Mailman/fr
Mailman
Mainteneur
stephdl Stéphane de Labrusse AKA Stephdl
Version
Description
Mailman est un logiciel gratuit de gestion des discussions par courrier électronique et des listes de lettres d'information électroniques. Mailman est intégré au Web, ce qui permet aux utilisateurs de gérer facilement leurs comptes et aux propriétaires de listes d'administrer leurs listes. Mailman prend en charge l'archivage intégré, le traitement automatique des retours, le filtrage de contenu, la livraison de résumé, les filtres anti-pourriels, etc.
Merci à Gordon Rowell pour le dévelopement du paquet.
Installation
yum install smeserver-mailman --enablerepo=smecontribs
- for sme8, sme9
yum install smeserver-mailman --enablerepo=smecontribs signal-event mailman-update
ou si vous voulez redémarrer votre serveur :
signal-event post-upgrade;signal-event reboot
Vous devriez maintenant voir une section Mailman sous la section Configuration du gestionnaire du serveur. Veuillez consulter les problèmes connus ci-dessous pour configurer votre session mailman. Gardez à l'esprit que le mot de passe administrateur mailman n'est pas le même que celui du serveur SME, Lisez la section ci-dessous pour voir comment trouver votre mot de passe.
Configuration
Créer des listes
Error: You are not authorized to create new mailing lists
L'administrateur du serveur SME KOOZALI n'est pas autorisé à créer des listes (même depuis le gestionnaire du serveur), voici comment obtenir le mot de passe administrateur mailman : voir bugzilla:7836.
[root@sme8dev64 ~]# config show mailman
mailman=service
SitePass=[VOTRE_MOT_DE_PASSE_EST_ICI]
status=enabled
Vous devez utiliser la valeur de SitePass comme mot de passe mailman pour créer des listes. Si vous changez ultérieurement le mot de passe avec /usr/lib/mailman/bin/mmsitepass, vous *DEVEZ* mettre à jour SitePass par :
config setprop mailman SitePass VOTRE_MOT_DE_PASSE
Error: Unknown virtual host: xxxxxx.xx
Go to http://domain.name/mailman to create new lists.
If your SMEServer has multiple domains configured, do not prepend www. before the virtual domain.
For example: go to http:// virtualdomain.name/mailman to create lists for that domain name.
Keep in mind that no list can have the same name as an ibay, group or an user so choose the name carefully.
"www" instead of "apache
But if you are not running the contribs compiled version, Mailman's management interface shows up with a CGI error message. It complains about group mismatch error between "www" and "apache". Login as root and apply the following workaround, which was suggested in bugzilla:6425:
id -u apache # should yield 48 id -u www # should yield 102 usermod -u 102 -o apache # makes apache user and www user identical groupmod -g 102 -o apache # make apache group and www group identical
File locations
| Location | Description |
|---|---|
| /var/lib/mailman | location of mailman lists and archives |
| /usr/lib/mailman | location of mailman program files |
| /usr/lib/mailman/aliases | location of qmail alias files |
Command line options
You can do a lot using the command line scripts located in /usr/lib/mailman/bin
For example
| /usr/lib/mailman/bin/mmsitepass | will set the master password for all lists |
| /usr/lib/mailman/bin/list_members [listname] | will list the members of [listname] |
| /usr/lib/mailman/bin/list_admins [listname] | will list all admins of [listname] |
| /usr/lib/mailman/bin/list_lists | will list your mailling lists |
| /usr/lib/mailman/bin/list_owners | will list all owners of mailling lists or will list all mailling list |
Running the script with --help will display the options available
Transferring Lists
You can transfer lists from another server and keep everything in tact. It's an easy process but the Mailman FAQ and info seems to be sparse and complicated. This simplifies everything.
OLD SERVER
First stop the mailman service.
