Certificates Concepts

From SME Server
Revision as of 05:48, 19 October 2014 by RequestedDeletion (talk | contribs) (Add category security)
Jump to navigationJump to search

Is this article helpful to you?
Please consider donating or volunteering
Thank you!

Self signed certificates

The certificate created by sme by default is a self signed certificate. That means it is issued by sme server and as such has not been tested or authenticated by any external certificate issuing Authority eg VeriSign & others etc.

This also means that the root certificate which is installed in most browsers by default (so the browser knows about all the commercial certificates and happily accepts them), does not know about the sme server self signed certificate, and therefore a web browser does not trust the certificate that is presented to it when a user tries to access a https site on your web server.

Therefore the users must install the self signed certificate into their browser the very first time they access your web server using https. After that they will not be asked again when they next access your site using https, as long as they are accessing from the same PC/browser. The problem is that with current generation web browsers, they issue very scary warnings that can put off many people and make them scared to access your site at all, and certainly reluctant to install a certificate about which they are being given a security breach type of warning.

There is another issue here, you should advise users to browse to https://servername.yourmaindomain.com/webmail (for example) and that name will match the name on the self signed certificate issued by sme server. That at least prevents name discrepancies, but still does not avoid the need to install the certificate on the very first https access.

Obviously external DNS records have to support that URL ie you would usually setup a wildcard in external DNS records that makes *.yourmaindomain.com resolve to your server IP.

How to change your certificate

Since SME version 7.1.3, the functionality to configure a Common Name in the certificate is included in the main SME packages and can be configured as follows:

config setprop modSSL CommonName www.domain.com
expand-template /home/e-smith/ssl.crt/crt
expand-template /home/e-smith/ssl.key/key
signal-event domain-modify
signal-event email-update 

see this forum thread [1] and bug report [2]

Expiration time of the self signed certificate

One last point to note is that the sme self signed certificate is valid for one year, and it gets automatically renewed by sme server functionality on the anniversary of the installation date of the sme server OS.

So if a user installs your self signed certificate into their browser (ie the one issued by sme), then in a year or less time, they will again receive warning messages when they access your site using https, as your original security certificate has expired. The answer is for them to install the newly created certificate into their web browser again, but by that time they have forgotten what they did a year ago, and go into panic mode again and get scared of the warnings, and end up not accessing your site at all due to fear. The result, another time wasting call to your tech support line.

There is a mechanism (custom-templates) to specify how long your sme certificate will last for, eg you can change the validity to say 5 years (instead of 1 yr), if you feel that security model is acceptable, and that will save users from having to reinstall the sme certificate into their browsers every year eg they will be asked again to install it in 5 years (or less) depending when they first installed it.

See /etc/e-smith/templates/home/e-smith/ssl.crt

Copy that fragment from the templates tree to the templates-custom tree

Do

mkdir -p /etc/e-smith/templates-custom/home/e-smith/
cp /etc/e-smith/templates/home/e-smith/ssl.crt /etc/e-smith/templates-custom/home/e-smith/ssl.crt

then do

nano -w /etc/e-smith/templates-custom/home/e-smith/ssl.crt

and change the value for KEYLIFEINDAYS on the first line to say 1826 for 5 years.

To to save & exit press the following keys at the same time

ctrl x

Then you need to force sme server to immediately create a new self signed certificate (with the longer validity period) by issuing the following commands. Note to replace the filenames with the correct file/key names applicable to your server.

rm /home/e-smith/ssl.crt/servername.domain.com.crt
rm /home/e-smith/ssl.key/servername.domain.com.key
rm /home/e-smith/ssl.pem/servername.domain.com.pem
signal-event post-upgrade
signal-event reboot

or to more thoroughly remove all old & unwanted files do the following (make a backup of files in these folders first, if you have commercial certificates). You should answer y to accept each file removal one at a time.

rm /home/e-smith/ssl.crt/*
rm /home/e-smith/ssl.key/*
rm /home/e-smith/ssl.pem/*
signal-event post-upgrade
signal-event reboot

Then add the new 5 year certificate to your browser, and no more questions from your browser until five years time when the certificate validity expires.

Commercial certificates

If you use a commercially available certificate & pay money for it, the organisation who issues the certificate pays big money to Microsoft & Mozilla etc to have their root certificate installed in the browser by default. That's why if you use a good quality commercial certificate on your server, then when a visitor to your site accesses https://.... , they will not be asked anything about the certificate mismatching or not being installed etc, as the browser already knows that certificates from say VeriSign are legitimate and happily accepts the connection without question, as it is already trusted. Same for other major brands of commercial certificates.

Tips for incorporating a commercial certificate into sme server can be found in this forum post

http://forums.contribs.org/index.php/topic,37634.0.html

The process requires that the crt & key files provided by your commercial certificate issuer, be copied to your sme server (by whichever means is most suitable for you eg place them in an ibay and copy using ssh/Putty). Typically the appropriate file type would be copied to each of:

/home/e-smith/ssl.crt/
/home/e-smith/ssl.key/

In the process of copying it is OK to overwrite the existing files if they are the same name. It's also a good idea to delete any existing files in those folders, to keep your system clean.

