==
+
{{Level|Medium}}
==Introduction==
==Introduction==
Line 93:
Line 95:
==HylaFax==
==HylaFax==
Install the [[HylaFax|smeserver-hylafax]] contrib.
Install the [[HylaFax|smeserver-hylafax]] contrib.
−
When you run faxsetup, at the end it will ask to continue and run faxaddmodem to setup a modem. Choose ttyIAX as the modem port and continue and set other values as required. Do not reboot or start HylaFax yet.
+
When you run faxsetup, at the end it will ask to continue and run faxaddmodem to setup a modem.
+
Enter 'ttyIAX' as the modem port and continue and set other values as required. The IAXModem should be discovered if it was working OK as above.
+
Do not reboot or start HylaFax yet.
Edit /etc/hylafax/etc/config.ttyIAX and add
Edit /etc/hylafax/etc/config.ttyIAX and add
ModemDialCmd: ATDT99%s
ModemDialCmd: ATDT99%s
−
This will prefix all numbers dialled by HylaFax with 99 so they can be identified and routed by SAIL
+
{{Note box|This will prefix all numbers dialled by HylaFax with 99 so they can be identified and routed by SAIL}}