/etc/init.d/mailman stop
Next, tar/zip up the lists.
tar -czvf /temp/mailman.tar.gz /var/lib/mailman
Next, transfer it onto the new server using scp or rsync:
scp -P <sshportnumber> /temp/mailman.tar.gz <newserverip>:/var/lib
or
rsync --progress -te "ssh -p <sshportnumber>" /temp/mailman.tar.gz <newserverip>:/var/lib
NEW SERVER
Change to the rpm location.
cd /install
Install the rpms.
yum localinstall mailman-* smeserver-mailman-*
Extract/untar/unzip the tar/zip file.
tar -xvzf /var/lib/mailman.tar.gz
The lists are transferred but the SME SERVER doesn't know about them. Let the server know about the list:
signal-event mailman-addlist <listname>
All your lists and lists' configurations should now be available at: http://domain.name/mailman
Personalization
If you want to enable personalization in mailman (make every mail sent with the name of the recipient in the to: field as example or add the name of the user on the text) you do this:
- Create the custom-templates tree, in case it does not exist already: mkdir -p /etc/e-smith/templates-custom/usr/lib/mailman/Mailman/mm_cfg.py/
- Copy the hostname file from the templates tree to the templates-custom tree maintaining the directory layout: cp \ /etc/e-smith/templates/usr/lib/mailman/Mailman/mm_cfg.py/30hostname \ /etc/e-smith/templates-custom/usr/lib/mailman/Mailman/mm_cfg.py/30hostname
- Now we need to add one line to the custom template fragment to enable personalization: echo OWNERS_CAN_ENABLE_PERSONALIZATION = 1 >> \ /etc/e-smith/templates-custom/usr/lib/mailman/Mailman/mm_cfg.py/30hostname
- To refelct your changes we need to regenerate the file using the following commands: expand-template /usr/lib/mailman/Mailman/mm_cfg.py signal-event reboot
- After the server comes back up again enter your mailing list admin and go to non-digest and in "Should Mailman personalize each non-digest delivery?" choose either yes or full personalization. Test both to see wich one do you like more... Also if you want to add a header with the person name enter in "Header added to mail sent to regular list members" this: Hello dear %(user_name)s and mailman is going to replace the string with the name the person used when he/she subscribed.
Import lists from ezmlm
Get the script ezmlm2mbox from http://www.arctic.org/~dean/scripts/ezmlm2mbox
wget http://www.arctic.org/~dean/scripts/ezmlm2mbox -O
Get subscribers:
ezmlm-list /home/e-smith/files/ezmlm/lists/mylist > mylist.subscribers
Get denied subscribers:
ezmlm-list /home/e-smith/files/ezmlm/lists/mylist deny > mylist.deny
Convert the ezmlm list to an mbox-file: ./ezmlm2mbox /home/e-smith/files/ezmlm/lists/mylist > mylist.mbox Backup the ezmlm list, just in case ...
tar -czf mylist.tgz /home/e-smith/files/ezmlm/lists/mylist
Then using the server-manager:
- Remove the ezmlm list, via the ezmlm web panel
- Create the new Mailman list, via the Mailman web panel
- Add subscribers to the new list, using the file you made in step 1. I prefer to do this in silence, without letting the subscribers know.
- Check the file mylist.deny from step 2, and - if needed - adjust the settings of your new list accordingly.
Import the mbox to Mailman
cp mylist.mbox /var/lib/mailman/archives/private/mylist.mbox/mylist.mbox /opt/mailman/bin/arch --wipe mylist
Check and fix ownerships and access rights
/opt/mailman/bin/check_perms -f
from : https://forums.contribs.org/index.php/topic,53230.0.html
For more information
Mailman website http://www.list.org/ Mailman FAQ http://www.python.org/cgi-bin/faqw-mm.py?req=all
Current Issues
- Check submitted bugs in the bug tracker under the contrib component "smeserver-mailman"
- Current mailman release is 2.1.9
Bugzilla:2411: /usr/lib/mailman/aliases and /var/lib/mailman are not currently backed up
Bugs
Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-mailman component or use this link .
| ID | Product | Version | Status | Summary (2 tasks) ⇒ |
|---|---|---|---|---|
| 11948 | SME Contribs | 10.0 | CONFIRMED | NFR add property and fragment to allow personalization |
| 11938 | SME Contribs | 10.0 | CONFIRMED | as mailman create the list for a specific domain we should use the domain in account entry as we do for pseudonyms |
Changelog
Only released version in smecontrib are listed here.
- apply locale 2024-09-05.patch
- apply locale 2022-11-11 patch
- Re-build and link to latest devtools [SME: 11997]