Then issue the following db commands so that sme server knows about these these "commercial certificate" files, rather than using the default "self signed" certificate files.

config setprop modSSL crt /home/e-smith/ssl.crt/{domain}.crt
config setprop modSSL key /home/e-smith/ssl.key/{domain}.key

Note to replace {domain}.crt and {domain}.key with the actual names of your files eg yourdomain.com.crt and yourdomain.com.key

Follow the above commands with either:

signal-event console-save
signal-event reboot

or

signal-event post-upgrade
signal-event reboot

When initially creating and ordering the certificate and supplying the domain name(s) to your chosen commercial supplier, you must include all domains that your server is hosting. sme server only supports one ssl certificate, so therefore to avoid errors for https access using any hosted domain name, the certificate must be created correctly. sme does not cater for multiple certificates for different domains, as it is not technically possible.

Migrating commercial certificates from Windows to Linux

Based on this forum post http://forums.contribs.org/index.php/topic,46752.0.html

This example refers to migrating a free StartCom SSL certificate from a Windows SBS 2008 Server to a SME server.

StartCom give out free SSL certificates compatible with IE and Firefox which are only good for HTTPS.

To migrate the SSL certificate (rather than buying & installing a new one) follow these instructions: http://rackerhacker.com/2007/03/23/exporting-ssl-certificates-from-windows-to-linux/

The end result is you have the two files, .key and .crt. Do not implement the last three steps re importing the certificate to Apache, instead follow the instructions here: http://wiki.contribs.org/Certificates_Concepts#Commercial_certificates

Testing the migration before final deployment

Once the SME server is restarted, you can test the certificate from a Windows workstation (without disrupting the customers site) by doing:

1. Add the FQDN and internal IP Address of the SME server to the file

c:\windows\system32\drivers\etc\hosts

in the same format as the sample in the file.

2. Ping the FQDN of the SME server (the public FQDN, not the local one) to test it resolves correctly to the new SME server's internal IP address.

Then open a web browser to the SME server using HTTPS.

The address bar of the browser should correctly display the acceptance of the certificate instead of the usual "Do you want to accept this untrusted site..." message.

Freely available certificates

If you choose to create your own certificate using one of the Howtos eg the CACert Howto, then the first time visitors access your site (https), they will still get asked to install the certificate into their browser. This is because CACert does not pay Microsoft $10,000 or more regularly to have their root certificate automatically installed in Internet Explorer (& updates which also update the root certifcate) etc. The same goes for other major brands of web browsers, although work is progressing to improve the relationship between CACert & other free certificate issuers and various web browser authors.

You can refer your visitors to the CACert website and get them to install the CACert root certificate and they will no longer be questioned about the certificate on your server, as your CACert certificate is now trusted by their browser (as it has the CACert root certificate installed). You can go either way really, get users to install your CACert certificate or get them to install the CACert root certificate.

You will still have renewal issues with CACert certificates for example, as they are only valid for 6 months, unless you join the special recognition program and show proof of identity to a authorised human being in your area, when they are then valid for 2 years. Ultimately at some time in the future, you will need to renew the CACert certificate, and install that new certificate onto sme server. Then when a user's web browser accesses https for the first time, it will object to the authenticity of the new certificate, thus needing to be reinstalled again, or install the CACert root certificate again. You can't win actually as users will always be chasing their own tail reinstalling certificates, albeit infrequently !

Problem with email client

Also if using the self signed certificate, instead of configuring your email client to use say mail.yourdomain.com for sending and receiving mail server names, then change that to servername.yourdomain.com, and that way the email client will not create a warning/error each time you access the mail system on your server ie by clicking the Send/Receive button in the email client ie the certificate name will match the requested server name.

Multiple domains

If you have multiple hosted domains, then you may need to use a certificate that covers all those domains, if you want users to access individual domain name URLs, the CACert How to details that. Otherwise if using the self signed certificate just get users to access https://servername.maindomain.com/webmail irregardless of whether they are using a different domain for their receiving/sending email address. In webmail, change the default senders address for each user to match the domain they are supposed to be using. Note that sme server only has one version of webmail installed and it serves all users of all domains.

Custom Certificate

(Provided by jester November 2010) There is also the possibility one is getting a custom certificate from an Intermediate Certificate Authority, if this is the case you'll get one or more intermediate certificates, establishing a "chain of trust" from your own certificate to a trusted root CA.

  • If more than one intermediate certificate, concatenate them into a single certificate chain file:
 cat <intermediate1>.crt <intermediate2>.crt <intermediate3.crt> > <chain-file-name>.crt

  • Create a place to put the chained certificate:
 mkdir /home/e-smith/ssl.chainfile
 chmod 700 /home/e-smith/ssl.chainfile
  • Copy the certificate chain file to its location:
 cp <chain-file-name>.crt /home/e-smith/ssl.chainfile/
  • Configure the SME database:
 config setprop modSSL CertificateChainFile /home/e-smith/ssl.chainfile/<chain-file-name>.crt
  • Apply the changes:
 signal-event post-upgrade; signal-event reboot

You can use the service at https://ssltools.geotrust.com/checker/views/certCheck.jsp to check your installation.

Hope all the above makes sense.

Read it again carefully and slowly if it doesn't.

This article is based on information given by mary in this thread in the contribs.org Forums.